Directory Search Results

Print List

#2107131

Range of wall mounted, exposed, thermostatic bar type shower mixing valves (chromium plated brass). The246PG model incorporates a 2-way ceramic disc diverter headwork with a dome type operating member controlling the flow between an overhead shower outlet and a shower handset. The 536PG model incorporates a quarter turn ceramic disc headwork with a dome type operating member controlling the flow to a shower handset. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Both inlets incorporate a combined EPDM washer and stainless-steel strainer, as well as an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Both products are supplied with a shower hose and handset, the B36264 model also includes a shower riser to an overhead shower outlet. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2107131
Size:
¾” BSP (M) X ½” BSP (M) offset union
Marking:
SCREWFIX "Brand of Kingfisher" on valve body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2026
Model:
246PG & 536PG THERMOSTATIC BLENDING VALVES
Product Images

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#2110002

T-type mixing valve with a DZR brass body (nickel plated), temperature is controlled by a thermostatic cartridge. Each inlet incorporates a combined EPDM washer and stainless steel strainer, and a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). For use with copper pipe manufactured to EN1057. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2110002
Marking:
Reliance Water Controls & Heatguard LS2 on Cap. Flow arrow and date of manufacture (D/WW/YY/LL, where LL = production line) on body.
Installation Requirements:
R001 R040 R120
Expiry date:
31/10/2026
Model:
Heatguard LS2 HEAT260500 – 15mm compression.
Product Images

Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2110363

Concealed, thermostatic shower blending valve, incorporating a brass body and a (chrome plated) functional trim set. The functional trim set comprises of two detent headworks (push to on, push to off) as the main flow control for each shower outlet, a ¼ turn ceramic disc valve with a dome type operating member controlling the flow volume, and a thermostatic cartridge controlling the temperature with a dome type operating member incorporating a manual override button. The functional trim set is also supplied with two brass assemblies comprising of a plastic filter, EPDM ‘O’-rings and an approved check valve cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. These assemblies are to be inserted into the concealed body. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2110363
Note:
This approval does not include a shower hose and handset, or overhead shower outlet. The 63001 (concealed body) is not approved in its own right.
Size:
½” BSP (F)
Marking:
Gessi on trim plate.
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2026
Model:
63001 (concealed body) + 63004 (functional trim set).
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2110368

Range of concealed, thermostatic shower blending valves, incorporating a brass body and a (chrome plated) functional trim set. The functional trim set comprises of a quarter turn ceramic disc headwork, or a 2 or 3 way ceramic disc diverter headwork (see model) with a dome type operating member controlling the flow, and a thermostatic cartridge controlling the temperature with a dome type operating member incorporating a manual override button. The functional trim set is also supplied with two brass assemblies comprising of a plastic filter, EPDM ‘O’-rings and an approved check valve cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2110368
Note:
This approval does not include a shower hose and handset, or overhead shower outlet. The 38269 (concealed body) is not approved in its own right.
Size:
½” BSP (F)
Marking:
Gessi Emporio on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2026
Model:
38269 (concealed body) + 38792 (functional trim set - quarter turn), 38269 (concealed body) + 38794 (functional trim set - 2 way), 38269 (concealed body) + 38796 (functional trim set - 3 way).
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2110371

Concealed, thermostatic shower blending valve, incorporating a brass body and a (chrome plated) functional trim set. The functional trim set comprises of a 2 way ceramic disc diverter headwork with a dome type operating member controlling the flow, and a thermostatic cartridge controlling the temperature with a dome type operating member incorporating a manual override button. The functional trim set is also supplied with two brass assemblies comprising of a plastic filter, EPDM ‘O’-rings and an approved check valve cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2110371
Note:
This approval does not include a shower hose and handset, overhead shower, or bodyjets. The 09269 (concealed body) is not approved in its own right.
Size:
½” BSP (F)
Marking:
Gessi on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2026
Model:
09269 (concealed body) + 59134 (functional trim set).
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2105053

