'Iupital F10-01'. White coloured, injection moulded POM material. For use with water up to 85°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2201520

Expiry date:

31/01/2027

Approval Holder:

Global Polyacetal Co., Ltd.

Company Name

Global Polyacetal Co., Ltd.

Address

Shiodome Sumitomo-Building 25F 1-9-2, Higashi-shinbashi, Minato Ward, Tokyo 105-0021

Country

Japan

View All Listings by this Company

'ABS-001 (natural - appears off-white), ABS-002 (white), ABS-003 (grey), ABS-004 (blue), ABS-005 (green) & ABS-006 (pink)'. Injection moulded ABS (with Biomaster 612 added) materials. For use with water up to 70°C.

Section:

5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)

Expiry date:

31/01/2027

Approval Holder:

Multishower GB Ltd.

Company Name

Multishower GB Ltd.

Address

182 Kiloatten Road, Londonderry Northern Ireland

Postcode

BT47 3SR

Country

United Kingdom

Phone

02033569769

General Email

callen@medi-shower.co.uk

View All Listings by this Company

‘Inertol BS10’. Factory applied, black coloured bitumen coating. Apply and cure as per manufacturer’s instructions 'BF-T06', issue number '03' dated 01.12.2021. For use with water up to 60°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials listed in this section are not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

2202508

Expiry date:

28/02/2027

Approval Holder:

Samsun Makina Sanayi A.S.

Company Name

Samsun Makina Sanayi A.S.

Address

Organize Sanayi Bolgesi, Yasar Dogu Caddesi, No. 33 P.K. 136

Country

55267 Kutlukent,

View All Listings by this Company

'V- SRPC Portland Cement'. Factory applied, grey coloured Portland Cement. Mixx Sand:water:cement in a weight ratio of 0.6:1.0:0.22. Cure for 96 hours@26°C and then 576 hours@32°C. For use with water up to 65°C.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2201514

Expiry date:

31/01/2027

Approval Holder:

ESL Steel Limited

Company Name

ESL Steel Limited

Address

Village Siyaljori, P.O. Jogidh O.P Bangaria, P.S. Siyaljori Dist - Bokaro, Jharkhand

Country

India

View All Listings by this Company

'Tecnocoat P-2049'. Factory applied, two component, grey coloured polyurea coating. Mix components A & B in a weight ratio of 1:1 and apply as per manufacturer's TDS 'v. 20-03-2022'. Cure for 48 hours@23°C. Between September 2022 and August 2024, the coating is for use with water up to 23°C. From September 2024, the coating is for use with water up to 60°C. This material is only approved for the mixing, curing & soaking conditions that appear on the approval. If the mix/cure/soak conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2209500

Expiry date:

30/09/2027

Approval Holder:

Tecnopol Sistemas S.L.U

Company Name

Tecnopol Sistemas S.L.U

Address

Finlàndia, 33 Les Franqueses del Vallès, 08520 Barcelona

Country

Spain

View All Listings by this Company