Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250602714

Range of filter shower handsets and tap outlets with plastic bodies with EPDM O-Rings Open Outlet use. Maximum operating temperature 60°C

Section:: 1050 Filters and Housings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models below
Marking:: Aquatools logo, Model and other information on adhesive label on body
Installation Requirements:: R001 R150 R170
Expiry date:: 30/06/2030
Model:: 1/2" BSP (M) AT030711CP, AT030723CP, AT030713CP, AT030715CP, AT030714CP, AT030724CP, AT030725CP Ø10.9 AT030717CP, AT030727CP, AT030719CP, AT030721CP, AT030729CP, AT030747CP, AT030730CP, AT030718CP, AT030728CP, AT030720CP, AT030722CP, AT030739CP, AT030748CP, AT030740CP, AT030767CP, AT030768CP, AT030741CP, AT030742CP

Manufacturer:: AQUATOOLS HYGIENE LTD

Company Name
AQUATOOLS HYGIENE LTD
Address
1-3 Henderson house Hithercroft Road Wallingford Oxfordshire OX10 9DG

View All Listings by this Company

WRAS Approval Number: #250615009

‘GM50xx’ range of stainless steel (SS304 or SS316L) press-fit fittings incorporating EPDM ‘O’-rings for use with *- STPT304 and *- STPT316 stainless steel pipes. The GM5004 prefix models also incorporates an EPDM gasket on the union nut. Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250615009
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15 - 108mm. ½” - 3” BSP (M). ½” - 2” BSP (F).
Marking:: Kasinpress (brand of WENZHOU KASIN VALVE PIPE FITTING CO., LTD), size, WRAS and material grade on fitting body. WRAS, Kasinpress (brand of WENZHOU KASIN VALVE PIPE FITTING CO., LTD), size, material grade, EN10312 and date of manufacture (YYYY/MM) on pipe.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Adapter 90 with female thread: GM5016-1505: 15×Rp½. GM5016-1805: 18×Rp½. GM5016-22075: 22×Rp¾. Adapter with female thread: GM5002-1505: 15×Rp½. GM5002-1805: 18×Rp½. GM5002-22075: 22×Rp¾. GM5002-281: 28×Rp1. GM5002-351025: 35×Rp1¼. GM5002-42105: 42×Rp1½. GM5002-542: 54×Rp2. Bridge with plain ending: GM5035-18: 18. GM5035-22: 22. GM5035-28: 28. Cap: GM5024-15: 15. GM5024-18: 18. GM5024-22: 22. GM5024-28: 28. GM5024-35: 35. GM5024-42: 42. GM5024-54: 54. GM5024-76: 76.1. GM5024-89: 88.9. GM5024-108: 108. Elbow 45 with press ending: GM5008-15: 15. GM5008-18: 18. GM5008-22: 22. GM5008-28: 28. GM5008-35: 35. GM5008-42: 42. GM5008-54: 54. GM5008-76: 76.1. GM5008-89: 88.9. GM5008-108: 108. Elbow 45 with plain ending: GM5009-15: 15. GM5009-18: 18. GM5009-22: 22. GM5009-28: 28. GM5009-35: 35. GM5009-42: 42. GM5009-54: 54. GM5009-76: 76.1. GM5009-89: 88.9. GM5009-108: 108. Elbow 90 with press ending: GM5006-15: 15. GM5006-18: 18. GM5006-22: 22. GM5006-28: 28. GM5006-35: 35. GM5006-42: 42. GM5006-54: 54. GM5006-67: 66.7. GM5006-76: 76.1. GM5006-89: 88.9. GM5006-108 -108. Elbow 90 with female thread: GM5021-1505: 15×Rp½. GM5021-1805: 18×Rp½. GM5021-22075: 22×Rp¾. GM5021-281: 28×Rp1. GM5021-351024: 35×Rp1¼. GM5021-42105: 42×Rp1½. GM5021-542: 54×Rp2. Elbow: 90 with: male thread: GM5010-1505: 15×R½. GM5010-1805: 18×R½. GM5010-22075: 22×R¾ Elbow 90 with plain ending: GM5007-15: 15. GM5007-18: 18. GM5007-22: 22. GM5007-28: 28. GM5007-35: 35. GM5007-42: 42. GM5007-54: 54. GM5007-76: 76.1. GM5007-89: 