Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #240102706

Range of bedpan washing & disinfection machines. The flow is controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure - See models Maximum operating temperature - 90 °C

Section:: 2360 Washing Machines
Section Subtitle:: Bedpan and disinfecting. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:: 240102706
Size:: ½” BSP (M)
Marking:: Stanbridge on control panel. Stanbridge, serial number and company information on date plate on front panel.
Installation Requirements:: R001
Expiry date:: 31/01/2029
Model:: CS1 ST – 000101 – 4.14 Bar CS2 ST – 000-201 – 4.14 Bar CS3 ST – 000-301 – 4.14 Bar CS3 HD – 000-302 – 8.00 Bar Slimline – 000-401 – 8.00 Bar

Approval Holder:: Stanbridge Ltd

Company Name
Stanbridge Ltd
Address
Unit 78, Powder Mill Lane Quester Estate Dartford
Postcode
DA1 1JA
Country
United Kingdom
Phone
+44 (0)1689 806500
General Email
claire@stanbridge.co.uk

View All Listings by this Company
Manufacturer:: Stanbridge Ltd

Company Name
Stanbridge Ltd
Address
Unit 78, Powder Mill Lane Quester Estate Dartford
Postcode
DA1 1JA
Country
United Kingdom
Phone
+44 (0)1689 806500
General Email
claire@stanbridge.co.uk

View All Listings by this Company

WRAS Approval Number: #240102709

Range of commercial washing machines with flow controlled by solenoid valves and discharged via type AB air gap assembly (verified by test - suitable for backflow protection against fluid category 5). The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5 Bar. Maximum operating temperature 60°C.

Section:: 2370 Washing Machines
Section Subtitle:: Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:: 240102709
Size:: Stainless steel braided silicone lined flexible hose assemblies with 3/4" BSP captive nut end connections.
Marking:: Renzacci on front panel, Renzacci, model, product info on data plate on rear panel
Installation Requirements:: R001 R160
Expiry date:: 31/01/2029
Model:: HS9, HS11, HS13, HS18, HS24, HS28, HS35 LX16, LX16 E-SPEED, LX22, LX22 E-SPEED, LX35, LX35 E-SPEED SX11, SX11 E-SPEED, SX14, SX14 E-SPEED, SX16, SX16 E-SPEED, SX22, SX22 E-SPEED, SX35, SX35 E-SPEED WB25, WB35 LX55, LX55 E-SPEED HS, LX, LX E-SPEED, SX, SX E-SPEED models are single door with front loading WB models are double door barrier with side loading. Models added December 2024 HS55, HS90, LX55, LX E-SPEED, LX70, LX70 E-SPEED, LX120, SX55, SX55 E-SPEED, WB70

Approval Holder:: Renzacci SPA – Industria Lavatrici

Company Name
Renzacci SPA – Industria Lavatrici
Address
Via Morandi, 13 - 06012 Citta Di Castello PG Italy

View All Listings by this Company
Manufacturer:: Renzacci SPA – Industria Lavatrici

Company Name
Renzacci SPA – Industria Lavatrici
Address
Via Morandi, 13 - 06012 Citta Di Castello PG Italy

View All Listings by this Company

WRAS Approval Number: #240855001

'DURACON® EX-09 WK2001' & 'EX-09 WK2001BG'. White coloured, injection moulded acetal materials. For use with water up to 85°C.

Section:: 5015 Acetal
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 240855001
Expiry date:: 31/08/2029

Approval Holder:: Daicel Corporation

Company Name
Daicel Corporation
Address
JR Shinagawa East Building, 18-1, Konan 2-Chome, Minato-Ku, Tokyo, 108-8280
Country
Japan
Phone
+81 3 6711 8605 Fax: +81 3 6711 8633

View All Listings by this Company

WRAS Approval Number: #240255033

'ELECTROCOAT BP 1119'. Factory applied, black coloured Bituminous Paint. Apply as per manufacturer's TDS Document No: 'ECL/ TDS / BP-1119-Bituminous Paint', Issue Date '10-Aug-20', Version No: '01'. Cure for 12 minutes at 45°C, followed by 10 hours at 28°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 240255033
Expiry date:: 28/02/2029

Approval Holder:: Electrosteel Castings Ltd.

Company Name
Electrosteel Castings Ltd.
Address
30 B.T. Road, PO Sukchar, District 24 Parganas (N) West Bengal, Kolkata - 700115
Country
743179

View All Listings by this Company

WRAS Approval Number: #240155025

'YJ-AL2O3 95%'. White coloured, dry pressed and sintered ceramic disc. For use with water up to 85°C.

Section:: 5023 Ceramic
Expiry date:: 31/01/2029

Approval Holder:: Shanghai YJ Cartridge Co., Ltd.

Company Name
Shanghai YJ Cartridge Co., Ltd.
Address
Building 17. No.615, Fengdeng Road, Malu Town, Jiading District, Shanghai
Country
China

View All Listings by this Company