Three hole single outlet trim sets consisting of two ceramic disk headworks and a spout with a flow straightener. Various operating members (see model section). V246 prefix model is a wall mounted spout with a flow straightener only. The products are brass bodied and available in various finishes (see model). Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2211705

Size:

Connects to V118-IS-XX installation system for wall mounted fillers, which has 22mm compression fitting inlets.

Marking:

Samuel Heath on base of Spout.

Installation Requirements:

R001 R040

Expiry date:

30/11/2027

Model:

Basic Model without Lever Option: V217-XX Fairfield Wall Mounted Basin Spout. V247-XX Fairfield Wall Mounted Bath Spout. V246-XX Fairfield Wall Mounted Bath Spout (Spout Only set). Control number once Controller is chosen: V2K17M-XX Fairfield Wall Mounted Basin Filler Trim Set with Metal Levers. V2K17C-XX Fairfield Wall Mounted Basin Filler Trim Set with Ceramic Levers. V2K17GBC-XX Fairfield Wall Mounted Basin Filler Trim Set with Gloss Black Chrome Levers. V2K17W-XX Fairfield Wall Mounted Basin Filler Trim Set with Wooden Levers. V2K17X-XX Fairfield Wall Mounted Basin Filler Trim Set with Cross Tops. V2K17SC-XX Fairfield Wall Mounted Basin Filler Trim Set with Geometric Clear Crystal Levers. V2K17SB-XX Fairfield Wall Mounted Basin Filler Trim Set with Geometric Black Crystal Levers. V2K47M-XX Fairfield Wall Mounted Bath Filler Trim Set with Metal Levers V2K47C-XX Fairfield Wall Mounted Bath Filler Trim Set with Ceramic Levers. V2K47GBC-XX Fairfield Wall Mounted Bath Filler Trim Set with Gloss Black Chrome Levers. V2K47W-XX Fairfield Wall Mounted Bath Filler Trim Set with Wooden Levers. V2K47X-XX Fairfield Wall Mounted Bath Filler Trim Set with Cross Tops. V2K47SC-XX Fairfield Wall Mounted Bath Filler Trim Set with Geometric Clear Crystal Levers. V2K47SB-XX Fairfield Wall Mounted Bath Filler Trim Set with Geometric Black Crystal Levers. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered. The tap V217-XX & V247XX (without controller) is not approved in its own right and the model section state this option must always be installed in conjunction with a controller.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of three-hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose. Maximum working pressure 10.0 Bar. Maximum operating temperature 60 °C.

Section:

0655 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2209036

Size:

Stainless steel braided, EPDM lined hose assemblies with 1/2" BSP captive nut end connections.

Marking:

SAMUEL HEATH on escutcheon on base of tap

Installation Requirements:

R001 R006 R030

Expiry date:

30/09/2027

Model:

V737V2-XX V739V2-1F-XX V739V2-2F-XX V739V2-1K-XX V739V2-2K-XX

Product Images

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Deck mounted, three-hole, combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to shower outlet. The diverter supplies two stainless steel braided EPDM lined outlet hoses, one connects to a shower hose (metal interlocked) and a deck mounted shower handset, the other is intended to connect to a spout outlet (not supplied). Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2205333

Note:

This approval does not include a spout.

Size:

Grey polymeric (PET - Polyethylene terephthalate) braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Vado on spout. Vado on shower handset. Vado on diverter body.

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2027

Model:

ZOO-232NS-CP NOT-232NS-CP LIF-132/NS-C/P

Product Images

Approval Holder:

VADO

Company Name

VADO

Address

Cheddar Business Park Wedmore Road Cheddar

Postcode

BS27 3EB

Country

United Kingdom

Phone

01934 745895

General Email

tom.ross@vado.com

View All Listings by this Company

Manufacturer:

VADO

Company Name

VADO

Address

Cheddar Business Park Wedmore Road Cheddar

Postcode

BS27 3EB

Country

United Kingdom

Phone

01934 745895

General Email

tom.ross@vado.com

View All Listings by this Company

Range of combined bath filler and overflow waste assemblies incorporating a cable operated pop-up waste. The outlet incorporates a plastic flow straightener. Maximum operating temperature 60°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2209018

Note:

No testing performed on pop-up waste. Open outlet use only.