88.9. GM5007-108: 108. Reducer coupling with plain ending: GM5005-1815: 18×15. GM5005-2218: 22×18. GM5005-2818: 28×18. GM5005-3522: 35×22. GM5005-3528: 35×28. GM5005-4222: 42×22. GM5005-4228: 42×28. GM5005-4235: 42×35. GM5005-5428: 54×28. GM5005-5435: 54×35. GM5005-5442: 54×42. Reducer coupling with press ending: GM5011-1815: 18×15. GM5011-2215: 22×15. GM5011-2218: 22×18. GM5011-2815: 28×15. GM5011-2818: 28×18. GM5011-2822: 28×22. GM5011-3515: 35×15. GM5011-3518: 35×18. GM5011-3522: 35×22. GM5011-3528: 35×28. GM5011-4215: 42×15. GM5011-4218: 42×18. GM5011-4222: 42×22. GM5011-4228: 42×28. GM5011-4235: 42×35. GM5011-5415: 54×15. GM5011-5418: 54×18. GM5011-5422: 54×22. GM5011-5428: 54×28. GM5011-5435: 54×35. GM5011-5442: 54×42. GM5011-6735: 66.7×35. GM5011-6754: 66.7×54. GM5011-7654: 76.1×54. GM5011-8954: 88.9×54. GM5011-8976: 88.9×76.1. GM5011-10854: 108×54. GM5011-10876: 108×76.1. GM5011-10889: 108×88.9. Reducer Tee with press ending: GM5015-1815: 18×15×18. GM5015-2215: 22×15×22. GM5015-2218: 22×18×22. GM5015-2815: 28×15×28. GM5015-2818: 28×18×28. GM5015-2822: 28×22×28. GM5015-3522: 35×22×35. GM5015-3528: 35×28×35. GM5015-4222: 42×22×42. GM5015-4228: 42×28×42. GM5015-4235: 42×35×42. GM5015-5422: 54×22×54. GM5015-5428: 54×28×54. GM5015-5435: 54×35×54. GM5015-5442: 54×42×54. GM5015-7642: 76.1×42×76.1. GM5015-7654: 76.1×54×76.1. GM5015-8954: 88.9×54×88.9 GM5015-10854: 108×54×108. GM5015-10876: 108×76.1×108. GM5015-10889: 108×88.9×108 Equal coupling with press ending: GM5001-15: 15. GM5001-18: 18. GM5001-22: 22 GM5001-28: 28. GM5001-35: 35. GM5001-42: 42. GM5001-54: 54. GM5001-67: 66.7. GM5001-76: 76.1. GM5001-89: 88.9. GM5001-108: 108 Adapter with male thread: GM5003-1505: 15×R½. GM5003-1805: 18×R½. GM5003-18075: 18×R¾. GM5003-2205: 22×R½. GM5003-22075: 22×R¾. GM5003-281: 28×R1. GM5003-351025: 35×R1¼. GM5003-42105: 42×R1½. GM5003-542: 54×R2. GM5003-76205: 76.1×R2½. GM5003-893: 88.9×R3. Slip coupling with press ending: GM5019-15: 15. GM5019-18: 18. GM5019-22: 22. GM5019-28: 28. GM5019-35: 35. GM5019-42: 42 GM5019-54: 54. Tee with press ending: GM5012-15: 15. GM5012-18: 18. GM5012-22: 22. GM5012-28: 28. GM5012-35: 35. GM5012-42: 42. GM5012-54: 54. GM5012-76: 76.1. GM5012-89: 88.9. GM5012-108: 108. Tee with male thread: GM5013-1505: 15×R½. GM5013-1805: 18×R½. GM5013-2205: 22×R½. GM5013-22075: 22×R¾. GM5013-2805: 28×R½. GM5013-28075: 28×R¾. GM5013-281: 28×R1. GM5013-3505: 35×R½. GM5013-351025: 35×R1¼. GM5013-421025: 42×R1¼. GM5013-54105: 54×R1½. GM5013-542: 54×R2. Tee with female thread:: GM5014-1505: 15×Rp½. GM5014-1805: 18×Rp½. GM5014-2205: 22×Rp½. GM5014-22075: 22×Rp¾. GM5014-2805: 28×R½. GM5014-28075: 28×Rp¾. GM5014-281: 28×Rp1. GM5014-3505: 35×Rp½. GM5014-351025: 35×Rp1¼. GM5014-421025: 42×Rp1¼. GM5014-54105: 54×1½. GM5014-542: 54×Rp2. Adaptor with union nut: GM5004-1505: 15×G½. GM5004-1805: 18×G½. GM5004-18075: 18×G¾. GM5004-2205: 22×G½. GM5004-22075: 22×G¾. GM5004-221: 22×G1. GM5004-281: 28×G1. GM5004-351025: 35×G1¼. GM5004-421075: 42×G1¾. GM5004-542: 54×G2. Stainless steel pipe (SS304 or SS316L): *- STPT304 (SS304). *- STPT316L (SS316L). Where * = size in mm between 15 and 108 (in whole numbers: 15, 18, 22, 28, 35, 42, 54, 66.7, 76.1, 88.9, 108).

