Directory Search Results

Fittings Materials
Print List

#2009010

Range of thermostatic cartridges with plastic bodies, stainless steel strainers and EPDM ‘O’-rings. For insertion into specifically dimensioned tap bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C

Section:
0442 Thermostatic cartridges
Section Subtitle:
Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:
2009010
Size:
32mm Outside Diameter (TM001) 23mm Outside Diameter (TM006)
Marking:
Sedal or Sedal Logo & DoM (DD/MM/YY) on Body
Installation Requirements:
R001
Expiry date:
30/09/2025
Model:
TM001 & TM006
Product Images
Approval Holder:
Kaiping Sedal Tap Components Co., Ltd.
Company Name
Kaiping Sedal Tap Components Co., Ltd.
Address
Floor 1, 3 and Part of Floor 2, No. 2 Neihuan Dong Road, Shuikou Town, Kaiping City, Guangdong Province
Country
China
Phone
+86-750-2728599
General Email
tony@ksedal.com

View All Listings by this Company
Manufacturer:
Kaiping Sedal Tap Components Co., Ltd.
Company Name
Kaiping Sedal Tap Components Co., Ltd.
Address
Floor 1, 3 and Part of Floor 2, No. 2 Neihuan Dong Road, Shuikou Town, Kaiping City, Guangdong Province
Country
China
Phone
+86-750-2728599
General Email
tony@ksedal.com

View All Listings by this Company

Print This Approval

#2007314

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating member. The flexible spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2007314
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
Marking:
DTC25 on rear of body. DEVA on front of the body.
Installation Requirements:
R001 R090
Expiry date:
31/07/2025
Model:
BDG104 – Bridgewater Flexi sink mixer.
Product Images
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval

#2007024

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2007024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2025
Model:
193938
Product Images
Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval

#2007050

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes - see model), incorporating a ceramic cartridge headwork with either a single lever or dome type operating member. The spout outlet incorporates an aerator. The product can be supplied with a pop-up waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2007050
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
FANTINI on operating member or body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2025
Model:
Washbasin mixers Lamé: 24 XX M004F (standard body height - pop-up waste). 24 XX M004WF (standard body height - without waste). 24 XX M104F (standard body height - pop-up waste). 24 XX M104WF (standard body height - without waste). 24 XX M006WF (higher body version - without waste). 24 XX M106WF (higher body version - without waste). Washbasin mixers AL/23 Lissoni: 26 XX B004WF (standard version spout - without waste). 26 XX B003WF (longer version spout - without waste). 26 XX B006WF (higher body version - without waste). Washbasin mixers Nostromo: 50 XX E904F (standard version spout - pop-up waste). 50 XX E904WF (standard version spout - without waste). 50 XX E903F (longer version spout - pop-up waste). 50 XX E903WF (longer version spout - without waste). 50 XX E804F (standard version spout, lever handle - pop-up waste). 50 XX E804WF (standard version spout, lever handle - without waste). 50 XX E803F (longer version spout, lever handle - pop-up waste). 50 XX E803WF (longer version spout, lever handle - without waste). 50 XX E906WF (higher body version - without waste). 50 XX E806WF (higher body version, lever handle - without waste). Washbasin mixers Mint: 34 XX F004F (standard version spout - pop-up waste). 34 XX F004WF (standard version spout - without waste). 34 XX F003F (standard version spout - pop-up waste). 34 XX F003WF (longer version spout - without waste). 34 XX F006WF (higher body version - without waste). Where XX is replaced with the following to denote finish: 01 = Gold plus 02 = Chrome 13 = Matt Black 29 = Matt White 93 = Stainless steel 95 = Nickel PVD P5 = Matt Gun Metal PVD P6 = Matt British Gold PVD P9 = Matt Copper PVD
Product Images
Approval Holder:
Fratelli Fantini Spa
Company Name
Fratelli Fantini Spa
Address
Via Buonarroti 4 28010 Pella Italy

View All Listings by this Company
Manufacturer:
Fratelli Fantini Spa
Company Name
Fratelli Fantini Spa
Address
Via Buonarroti 4 28010 Pella Italy

View All Listings by this Company

Print This Approval

#2007306

Deck mounted drinking fountain tap having a stainless steel body with an integeral shroud over the outlet. Outlet incorporates a stainless steel cover and strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2007306
Size:
½” BSP (M)
Marking:
Bestware on body
Installation Requirements:
R001 R150
Expiry date:
31/07/2025
Model:
BUBMI
Product Images
Approval Holder:
Bestware Hardware Production Co. Ltd.
Company Name
Bestware Hardware Production Co. Ltd.

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 42 of 2242

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.