Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2101356

Range of water conditioners. The WFL38 model has a brass body, all other models are stainless steel. Operating parameters: GRANDER® Inline units - Maximum working pressure 10.0 bar. Maximum operating temperature 95°C. GRANDER® Flexible unit - Maximum working pressure 6.0 bar. Maximum operating temperature 75°C. GRANDER® Apartment unit & Immersion units - Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:: 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
WRAS Approval Number:: 2101356
Note:: The fittings listed on this approval have been judged only against the requirements of the Water Supply (Water Fittings) Regulations 1999. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed.
Size:: See Model
Marking:: GRANDER® Inline units: Grander, Grander logo, type, pressure and other technical information on adhesive label on body. Grander, Grander logo and email address on body. GRANDER® Flexible unit: Grander, Grander logo, pressure and other technical information on body. GRANDER® Apartment unit: Grander, Grander logo, type, pressure and other technical information on adhesive label on body. GRANDER® Immersion Units: Grander, Grander logo and email address on body.
Installation Requirements:: R001 R120 R150 R170 R290
Expiry date:: 31/01/2026
Model:: GRANDER® Inline units: Blue label (cold): W38 DN10 - ⅜” BSP (F). W50 DN15 - ½” BSP (F). W75 DN20 - ¾” BSP (F). W10 DN25 - 1” BSP (F). W54 DN32 - 1¼” BSP (F). W64 DN40 - 1½” BSP (F). W20 DN50 - 2” BSP (F). W25 DN65 - 2½” BSP (F). W30 DN80 - 3” flanged. W40 DN100 - 4” flanged. Red label (hot): K38 DN10 - ⅜” BSP (F). K50 DN15 - ½” BSP (F). K75 DN20 - ¾” BSP (F). K10 DN25 - 1” BSP (F). K54 DN32 - 1¼” BSP (F). K64 DN40 - 1½” BSP (F). K20 DN50 - 2” BSP (F). K25 DN65 - 2½” BSP (F). K30 DN80 - 3” flanged. K40 DN100 - 4” flanged. GRANDER® Flexible unit: WFL38 DN15-DN20 - ½” BSP (F) x ¾” BSP (F). GRANDER® Apartment unit: WOHN DN50 - 2” BSP (F). GRANDER® Immersion Units: WEZK Energy Rod Single Small WDZK Energy Rod Double Small WDZG Energy Rod Double Large KDZG Energy Rod Circulation Double Large KDZK Energy Rod Circulation Double Small

Product Images

Approval Holder:: IPF Implosions Photonenfeld Forschung GmbH.

Company Name
IPF Implosions Photonenfeld Forschung GmbH.
Address
Bergwerksweg 10, Jochberg, A-6373
Country
Austria

View All Listings by this Company
Manufacturer:: IPF Implosions Photonenfeld Forschung GmbH.

Company Name
IPF Implosions Photonenfeld Forschung GmbH.
Address
Bergwerksweg 10, Jochberg, A-6373
Country
Austria

View All Listings by this Company

WRAS Approval Number: #2103301

Range of ion generating water conditioners incorporating UPVC pipework and fittings, flow meter and stainless steel electrode pens contained within the electrode chamber. Maximum working pressure 9.0 bar. Cold water use only.

Section:: 2415 Water conditioners - Disinfectant ion generators
Size:: 50mm pipe connection
Marking:: ICA, Water ionisation treatment on control panel. ICA water ionisation treatment on filter. Ateca, model. KIWA and other technical information on mounting plate.
Installation Requirements:: R001 R120 R150 R170 R290
Expiry date:: 31/03/2026
Model:: ICA 100, 200, 300, 400, 500, 600

Product Images

Approval Holder:: Ateca Production BV

Company Name
Ateca Production BV
Address
Ruychrocklaan 121 2597 EL Den Haag
Country
Netherlands
Phone
+31 70 3628175
General Email
info@@ateca.nl

View All Listings by this Company
Manufacturer:: Ateca Production BV

Company Name
Ateca Production BV
Address
Ruychrocklaan 121 2597 EL Den Haag
Country
Netherlands
Phone
+31 70 3628175
General Email
info@@ateca.nl

View All Listings by this Company

WRAS Approval Number: #2104009

Range of ion exchange water softeners (salt regenerated) for domestic use. Maximum working pressure 6.0 bar. Cold water use only.

Section:: 2450 Water softeners
Size:: ¾” BSP (M) inlet/outlet or 1” BSP (M) inlet/outlet
Marking:: Canature, model and other product info on adhesive label on rear of body.
Installation Requirements:: R001 R150 R170 R290 R415
Expiry date:: 30/04/2026
Proviso:: Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.
Model:: Model CSAA-B-XXYY-Z AA denotes shape of softener external cabinet and can be replaced with ‘1H’ to ‘20H’ - From December 2024: AA can now be replaced with ‘1H’ to ‘32H’. B denotes shape of softener cover and can be replaced with ‘II’, ‘slide cover’ or ‘plus’. XX denotes diameter of resin tank between ‘08’ and ‘10’. YY denotes height of resin tank between ‘15’ and ‘35’. Z denotes control valve and is replaced with ‘BNT850SE’ or ‘null’ which represents ‘BNT850HE’ control valve. Model MN XXYY XX denotes diameter of resin tank and is replaced with ‘09’. YY denotes height of resin tank between ‘13’ and ‘35’. Duplex XXYY XX denotes diameter of resin tank and is replaced with ‘10’. YY denotes height of resin tank and is replaced with ‘17’ or ‘35’. Models added December 2024: Monarch Water LUXE, CN-07-05.