Product Images

Approval Holder:: WENZHOU KASIN VALVE PIPE FITTING CO., LTD

Company Name
WENZHOU KASIN VALVE PIPE FITTING CO., LTD
Address
NO.2‐1802 Caizhi Building, No. 88, Binhang Road, Yongzhong Sub‐District, Longwan District, Wenzhou, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #250604019

Range of stainless-steel press fittings with EPDM ‘O’-rings for use with stainless-steel pipe to EN10312. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250604019
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: GD Press, size, 304L, model number on body.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Coupling GDC5001 OD15 GDC5002 OD18 GDC5003 OD22 GDC5004 OD28 GDC5005 OD35 GDC5006 OD42 GDC5007 OD54 GDC6501 OD66.7 GDC5008 OD76.1 GDC5009 OD88.9 GDC5010 OD108 Long Coupling GDC5011 OD15 GDC5012 OD18 GDC5013 OD22 GDC5014 OD28 GDC5015 OD35 GDC5016 OD42 GDC5017 OD54 GDC6502 OD66.7 GDC5018 OD76.1 GDC5019 OD88.9 GDC5020 OD108 Reducer with Plain End GDC5021 OD18×OD15 GDC5022 OD22×OD15 GDC5023 OD22×OD18 GDC5024 OD28×OD15 GDC5025 OD28×OD18 GDC5026 OD28×OD22 GDC5048 OD35×OD15 GDC5027 OD35×OD18 GDC5029 OD35×OD22 GDC5030 OD35×OD28 GDC5031 OD42×OD15 GDC5032 OD42×OD18 GDC5033 OD42×OD22 GDC5034 OD42×OD28 GDC5035 OD42×OD35 GDC5036 OD54×OD15 GDC5037 OD54×OD18 GDC5038 OD54×OD22 GDC5039 OD54×OD28 GDC5040 OD54×OD35 GDC5041 OD54×OD42 GDC6503 OD66.7×OD42 GDC6504 OD66.7×OD54 GDC5028 OD76.1×OD42 GDC5042 OD76.1×OD54 GDC6505 OD76.1×OD66.7 GDC5049 OD88.9×OD42 GDC5043 OD88.9×OD54 GDC6506 OD88.9×OD66.7 GDC5044 OD88.9×OD76.1 GDC5045 OD108×OD54 GDC6507 OD108×OD66.7 GDC5046 OD108×OD76.1 GDC5047 OD108×OD88.9 90° Elbow GDC6051 OD15 GDC6052 OD18 GDC6053 OD22 GDC6054 OD28 GDC6055 OD35 GDC6056 OD42 GDC6057 OD54 GDC6511 OD66.7 GDC6058 OD76.1 GDC6059 OD88.9 GDC6060 OD108 90° Elbow with Plain End GDC6071 OD15 GDC6072 OD18 GDC6073 OD22 GDC6074 OD28 GDC6075 OD35 GDC6076 OD42 GDC6077 OD54 GDC6512 OD66.7 GDC6078 OD76.1 GDC6079 OD88.9 GDC6080 OD108 45° Elbow GDC6101 OD15 GDC6102 OD18 GDC6103 OD22 GDC6104 OD28 GDC6105 OD35 GDC6106 OD42 GDC6107 OD54 GDC6513 OD66.7 GDC6108 