'EP703904 'O' rings'. Black coloured, injection moulded EPDM 'O' rings. Shore hardness 70. Tested in-radius size between 0.5mm & 3.0mm. 'EP703904 Gasket Seal Rings’ were added to the approval in June 2024. Black coloured, injection moulded EPDM gasket seal rings. Shore hardness 70. Tested in-radius size between 0.75mm & 2.0mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

240155050

Expiry date:

31/01/2029

Approval Holder:

Freudenberg Industrial Services GmbH

Company Name

Freudenberg Industrial Services GmbH

Address

Albert-Schweitzer-Ring 1, 22045 Hamburg

Country

Germany

View All Listings by this Company

'E13970'. Black coloured, injection moulded EPDM material. Shore hardness 65. Tested in-radius size 1.3mm. For use with water up to 23°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240955014

Expiry date:

30/09/2029

Approval Holder:

Berwin Polymer Processing Group

Company Name

Berwin Polymer Processing Group

Address

Broadway, Globe Lane Industrial Estate, Dukinfield, Cheshire

Postcode

SK16 4UJ

View All Listings by this Company

'NBR N65WKZ'. Black coloured, injection moulded NBR rubber material. Shore hardness 59. Tested in-radius 1.0mm. For use with water up to 23°C.

Section:

5395 Rubbers

Section Subtitle:

Nitrile (Acrylonitrile Butadiene) material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250255002

Expiry date:

28/02/2030

Approval Holder:

Duram Industries A.C. Ltd.

Company Name

Duram Industries A.C. Ltd.

Address

Kibbuts Ramat, Hakovesh, 44930

Country

Israel

View All Listings by this Company

'NE7130 Grey 60'. Light grey coloured, injection moulded silicone rubber material. Shore hardness 60. Tested in-radius size 1.97mm. For use with water up to 85°C.

Section:

5415 Rubbers

Section Subtitle:

Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

241255002

Expiry date:

31/12/2029

Approval Holder:

Jiangmen Moon Shower Sanitaryware Co., Ltd.

Company Name

Jiangmen Moon Shower Sanitaryware Co., Ltd.

Country

China

View All Listings by this Company

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The main body incorporates a plastic flow regulator and stainless steel strainer prior to the solenoid. The inlets to the main body of the GS10, CM10 & GH10 model variants incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. These models also have a manual temperature control operated by a single lever on the side of the body. The inlet hoses incorporate a TPE gasket. The models are supplied with or without a pop-up waste. The GS20 & GM20 model variants are single feed. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

240704045

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) captive nut flexi hose

Marking:

Aquis etched on body.

Installation Requirements:

R001 R006 R570

Expiry date:

31/07/2029

Model:

161.00Z.FFKKKK - Ultra GS10 161.01Z.FFKKKK - Ultra GS10 161.10Z.FFKKKK - Ultra GS10 161.10XY.FFKKKK - Ultra GS10 161.04Z.FFKKKK - Ultra GS20 161.05Z.FFKKKK - Ultra GS20 161.14Z.FFKKKK - Ultra GS20 161.00XY.FFKKKK - Ultra GS20 162.00Z.FFKKKK - Ultra GM10 162.01Z.FFKKKK - Ultra GM10 162.10Z.FFKKKK - Ultra GM10 162.10XY.FFKKKK - Ultra GM10 162.04Z.FFKKKK - Ultra GM20 162.05Z.FFKKKK - Ultra GM20 162.14Z.FFKKKK - Ultra GM20 162.00XY.FFKKKK - Ultra GM20 163.00Z.FFKKKK - Ultra GH10 163.01Z.FFKKKK - Ultra GH10 163.10Z.FFKKKK - Ultra GH10 163.10XY.FFKKKK - Ultra GH10 Product no. I Z (accessories without influence of water pathway) 0 = standard without additional accessories 1 = incl. pop-up waste 6 = Varioconnect 7 = Varioconnect incl. pop-up waste 8 = incl. Solar 9 = incl. Solar and pop-up waste Product no. II X (power supply without influence of water pathway) 0 = Lithium battery 1 = Mains, surface mounted 2 = Mains, flush-mounted 3 = Alkaline battery 4 = Varioconnect 8 = incl. Solar Y (accessories without influence of water pathway) 0 = standard without additional accessories 1 = incl. Pop-up waste FF (colour) 00 = Brushed Nickel 11 = Chrome 22 = Polished Brass 44 = Satin Finished KKKK (customer/country variant) No influence on water pathway.

Approval Holder:

Aquis Systems AG

Company Name

Aquis Systems AG

Address

Balgacherstrasse 17 9445 Rebstein Switzerland

View All Listings by this Company