Directory Search Results

Fittings Materials
Print List

#240455030

'80-ADX-EPW/TN NR.3'. Black coloured, extruded EPDM hose. Shore hardness 80. Tested in-radius size 0.75mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
240455030
Expiry date:
30/04/2029
Approval Holder:
POSA S.p.A.
Company Name
POSA S.p.A.
Address
Via S.Francesco d'Assisi 330, 20861 Brugherio (MB)
Country
Italy

View All Listings by this Company

Print This Approval

#240555023

'FFE7018F'. Black coloured, compression moulded EPDM gaskets and 'O' rings. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
240555023
Expiry date:
31/05/2029
Approval Holder:
Zhejiang Feifu Automatic Control Equipment Co., Ltd.
Company Name
Zhejiang Feifu Automatic Control Equipment Co., Ltd.
Address
No. 549 Bingang Avenue, Shamen Bingang Industrial City, Yuhuan, Zhejiang
Country
China

View All Listings by this Company

Print This Approval

#241055002

'EP801324C'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241055002
Expiry date:
31/10/2029
Approval Holder:
Fannteer Corporation
Company Name
Fannteer Corporation
Address
2F, No. 77, Zhouzi Street, Neihu District, Taipei City 114680
Country
Taiwan
Phone
+886 2 2577 4691
General Email
info@fannteer.com.tw

View All Listings by this Company

Print This Approval

#2210563

'CH EP 160 DM'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210563
Expiry date:
31/10/2027
Approval Holder:
DIS MRP Seals (p) Ltd.
Company Name
DIS MRP Seals (p) Ltd.
Address
DP4, Sidco Industrial Estate, Arakkonam, Ranipet Dist, Tamil Nadu, 631 005
Country
India

View All Listings by this Company

Print This Approval

#240755005

'EP02971PWRC'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755005
Expiry date:
31/07/2029
Approval Holder:
Yaw-Yew Rubber Co. Ltd.
Company Name
Yaw-Yew Rubber Co. Ltd.
Address
No. 49-38, Fanshe St. Fuxing Township, Changhua County
Country
Taiwan
Phone
+886-4-7783390

View All Listings by this Company

Print This Approval

#240455039

'LSR 8220, LSR 8230, LSR 8240, LSR 8250, LSR 8260 & LSR 8270'. Natural (clear coloured), compression moulded liquid silicone rubber materials. Shore hardness between 20 & 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5415 Rubbers
Section Subtitle:
Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240455039
Expiry date:
30/04/2029
Approval Holder:
Jiangxi Bluestar Xinghuo Silicones Co. Ltd.
Company Name
Jiangxi Bluestar Xinghuo Silicones Co. Ltd.
Address
Xinghuo Industrial Park, Yongxiu County, Jiujiang City, Jiangxi Province
Country
China

View All Listings by this Company

Print This Approval

#240455050

`Loctite 587`. Blue coloured silicone sealant. Apply as per manufacturer`s TDS dated November 2004. Cure for 7 days at 7°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5500 Sealants - Flat Faced Joints
Section Subtitle:
Silicone.
WRAS Approval Number:
240455050
Expiry date:
30/04/2029
Approval Holder:
Henkel Loctite (China) Co., Ltd.
Company Name
Henkel Loctite (China) Co., Ltd.
Address
928 Zhangheng Road, Pudong, Shanghai, 201203
Country
China

View All Listings by this Company

Print This Approval

#2312566

‘WEICONLOCK AN 305-77’. Yellow coloured anaerobic adhesive paste. This product is to be applied and cured in strict accordance with the manufacturer's instructions. For use with water up to 85°C.

Section:
5520 Sealants - Screwed Joints
Section Subtitle:
Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions
WRAS Approval Number:
2312566
Expiry date:
31/12/2028
Approval Holder:
Weicon GmbH & Co. KG
Company Name
Weicon GmbH & Co. KG
Address
Koenigsberger Strasse 255, 48157 Muenster
Country
Germany

View All Listings by this Company

Print This Approval

#240355048

'ONE BOND 116'. Blue coloured anaerobic adhesive. For use with water up to 85°C. These products are to be applied and cured in strict accordance with the manufacturer's instructions.

Section:
5520 Sealants - Screwed Joints
Section Subtitle:
Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions
WRAS Approval Number:
240355048
Expiry date:
31/03/2029
Approval Holder:
Saint-Gobain Abrasives
Company Name
Saint-Gobain Abrasives
Address
251 Rue de l'Ambassadeur, 78700 Conflans
Country
France

View All Listings by this Company

Print This Approval

#2312569

‘ONE BOND 70’. Yellow coloured anaerobic adhesive paste. For use with water up to 85°C. These products are to be applied and cured in strict accordance with the manufacturer's instructions.

Section:
5520 Sealants - Screwed Joints
Section Subtitle:
Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions
WRAS Approval Number:
2312569
Expiry date:
31/12/2028
Approval Holder:
Saint-Gobain Abrasives
Company Name
Saint-Gobain Abrasives
Address
251 Rue de l'Ambassadeur, 78700 Conflans
Country
France

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 502 of 789

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.