Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2304516

‘EE8000 – 5006836 & EE8000-5006835'. Factory applied, blue coloured epoxy powder coatings. Apply by fusion bond dip as per Product Data Sheet 'version 5.0' dated '25/07/2024'. Cure for 7 minutes@200°C. For use with water up to 70°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2304516
Expiry date:: 30/04/2028

Approval Holder:: PPG Huajia Technology (Huangshan) Co., Ltd.

Company Name
PPG Huajia Technology (Huangshan) Co., Ltd.
Address
Huangshan Branch, No. 668 Yongjia Avenue, HuiZhou District, Huangshan City
Country
China

View All Listings by this Company

WRAS Approval Number: #2304530

‘KUBOTA SEAL AC’. Factory applied, colourless acrylic resin coating. Apply as per manufacturer’s instructions ‘ref. no. 65700H-2.3’ dated 'Mar. 14.2017'. Cure for 7 days@27°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2304530
Expiry date:: 30/04/2028

Approval Holder:: KUBOTA Corporation

Company Name
KUBOTA Corporation
Address
1-3, Kyobashi 2-chome, Chuo-ku Tokyo, 104-8307
Country
Japan
Phone
+81-90-2492-1627

View All Listings by this Company

WRAS Approval Number: #2304531

‘V-PET#1600 Gray F’. Factory applied, dark grey coloured epoxy resin powder coating. Apply as per manufacturer’s instructions ‘ref.no. VP1600-PD-170412’, dated '12th April 2017'. Cure for 10 minutes@200°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2304531
Expiry date:: 30/04/2028

Approval Holder:: KUBOTA Corporation

Company Name
KUBOTA Corporation
Address
1-3, Kyobashi 2-chome, Chuo-ku Tokyo, 104-8307
Country
Japan
Phone
+81-90-2492-1627

View All Listings by this Company

WRAS Approval Number: #2304532

'5013 High chlorinated polyethylene anticorrosive coating'. Factory applied, blue coloured polyethylene coating. Apply as per manufacturer's TDS/IFU number '001', dated '2022.11.30'. Cure for 24 hours@23°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2304532
Expiry date:: 30/04/2028

Approval Holder:: Xuzhou Guanghuan Chemical Co. Ltd.

Company Name
Xuzhou Guanghuan Chemical Co. Ltd.
Address
No. 4 Meng Gou Industrial Park, Xuzhou Economic and Technological Development Zone
Country
China

View All Listings by this Company

WRAS Approval Number: #2302557

'A/W AQUA (A) Epoxy 100'. Site applied, pale straw coloured epoxy/linseed oil waterproof coating. Apply as per manufacturer's Technical Document 'FSQP-707-05' dated '2021.01.04'. Cure for 6 hours under UV light (wavelength 365μm) at a distance of 150mm. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5042 Coatings, Paints & Linings
Section Subtitle:: Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:: 2302557
Expiry date:: 29/02/2028

Approval Holder:: FRSI Corp.

Company Name
FRSI Corp.
Address
No.315. Knowledge Industry Center, JEONNAM TECHNOPARK, 13, Yulchonsandan 4-ro, Haeryong-myeon, Suncheon-si, Jeollanam-do
Country
Korea, Republic of

View All Listings by this Company