Size:

Stainless steel braided EPDM lined flexible hose assembly with ½” captive nut end connection.

Marking:

C.G.S. S.r.l. logo and WRAS on overflow cover.

Installation Requirements:

R001 R576

Expiry date:

30/09/2027

Model:

159-AYY.XX and 157YY.XX. YY denotes the overflow hose length and can be replaced with any of the following. Blank = exact 55cm, -1 = max. 70cm, -2 = max. 80cm, -3 = max. 90cm, -4 = max. 105cm, -5 = max. 115cm, -6 = max. 125cm. XX denotes the finish and can be replaced with any of the following: 01 = Standard Chrome, 05 = PVD Chrome, 06 = Black Chrome, 12 = Gold, 15 = Rose Gold, 17 = PVD Gold, 25 = Brushed Bronze, 26 = Brushed Copper, 33 = White Matt, 35 = White, 43 = Black Matt, 45 = Black, 40 = Brushed Nickel. Code examples: 159-A.01 = exact 55cm length, standard chrome finish. 157-2.40 = 80cm max. length, brushed nickel finish.

Product Images

Approval Holder:

C.G.S. S.R.L.

Company Name

C.G.S. S.R.L.

Address

Via Torino 9/A Cureggio (NO)

Postcode

28060

Country

Italy

General Email

f.cerutti@cgsmixer.com

View All Listings by this Company

Manufacturer:

C.G.S. S.R.L.

Company Name

C.G.S. S.R.L.

Address

Via Torino 9/A Cureggio (NO)

Postcode

28060

Country

Italy

General Email

f.cerutti@cgsmixer.com

View All Listings by this Company

Spout outlet with brass body, incorporating aerator, available in different finishes. Maximum operating temperature 65°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2209329

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Villeroy & Boch logo (‘Villeroy & Boch 1748’) on face plate

Installation Requirements:

R001 R040

Expiry date:

30/09/2027

Model:

TVT127003000XX Conum XX denotes the finish and is replaced with: 61 – Chrome plated, K5 – Black matt, 76 – PVD brushed gold & 64 – Brushed nickel matt.

Product Images

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

In-line water filter system comprising of a head and replaceable carbon block cartridge (within a fixed housing) for use with John Guest LLDPE pipe. Maximum working pressure 8.6 bar. Cold water use only.

Section:

1050 Filters and Housings

Size:

3/8” pushfit

Marking:

Insinkerator, model, and product information on label on body

Installation Requirements:

R001 R120 R150 R170

Expiry date:

30/09/2027

Model:

F-701R

Product Images

Approval Holder:

InSinkErator

Company Name

InSinkErator

Address

1250 International Drive Mount Pleasant, WI 53177, USA

View All Listings by this Company

Range of solder ring copper fittings for use with copper tube to EN 1057. The 304756, 110804, 304574, 304615 & 304711 models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208816

Size:

Solder ring: 8mm-54mm and ½” - 1” (see model). Threaded connections: 1” captive nut (see model).

Marking:

CPS & date of manufacture MM/YY on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

498181, 110118, 111989, 111990, 111991, 111992 Elbow 90 degree C X C: 8mm-54mm. 500132, 111994 & 111995 Street Elbow 90 degree Ftg X C: 8mm-54mm. 111997, 112000, 112001 & 112002 Street Elbow 45 degree Ftg X C: 8mm-54mm. 498154, 110034, 111940, 111986, 111987, 111988 Straight Coupling with groove C X C: 8mm-54mm. 304382, 304416, 112086, 498587, 306202, 304559 & 694586 Fitting Reducer Ftg X C: 8mm-54mm. 304188, 111996, 110260, 110265 & 500135 Reducing Coupler C X C: 8mm-54mm and ½”-1”. 112003, 112004, 500144 & 112006 Equal TEE CxCxC: 8mm-54mm. 112005, 304344, 304347, 304378, 500155 & 500172 Reducing Tee CxCxC: 8mm-54mm. 112391, 112393 & 112394 Cap: 8mm-54mm. 304756 & 110804 Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. 304574, 304615 & 304711 Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Country

