Water Regulations Approval Scheme Ltd

Miscellaneous Fittings

Section Code 1530 :

WRAS Approval Number: #260288002

Screw down, angled isolation valve with a dome type operating member, incorporating a DZR brass body. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M) x ⅜” BSP (M).
Marking:: FANSKI and DR on body.
Installation Requirements:: R001
Expiry date:: 28/02/2031
Model:: AP145

Approval Holder:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company
Manufacturer:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company

WRAS Approval Number: #251212023

Individual threaded fitting with SUS316L body. Maximum working pressure: 6 bar Maximum operating temperature 90°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (F).
Marking:: Solaire on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: MT-FT-1 Joint Pipe.

Approval Holder:: Solaire IOM Limited

Company Name
Solaire IOM Limited
Address
Ballacrammag 8 Westhill Village Ramsey Isle of Man
Postcode
IM8 3TD
Phone
07775 898965

View All Listings by this Company

WRAS Approval Number: #250702732

Water shock absorber incorporating a stainless-steel body and EPDM membrane. Maximum working pressure 15.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M).
Marking:: Aquasystem logo (brand of Zilio Industries SpA), model code, date of manufacture (DD/MM/YYYY), pressure and other technical information on adhesive label on body.
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: XVES050000 0.16L (pre-set 5.0 bar) & XVES050001 0.16L (pre-set 1.5 bar) Potable water shock arrestor.

Approval Holder:: Reliance Worldwide Corporation (UK) Ltd

Company Name
Reliance Worldwide Corporation (UK) Ltd
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company
Manufacturer:: Zilio Industries SPA

Company Name
Zilio Industries SPA
Address
Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
Country
Italy
Phone
[+39] 049 59 57 552
General Email
info@zilioindustries.com

View All Listings by this Company
Manufacturer:: Zilio Industries SPA

Company Name
Zilio Industries SPA
Address
Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
Country
Italy
Phone
[+39] 049 59 57 552
General Email
info@zilioindustries.com

View All Listings by this Company

WRAS Approval Number: #260102723

Range of pressure transmitters with stainless steel bodies. Maximum working pressure 100.0 Bar Maximum operating temperature 80.0°C (Type 540) or 100.0°C (Type 520 & Type 522)

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models
Marking:: Huba Control logo and technical info on body
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: Type 520: Dimension, Sealing type, Male/Female Thread 7/16"-20 UNF, sealing cone 45°, Female 7/16"-20 UNF, sealed at front ISO 11926-1 Male G1/4", sealed at front, Female 1/2"-14 NPT, thread sealing, Male 1/2"-14 NPT, thread sealing, Female 7/16"-20 UNF, sealing cone 45°, Male G1/8", sealed at front, Male G1/4", sealed at back without sealing groove, Male G1/4", sealed at back ISO 1179-2, Male G1/4", sealed at back + Manometer, Male G1/4", sealed at front, Female G1/4", sealed at front + Manometer, Male G1/4", sealed at back DIN 3852-2, Male R1/4", thread sealing EN 10226, Male G1/2", sealed at front, Male M20x1.5, sealed at front + Manometer, Male 7/16"-20 UNF, sealing cone with schrader, Female Type 522: Dimension, Sealing type, Male/Female Thread 7/16"-20 UNF, sealing cone 45°, Female 1/2"-14 NPT, thread sealing, Female 7/16"-20 UNF, sealing cone 45°, Male G1/4", sealed at back ISO 1179-2, Male G1/4", sealed at back + Manometer, Male G1/2", sealed at front, Male G1/2", sealed at front + Manometer, Male M20x1.5, sealed at front + Manometer, Male Type 540: Dimension, Sealing type, Male/Female Thread G1/4", sealed at front, Female 7/16"-20 UNF, sealing cone 45°, Male G1/4", sealed at back ISO 1179-2, Male R1/4", thread sealing EN 10226, Male Additional Information The pressure orifice and the connectors are all made from stainless steel X2CrNiMo17-12-2/1.4404 / AISI316L. The Schrader is made from Stainless X8CrNi18-9/1.4305/303 All variants can use the following pressure cell options, based on application requirements: -1…9 Bar / 0…2.5 - 100 bar (Stainless Steel Cell X6Cr17-1.4016) The only difference between the models 520, 522 & 540 is the input and output signal, and the approvals (not relevant to WRAS) All the different type variants can be given a unique customer article number, to trace the full specification: Example: 520.99XXX 520 = Model Type 99 = Client / project specific number XXX = Unique file for client containing all the above options specified within model.

Manufacturer:: Huba Control AG

Company Name
Huba Control AG
Address
Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

WRAS Approval Number: #260115704

Range of flanged ball type non-return valves with blue epoxy coated ductile iron bodies, EPDM lined ductile iron balls, and EPDM gaskets. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 260115704
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: This device does not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection.
Size:: DN80-DN500 flanged.
Marking:: KSB logo, KSB, model, DN, PN, material and production date (MM/YYYY) on data plate on body. DN, PN, KSB and flow arrow on body
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: ECOLINE RPL.

Approval Holder:: KSB Valves (Changzhou) Co., Ltd.

Company Name
KSB Valves (Changzhou) Co., Ltd.
Address
Environment Protection Industrial Park, Xinbei District, 68 Huanbao Four Road, 213022 Changzhou, Jiangsu Province
Country
China

View All Listings by this Company
Manufacturer:: KSB Valves (Changzhou) Co., Ltd.

Company Name
KSB Valves (Changzhou) Co., Ltd.
Address
No.68 Huanbao Four Road, Xinbei District, Changzhou, Jiangsu Province
Country
China

View All Listings by this Company