'EWDRI 50, EWDRI 55, EWDRI 60, EWDRI 65, EWDRI 70 & EWDRI 80'. Black coloured, compression moulded EPDM rubber materials. Shore hardness between 50 & 80. Tested in-radius size 0.69mm. 'EWDRI 50' is for use with water up to 70°C. 'EWDRI 55, EWDRI 60, EWDRI 65, EWDRI 70 & EWDRI 80' are for use with water up to 60°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2202549

Expiry date:

28/02/2027

Approval Holder:

Deesawala Rubber Industries

Company Name

Deesawala Rubber Industries

Address

5-5-65/S12A, S.A. Trade Centre, Ranigunj 'X' Road, Secunderabad, Pin-500003, Telengana

Country

India

View All Listings by this Company

'CE EPDM (TY-02-50) & CE EPDM (TY-05-80)'. Black coloured, compression moulded EPDM sheet materials. Shore hardness between 50 & 80. Tested in-radius size between 0.75mm & 1.0mm. For use with water up to 23°C. From February 2024 the materials are for use with water up to 65°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2211533

Expiry date:

30/11/2027

Approval Holder:

Chandranchal Efforts PVT. LTD.

Company Name

Chandranchal Efforts PVT. LTD.

Address

SY.NO 75/U 76/A Village Chegunta, Dist. Medak Hydrabad -502 255 Telengna

Country

India

View All Listings by this Company

'Seat Seal S1 & S2'. Black coloured (S2) or white coloured (S1), injection moulded silicone rubber components. Shore hardness 80. Tested in-radius size between 0.65mm & 1.54mm. For use with water up to 85°C.

Section:

5410 Rubbers

Section Subtitle:

Silicone - components.

WRAS Approval Number:

2205548

Expiry date:

31/05/2027

Approval Holder:

Flühs Drehtechnik GmbH

Company Name

Flühs Drehtechnik GmbH

Address

Lösenbacher Landstr. 2, D-58515 Ludenscheid - Brugge

Country

Germany

View All Listings by this Company

'Astral PVC Gel'. Clear, transparent (un-pigmented) solvent cement, (intended to join PVC pipe and fittings). Apply as per manufacturer's instructions review date '2019-09-11'. Cure for 20 days at 7°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5560 Solvent Cements

Expiry date:

31/07/2026

Approval Holder:

FLUIDRA Global Distribution

Company Name

FLUIDRA Global Distribution

Address

Avda Alcalde Barnils 69, 08174 St Cugat del Vallès, Barcelona

Country

Spain

View All Listings by this Company

Range of wall mounted electric showers (various finishes). The GSD/BETTER models incorporate a solenoid valve controlling the flow, which includes a combined plastic and stainless steel strainer and a plastic flow regulator on its inlet. The GSM/DSK/ENTRY models incorporate a manually operated push button valve controlling the flow and plastic strainer on the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 53°C. Cold supply only.

Section:

1361 Heaters

Section Subtitle:

Electric Shower

WRAS Approval Number:

2203362

Size:

15mm plastic pipe.

Marking:

E-tec, model, address and other technical information on adhesive label on bottom panel.

Installation Requirements:

R001 R040

Expiry date:

31/03/2027

Model:

GSMxx. DSKxxT. GSDxx. GSDPBxx. GSDTGxx. Models added January 2024: ENTRYXX. BETTERXX. Where xx denotes kW rating: 75 (7.5kw), 85 (8.5kW), 95 (9.5kW) and 105 (10.5kW). All models are white finish, except for GSDPB = piano black, and GSDTG = titanium grey.

Approval Holder:

Xiamen E-Tec Electric Shower Co., LTD

Company Name

Xiamen E-Tec Electric Shower Co., LTD

Address

No.11, HaiJing East 2nd Road, Xiamen Area of China (Fujian) Pilot Free Trade Zone.

View All Listings by this Company