United Kingdom

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Range of solder ring brass fittings for use with copper tube (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211814

Size:

Solder ring: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

CPS, size & date of manufacture MM/YY on body.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

519390 Wallplate: 15mm-22mm x ½”-¾” BSP (F). 519392 Male Coupler: 15mm-54mm x ⅜”-2” BSP (M). 713479 & 519412 Female Coupler: 15mm-54mm x ⅜”-2” BSP (F).

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Country

United Kingdom

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Range of compression fittings with brass brass bodies for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2209321

Size:

SEE MODEL

Marking:

Navien on body.

Installation Requirements:

R001

Expiry date:

30/09/2027

Model:

LL1452AB-04X15-07-00 Elbow: 15mm compression x ½”captive nut, LL6570-03X15-00 Male coupling: 15mm compression x ⅜” BSP (M).

Product Images

Approval Holder:

KD Navien

Company Name

KD Navien

Address

95, Suworam-gil Seotan-myeon Pyeongtaek-si Gyeonggi-do, Seoul

Country

Korea, Republic of

View All Listings by this Company

Manufacturer:

Zhejiang Double-Lin Valves Co. Ltd.

Company Name

Zhejiang Double-Lin Valves Co. Ltd.

Address

Yanpan Hardware Industrial Area, Ganjiang Town, Yuhuan

Country

China

Phone

+86-576-89915157

View All Listings by this Company

‘KSO’ range of compression fittings with brass or chrome plated brass bodies for use with copper pipe (manufactured to EN1057). The KSO14 sand KSO15 tap connector models incorporate an EPDM washer. Maximum working pressure 16.0 bar. Maximum working temperature 85˚C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2204093

Size:

see model

Marking:

Flomasta (Brand of Kingfisher) and Size on fitting body EN1254-2 and Size on end nut