OD76.1 GDC6109 OD88.9 GDC6110 OD108 45° Elbow with Plain End GDC6121 OD15 GDC6122 OD18 GDC6123 OD22 GDC6124 OD28 GDC6125 OD35 GDC6126 OD42 GDC6127 OD54 GDC6514 OD66.7 GDC6128 OD76.1 GDC6129 OD88.9 GDC6130 OD108 Tee GDC5181 OD15 GDC5182 OD18 GDC5183 OD22 GDC5184 OD28 GDC5185 OD35 GDC5186 OD42 GDC5187 OD54 GDC6515 OD66.7 GDC5188 OD76.1 GDC5189 OD88.9 GDC5190 OD108 Reducing Tee GDC5191 OD18×OD15 GDC5192 OD22×OD15 GDC5193 OD22×OD18 GDC5194 OD28×OD15 GDC5195 OD28×OD18 GDC5196 OD28×OD22 GDC5197 OD35×OD15 GDC5198 OD35×OD18 GDC5199 OD35×OD22 GDC5200 OD35×OD28 GDC5201 OD42×OD15 GDC5202 OD42×OD18 GDC5203 OD42×OD22 GDC5204 OD42×OD28 GDC5205 OD42×OD35 GDC5206 OD54×OD15 GDC5207 OD54×OD18 GDC5208 OD54×OD22 GDC5209 OD54×OD28 GDC5210 OD54×OD35 GDC5211 OD54×OD42 GDC6517 OD66.7×OD22 GDC6518 OD66.7×OD28 GDC6519 OD66.7×OD35 GDC6520 OD66.7×OD42 GDC6521 OD66.7×OD54 GDC5212 OD76.1×OD22 GDC5213 OD76.1×OD28 GDC5214 OD76.1×OD35 GDC5215 OD76.1×OD42 GDC5216 OD76.1×OD54 GDC6522 OD76.1×OD66.7 GDC5217 OD88.9×OD22 GDC5218 OD88.9×OD28 GDC5219 OD88.9×OD35 GDC5220 OD88.9×OD42 GDC5221 OD88.9×OD54 GDC6523 OD88.9×OD66.7 GDC5222 OD88.9×OD76.1 GDC5223 OD108×OD22 GDC5224 OD108×OD28 GDC5225 OD108×OD35 GDC5226 OD108×OD42 GDC5227 OD108×OD54 GDC6524 OD108×OD66.7 GDC5228 OD108×OD76.1 GDC5229 OD108×OD88.9 Tee with Male Thread End GDC5231 OD15×R1/2 GDC5232 OD18×R1/2 GDC5239 OD22×R1/2 GDC5233 OD22×R3/4 GDC5234 OD22×R1 GDC5240 OD28×R1/2 GDC5283 OD28×R3/4 GDC5235 OD28×R1 GDC5281 OD35×Rp3/4 GDC5236 OD35×Rp1 1/4 GDC5237 OD42×Rp1 1/2 GDC5282 OD54×Rp1/2 GDC5238 OD54×Rp2 Tee with Female Thread End GDC5241 OD15×Rp1/2 GDC5242 OD18×Rp1/2 GDC5243 OD18×Rp3/4 GDC5244 OD22×Rp1/2 GDC5245 OD22×Rp3/4 GDC5246 OD28×Rp1/2 GDC5247 OD28×Rp3/4 GDC5248 OD28×Rp1 GDC5249 OD35×Rp1/2 GDC5250 OD35×Rp3/4 GDC5262 OD35×Rp1 GDC5263 OD35×Rp1 1/4 GDC5251 OD42×Rp1/2 GDC5252 OD42×Rp3/4 GDC5264 OD42×Rp1 GDC5265 OD42×Rp1 1/2 GDC5253 OD54×Rp1/2 GDC5254 OD54×Rp3/4 GDC5266 OD54×Rp1 GDC5255 OD54×Rp2 GDC6531 OD66.7×Rp1/2 GDC6532 OD66.7×Rp3/4 GDC6533 OD66.7×Rp1 1/2 GDC5256 OD76.1×Rp3/4 GDC5257 OD76.1×Rp2 GDC5258 OD88.9×Rp3/4 GDC5259 