Product Images

Approval Holder:: Canature Health Technology Group Co., Ltd.

Company Name
Canature Health Technology Group Co., Ltd.
Address
No.508&518, Chuanda Road, Pudong New Area, Shanghai
Country
China

View All Listings by this Company

WRAS Approval Number: #2104062

Range of ion exchange water softeners (salt regenerated) for domestic use. Maximum working pressure 6.0 bar. Cold water use only.

Section:: 2450 Water softeners
Size:: ¾” BSP (M) inlet/outlet or 1” BSP (M) inlet/outlet
Marking:: MONARCH WATER ON FRONT OF BODY MONARCH WATER COMPANY INFORMATION, MODEL & PRODUCT INFORMATION ON ADHESIVE LABEL ON REAR OF BODY
Installation Requirements:: R001 R150 R170 R290 R415
Expiry date:: 30/04/2026
Proviso:: Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.
Model:: MONARCH RANGE EXCHANGE WATER SOFTENERS : Mini Aqua HE, CS100HE, PROSOFT100HE, EVER 9, Midi HE, CS150HE, PROSOFT150HE, EVER 12, Master HE, CS200HE, PROSOFT200HE, EVER 18, Matrix HE ,CS300HE, PROSOFT300HE, EVER 30, PS12 HE, PS15 HE, GS4000 HE, GS6000 HE, LPS HE, SOF3000HE & SOF6000HE

Product Images

Approval Holder:: Monarch Water Ltd

Company Name
Monarch Water Ltd
Address
Fair Green Diss Norfolk
Postcode
IP22 4DG
Country
United Kingdom
Phone
01986 784759
General Email
kdelaney@monarchwater.co.uk

View All Listings by this Company

WRAS Approval Number: #2103507

`Iupital FG2025MZ`. White coloured, injection moulded POM material. For use with water up to 85°C.

Section:: 5015 Acetal
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2103507
Expiry date:: 31/03/2026

Approval Holder:: Global Polyacetal Co., Ltd.

Company Name
Global Polyacetal Co., Ltd.
Address
Shiodome Sumitomo-Building 25F 1-9-2, Higashi-shinbashi, Minato Ward, Tokyo 105-0021
Country
Japan

View All Listings by this Company

WRAS Approval Number: #2103515

'CT Water - ABS'. Grey coloured, injection moulded ABS end cap. For use with water up to 80°C.

Section:: 5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)
Expiry date:: 31/03/2026

Approval Holder:: Al-Ghammas Factory for Advanced Electromechanical Industry Co (AEICO)

Company Name
Al-Ghammas Factory for Advanced Electromechanical Industry Co (AEICO)
Address
Qassim- 1st Industrial City
Country
Saudi Arabia

View All Listings by this Company

WRAS Approval Number: #2103531

'ABS-010' (grey coloured) & 'ABS-078' (white coloured). Injection moulded ABS materials. For use with water up to 85°C.

Section:: 5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)
Expiry date:: 31/03/2026

Approval Holder:: Fujian Xihe Sanitary Ware Technology Co., Ltd.

Company Name
Fujian Xihe Sanitary Ware Technology Co., Ltd.
Address
High-Tech Industrial Zone, Luncang Town, Nan'An City, Fujian 362304
Country
China
Phone
+86 0595-86186107

View All Listings by this Company

WRAS Approval Number: #2104524

'Challenger ABS Fittings'. Light grey coloured, injection moulded ABS fittings. For use with water up to 23°C.

Section:: 5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)
Expiry date:: 30/04/2026

Approval Holder:: Epco Limited

Company Name
Epco Limited
Address
Unit 6, Felnex Square, Cross Green Industrial Estate, Leeds
Postcode
LS9 0ST

View All Listings by this Company

WRAS Approval Number: #2110502

'Deep High Build Liquid Bitumen Paint'. Factory applied, black coloured bitumen paint. Apply and cure as per manufacturer's instructions reference 'DI/BP/2021/011' dated April 15, 2021. For use with water up to 60°C.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 2110502
Expiry date:: 31/10/2026

Approval Holder:: Deep Industries

Company Name
Deep Industries
Address
Plot Number 264, GIDC-II, Dediyasan, Mehsana - 384002, Gujurat
Country
India

View All Listings by this Company

WRAS Approval Number: #2104533

'P658RC & CY10C washers'. P658RC is a black coloured, polyester resin impregnated carbon washer. CY10C is a dark grey coloured, phenolic resin impregnated carbon washer. For use with water up to 85°C.

Section:: 5022 Carbon
Expiry date:: 30/04/2026

Approval Holder:: Morgan Advanced Materials

Company Name
Morgan Advanced Materials
Address
1 Rue des Trois Cantons, 8399 Windhof
Country
Luxembourg

View All Listings by this Company