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

KSO01 couplings-cxc 6mm-54mm KSO15 couplings-cxc: 6 - 54mm compression. KSO01B repair couplings-cxc: 6 - 54mm compression. KSO01R reducing couplings cxc: 10 x 8mm compression, 12 x 8mm compression, 15 x 8mm compression, 12 x 10mm compression, 15 x 10mm compression, 15 x 12mm compression, 18 x 12mm compression, 16 x 15mm compression, 22 x 15mm compression, 28 x 15mm compression, 28 x 22mm compression, 35 x 28mm compression, 42 x 35mm compression, 54 x 42mm compression. KSO02P female adaptors-parallel: 6mm compression, x ¼" BSP (F), 6mm compression, x ⅜" BSP (F), 8mm compression, x ⅜" BSP (F), 8mm compression, x ¼" BSP (F), 10mm compression, x ¼" BSP (F), 10mm compression, x ⅜" BSP (F), 10mm compression, x ½" BSP (F), 12mm compression, x ¼" BSP (F), 12mm compression, x ⅜" BSP (F), 12mm compression, x ½" BSP (F), 15mm compression, x ¼" BSP (F), 15mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 18mm compression, x ½" BSP (F), 22mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F), 28mm compression, x 1" BSP (F), 28mm compression, x ¾” BSP (F), 35mm compression, x 1-¼" BSP (F), 42mm compression, x 1-½" BSP (F), 54mm compression, x 2" BSP (F). KSO03T male adaptors-CxMI taper: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 8mm compression, x ½" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). KSO03P male adaptors-CxMI parallel: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 8mm compression, x ½" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). KSO03P extended male adaptors-CxMI: 10mm compression, x ⅜" BSP (M), 12mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M). KSO04 tank connectors-lug style: 10 - 54mm compression. KSO04N tank connectors-nut style: 10 - 54mm compression. KSO05 elbows 90 degree-CxC: 6 - 54mm compression. 8 x 6mm compression, 10 x 8mm compression, 12 x 10mm compression, 15 x 12mm compression, 18 x 15mm compression, 22 x 15mm compression, 22 x 18mm compression, 28 x 22mm compression, 35 x 28mm compression, 42 x 35mm compression, 54 x 42mm compression, KSO06T male elbows-CxMI taper: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1¼" BSP (M), 42mm compression, x 1½" BSP (M), 54mm compression, x 2" BSP (M). KSO06 male elbows-CxMI parallel: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 28mm compression, x 1-¼" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). KSO07 female elbows-CxFI parallel: 6mm compression, x ¼" BSP (F), 6mm compression, x ⅜" BSP (F), 8mm compression, x ¼" BSP (F), 8mm compression, x ⅜" BSP (F), 10mm compression, x ¼" BSP (F), 10mm compression, x ½" BSP (F), 10mm compression, x ⅜" BSP (F), 12mm compression, x ¼" BSP (F), 12mm compression, x ⅜" BSP (F), 12mm compression, x ½" BSP (F), 15mm compression, x ¼" BSP (F), 15mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 18mm compression, x ½" BSP (F), 22mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F), 28mm compression, x ¾" BSP (F), 28mm compression, x 1" BSP (F), 28mm compression, x 1-¼" BSP (F), 35mm compression, x 1-¼" BSP (F), 42mm compression, x 1-½" BSP (F), 54mm compression, x 2" BSP (F). KSO08 wallplate elbows-CxFI: 12mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x ½" BSP (F), 28mm compression, x 1" BSP (F). KSO08 equal tees-CxCxC: 6 - 54mm compression. KSO08R reducing tees-CxCxC: 15 x 15 x 10mm compression, 15 x 15 x 22mm compression, 22 x 15 x 15mm compression, 22 x 15 x 22mm compression, 22 x 22 x 15mm compression, 22 x 22 x 28mm compression, 28 x 15 x 28mm compression, 28 x 22 x 28mm compression, 28 x 22 x 22mm compression, 28 x 28 x 15mm compression, 28 x 28 x 22mm compression, 35 x 35 x 15mm compression, 35 x 35 x 22mm compression, KSO09 threaded centre teesCxCxFI: 15mm compression, x 15mm compression, x ¼" BSP (F), 15mm compression, x 15mm compression, x ½" BSP (F), 22mm compression, x 22mm compression, x ½" BSP (F), 22mm compression, x 22mm compression, x ¾" BSP (F), 28mm compression, x 28mm compression, x ¾" BSP (F), 28mm compression, x 28mm compression, x 1" BSP (F). KSO10 threaded end tees CxFIxC: 15mm compression, x ½" BSP (F) x 15mm compression, 22mm compression, x ¾" BSP (F) x 22mm compression, KSO12 stopends-C: 6 - 54mm compression. AF14 straight tap connectors: 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F). KSO15 bent tap connectors: 15mm compression, x ½" BSP (F). KSO06P male elbows-CxMI parallel 6mmx1/4"-54mmx2" 6mm compression, x ¼ " BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼ " BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼ " BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½ " BSP (M), 12mm compression, x ¼ " BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½ " BSP (M), 15mm compression, x ¼ " BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½ " BSP (M), 15mm compression, x ¾ " BSP (M), 18mm compression, x ½ " BSP (M), 22mm compression, x ½ " BSP (M), 22mm compression, x ¾ " BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾ " BSP (M), 28mm compression, x 1" BSP (M), 28mm compression, x 1-¼ " BSP (M), 35mm compression, x 1-¼ " BSP (M), 42mm compression, x 1-½ " BSP (M), 54mm compression, x 2" BSP (M). KSO14 straight tap connectors 15mm x 1/2"-22mm x1" 15mm compression, x ½ " BSP (F), 15mm compression, x ¾ " BSP (F), 22mm compression, x ¾ " BSP (F), 22mm compression, x 1" BSP (F).

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company