OD88.9×Rp2 GDC5260 OD108×Rp3/4 GDC5261 OD108×Rp2 Adaptor with Male Thread End GDC5360 OD15×R3/8 GDC5361 OD15×R1/2 GDC5362 OD15×R3/4 GDC5363 OD18×R1/2 GDC5364 OD18×R3/4 GDC5365 OD22×R1/2 GDC5366 OD22×R3/4 GDC5367 OD22×R1 GDC5368 OD28×R3/4 GDC5369 OD28×R1 GDC5370 OD28×R1 1/4 GDC5371 OD35×R1 GDC5372 OD35×R1 1/4 GDC5373 OD35×R1 1/2 GDC5374 OD42×R1 1/4 GDC5375 OD42×R1 1/2 GDC5376 OD54×R1 1/2 GDC5377 OD54×R2 GDC6541 OD66.7×R2 1/2 GDC5378 OD76.1×R2 1/2 GDC5379 OD88.9×R3 GDC5380 OD108×R4 Adaptor with Female Thread End GDC5381 OD15×Rp1/2 GDC5382 OD15×Rp3/4 GDC5383 OD18×Rp1/2 GDC5384 OD18×Rp3/4 GDC5385 OD22×Rp1/2 GDC5386 OD22×Rp3/4 GDC5387 OD22×Rp1 GDC5388 OD28×Rp3/4 GDC5389 OD28×Rp1 GDC5390 OD28×Rp1 1/4 GDC5391 OD35×Rp1 GDC5392 OD35×Rp1 1/4 GDC5393 OD35×Rp1 1/2 GDC5394 OD42×Rp1 1/4 GDC5395 OD42×Rp1 1/2 GDC5396 OD54×Rp1 1/2 GDC5397 OD54×Rp2 GDC6542 OD66.7×Rp2 1/2 GDC5398 OD76.1×Rp2 1/2 GDC5399 OD88.9×Rp3 GDC5400 OD108×Rp4 Cap GDC5421 OD15 GDC5422 OD18 GDC5423 OD22 GDC5424 OD28 GDC5425 OD35 GDC5426 OD42 GDC5427 OD54 GDC6542 OD66.7 GDC5428 OD76.1 GDC5429 OD88.9 GDC5430 OD108 Adaptor with Union Nut GDC5341 OD15×G1/2 GDC5353 OD15×G3/4 GDC5342 OD18×G1/2 GDC5343 OD18×G3/4 GDC5345 OD22×G1 GDC5347 OD28×G1 GDC5348 OD28×G1 1/4 GDC5359 OD35×G1 1/4 GDC5350 OD35×G1 1/2 GDC5351 OD42×G1 3/4 GDC5346 OD42×G1 1/2 GDC5356 OD54×G2 GDC5352 OD54×G2 3/8 Adaptor with Union with Female thread GDC5451 OD15×Rp1/2 GDC5452 OD15×Rp3/4 GDC5453 OD18×Rp1/2 GDC5454 OD18×Rp3/4 GDC5455 OD22×Rp3/4 GDC5456 OD22×Rp1 GDC5457 OD28×Rp1 GDC5458 OD35×Rp1 1/4 GDC5459 OD42×Rp1 1/2 GDC5460 OD54×Rp2 Adaptor Union with Male Thread GDC5431 OD15×R1/2 GDC5432 OD15×R3/4 GDC5433 OD18×R1/2 GDC5434 OD18×R3/4 GDC5435 OD22×R1/2 GDC5436 OD22×R3/4 GDC5437 OD22×R1 GDC5438 OD28×R1 GDC5439 OD35×R1 1/4 GDC5440 OD42×R1 1/2 GDC5441 OD54×R2 Adaptor Union GDC5471 OD15 GDC5472 OD18 GDC5473 OD22 GDC5474 OD28 GDC5475 OD35 GDC5476 OD42 GDC5477 OD54 Flange with Pressing Socket GDC5301 OD15 GDC5302 OD18 GDC5303 OD22 GDC5304 OD28 GDC5305 OD35 GDC5306 OD42 GDC5307 OD54 GDC6536 OD66.7 GDC5308 OD76.1 GDC5309 OD88.9 GDC5310 OD108