Range of wall mounted, thermostatic, shower mixers incorporating brass bodies (various finishes) 2-way ceramic disc diverter headwork to control the flow between two shower outlets with various operating members (see model). The A47203VUK model uses two ‘detent’ (push to on push to off) headworks to control the flow to each outlet. Temperature is controlled independently via a thermostatic cartridge using various operating members (see model) that also incorporates a manual override button. The inlets incorporate a combined EPDM washer and stainless-steel strainer or stainless steel strainer (A47203VUK model) and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet of the overhead shower incorporates a combined EPDM washer and stainless-steel strainer. The products are supplied with a shower head, shower hose and handset. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2105053
Size:
See model.
Marking:
Vitra on shower head, shower handset and body
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2026
Model:
15mm compression fitting: A47200VUK 2 way with shower column ½” x ¾” offset union: A47201VUK 2 way with shower column, A47202VUK 2 way with shower column, A47205VUK 2 way with shower column, A4720536VUK 2 way with shower column, A4720534VUK 2 way with shower column, A4720526VUK 2 way with shower column, ½” x 20mm spigot offset union: A47203VUK 2 way with shower column, Model added December 2022: 15mm compression fitting A4720523VUK 2 way with shower column
Product Images

Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2203702

Range of thermostatic blending valves with brass bodies, EPDM ‘O’-rings and chromium plated dome type operating members. The inlets incorporate plastic strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2203702
Size:
¾” BSP (M) inlet and outlet.
Marking:
Delabie on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2027
Model:
SECURITHERM 792770 & SECURITHERM 792770T

Approval Holder:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company
Manufacturer:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

Print This Approval


#2110009

Range of wall mounted, thermostatic shower blending valves, with a brass body (various finishes - see model), incorporating a thermostatic cartridge controlling the temperature with various operating members (see model). Both inlets incorporate a combined EPDM washer with a stainless steel strainer and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2110009
Size:
¾” BSP (M)
Marking:
Samuel Heath on valve body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2026
Model:
V220 & V220-XX ¾” Exposed Thermo Shower Valve. Which can be supplied with the following operating member trim sets: V221-TC-XX (Ceramic Lever), V221-TM-XX (Metal Lever), V221-TS-XX (Crystal Lever), V221-TSB-XX (Crystal Lever), V221-TSC-XX (Crystal Lever), V221-TW-XX (Wooden Lever), V221-TX-XX (Cross Top). XX or XXX denotes the surface finish. It will always appear as the last digits of the product code as a combination of two or three letters or numbers. As examples: CP = chrome finish, URM urban brass matt lacquered.
Product Images

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#2109359

Range of lug type butterfly valves incorporating blue epoxy coated cast iron bodies, stainless steel discs, EPDM seats and lever type operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
2109359
Size:
see model
Marking:
Genebre, size & PN on body.
Installation Requirements:
R001
Expiry date:
30/09/2026
Model:
2108A 12 (DN100) 2108A 13 (DN125) 2108A 14 (DN150) 2108A 16 (DN200) 2108A 18 (DN250)
Product Images

Approval Holder:
Genebre, S.A
Company Name
Genebre, S.A
Address
Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat
Postcode
08908
Country
Spain
Phone
(+34) 93 298 80 00
General Email
cazorla@genebre.es

View All Listings by this Company

Print This Approval


#2201804

Range of wafer and lugged type butterfly valves incorporating blue epoxy coated cast iron bodies, stainless steel discs and EPDM seat. The closing mechanism can be controlled by either a lever, gear or bore shaft. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
2201804
Size:
25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, 125mm, 150mm, 200mm, 250mm and 300mm
Marking:
Comeval company details, Dn size, body material, disc material, Tmax, Pmax, on data plate. DN on body
Installation Requirements:
R001
Expiry date:
31/01/2027
Model:
VF700P(R) Wafer pattern VF750P(R) Lugged pattern wafer and lugged type butterfly

Approval Holder:
Comeval Valve Systems S.L y CIA., Soc. Comanditaria
Company Name
Comeval Valve Systems S.L y CIA., Soc. Comanditaria
Address
Les Rotes 15 El Puig de Santa Maria
Postcode
ES 46540
Country
Spain
General Email
carlos.ruiz@comeval.es

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 45 of 223

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.