Approval Holder:: Grande-tek Flow Control Co., Ltd

Company Name
Grande-tek Flow Control Co., Ltd
Address
Industrial Zone of Yunhe District, Fuyang Road, Cangzhou, Hebei
Postcode
061000
Country
China

View All Listings by this Company

WRAS Approval Number: #250604025

‘Uponor Q&E’ range of brass press-fit fittings for use with PE-Xa-PE-PE ‘Uponor Aqua Pipe AU’ multi-layered pipes. Maximum operating pressure 10 bar. Maximum operating temperature 70°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250604025
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 16mm – 25mm, ½” – 1”.
Marking:: Pipe - Uponor, size, PN, temperature, SDR & PE-Xa. Fittings - Uponor logo, size and other technical information.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Uponor Aqua Pipe AU 3-layer pipes: 1126786 - Uponor Aqua Pipe AU 16x2,2 100 mt, 1126787 - Uponor Aqua Pipe AU 20x2,8 100 mt, 1126788 - Uponor Aqua Pipe AU 25x3,5 50mt. Brass fittings: Uponor Q&E Coupling LL: 1126789 - 16x16, 1126790 - 20x20, 1126791 - 25x25. Uponor Q&E Reducer LL: 1126792 - 20x16, 1126793 - 25x16, 1126794 - 25x20. Uponor Q&E Elbow LL: 1126795 - 16x16, 1126796 - 20x20, 1126797 - 25x25. Uponor Q&E Tee LL: 1126798 - 16x16x16, 1126799 - 20x20x20, 1126800 - 25x25x25. Uponor Q&E Tee Reducer LL: 1126801 - 16x20x16, 1126802 - 20x16x16, 1126803 - 20x16x20, 1126804 - 20x20x16, 1126805 - 25x16x25, 1126806 - 25x20x25. Uponor Q&E Plug LL: 1126807 - 16, 1126808 - 20. Uponor Q&E Adapter Female LL: 1126809 - 16-Rp1/2", 1126810 - 20-Rp1/2", 1126811 - 20-Rp3/4", 1126812 - 20-Rp1", 1126813 - 25-Rp1". Uponor Q&E Adapter Male LL: 1126814 - 16-R1/2", 1126815 - 16-R3/4", 1126816 - 20-R1/2", 1126817 - 20-R3/4", 1126818 - 20-R1", 1126819 - 25-R3/4", 1126820 - 25-R1". Uponor Q&E Adapter Swivel Nut: 1126821 - 16-1/2", 1126822 - 20-1/2", 1126823 - 20-3/4", 1126824 - 25-3/4", 1126825 - 25-1". Uponor Q&E Elbow Swivel Nut: 1126826 - 16-1/2", 1126827 - 20-1/2". Uponor Q&E Tap Elbow LL: 1126828 - 16-1/2", 1126829 - 20-1/2", 1126830 - 20-3/4". Uponor Q&E Elbow Adapter Male LL: 1126831 - 16-G1/2", 1126832 - 20-G1/2", 1126833 - 20-R1/2", 1126834 - 20-G3/4", 1126871 - 25-G3/4". Uponor Q&E Elbow Adapter Female LL: 1126835 - 16-1/2", 1126836 - 20-3/4", 1126837 - 25-3/4". Uponor Q&E Tee female LL: 1126838 - 25-1/2"-25, 1126839 - 25-3/4"-25. Uponor Q&E BP-Elbow LL: 1126841 - 16-1/2" MT L = 65 MM, 1126842 - 16-1/2" MT L = 90 MM, 1126843 - 16-1/2" MT L = 175 MM, 1126844 - 16-1/2" MT L = 200 MM, 1126845 - 20-1/2"MT L = 95 MM, 1126846 - 20-1/2"MT L = 200 MM, 1126847 - 20-3/4" MT L = 100 MM. Uponor Q&E Brass Adapter LL: 1126848 - 16-15 CU, 1126849 - 20-15 CU, 1126850 - 20-3/4" CU, 1126851 - 25-1" CU. Uponor Q&E Brass Adapter LL PRESS: 1126852 - 16-1/2" CU, 1126853 - 20-3/4" CU, 1126854 - 25-1" CU. Uponor Q&E adapter male thread PL: 1023003 - 16-R1/2"MT, 1023005 - 20-R1/2"MT, 1023007 - 25-R3/4"MT. Uponor Smart Aqua tap elbow term. box Q&E UP PL: 1047935 - 16-Rp1/2"FT. Uponor Smart Aqua tap elbow term. box Q&E SP PL: 1047932 - 20-Rp1/2"FT, 1047933 - 25-Rp3/4"FT.

Approval Holder:: Uponor GmbH

Company Name
Uponor GmbH
Address
Industriestrasse 56, Hassfurt
Postcode
97437,
Country
Germany
Phone
0034916853600
General Email
mariaisabel.fernandez@uponor.com

View All Listings by this Company

WRAS Approval Number: #240404075

Range of press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240404075
Size:: For size see models
Marking:: Valtren logo 'indi', size, WRAS and date of manufacture (mm/yy) on body
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: STRAIGHT COUPLING CxC: 60111515 60112222 60112828 60113535 60114242 60115454 SLIP COUPLING C x C: 60171515 60172222 60172828 60173535 60174242 60175454 REDUCING COUPLING C x C: 60112215 60112815 60112822 60113515 60113522 60113528 60114215 60114222 60114228 60114235 60115415 60115422 60115428 60115435 60115442 FITTING REDUCER F x C: 60132215 60132815 60132822 60133515 60133522 60133528 60134215 60134222 60134228 60134235 60135415 60135422 60135428 60135435 60135442 90DEG ELBOW C x C: 60411515 60412222 60412828 60413535 60414242 60415454 90DEG STREET ELBOW F x C: 60431515 60432222 60432828 60433535 60434242 60435454 45DEG ELBOW C x C: 60451515 60452222 60452828 60453535 60454242 60455454 45DEG STREET ELBOW F x C: 60481515 60482222 60482828 60483535 60484242 60485454 CAP C x C: 60811515 60812222 60812828 60813535 60814242 60815454 EQUAL TEE C x C: 60151515 60222222 60282828 60353535 60424242 60545454 PART CROSSOVER F x C: 60271515 - 15mm 60272222 - 22mm CROSSOVER C x C: 60291515 - 15mm 60292222 - 22mm REDUCER ELBOW 60412215 - 22mm x 15mm REDUCING TEE: 60221515 60221522 60282222 60282228 60222215 60282815 60282822 60353515 60353522 60353528 60424215 60424222 60424228 60424235 60545415 60545422 60545428 60545435 60545442

Approval Holder:: Valtren Distribution Ltd

Company Name
Valtren Distribution Ltd
Address
10 Aylesbury Court Lapworth
Postcode
B94 6BE
Country
United Kingdom
General Email
07771 755057

View All Listings by this Company

WRAS Approval Number: #2304382

Range of Hyddro press fittings incorporating EPDM ‘O’-rings. For use with Hyddro (S-1-0509/10/11/12/17/13) PEX-AL-PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2304382
Size:: 16-32mm. BSP threaded connections: ½” - 1½” (M) or (F).
Marking:: Hyddro by GFS and WRAS on fitting. Hyddro by GFS, WRAS, size and product info on pipe.
Installation Requirements:: R001
Expiry date:: 30/04/2028
Model:: Straight: HYD-ST-0101 U (S1216) - 16mm HYD-ST-0102 U (S1418) - 18mm HYD-ST-0103 U (S1620) - 20mm HYD-ST-0104 U (S2025) - 25mm HYD-ST-0109 U (S2026) - 26mm HYD-ST-0105 U (S2632) - 32mm Reduced straight: HYD-RS-0202U (S20*16) 20x16mm HYD-RS-0203 U (S20*18) 20x18mm HYD-RS-0204 U (S25*16) 25x16mm HYD-RS-0205 U (S25*18) 25x18mm HYD-RS-0206 U (S25*20) 25x20mm HYD-RS-0223 U (S26*16) 26x16mm HYD-RS-0224 U (S26*18) 26x18mm HYD-RS-0225 U (S26*20) 26x20mm HYD-RS-0222 U (S32*16) 32x16mm HYD-RS-0226 U (S32*18) 32x18mm HYD-RS-0207 U (S32*20) 32x20mm HYD-RS-0208 U (S32*25) 32x25mm HYD-RS-0227 U (S32*26) 32x26mm. Male straight: HYD-MS-0301 U (S16*1/2"M) 16mmx1/2"Mr HYD-MS-0302 U (S16*3/4"M) 16mmx3/4"Mr HYD-MS-0303 U (S18*1/2"M) 18mmx1/2"Mr HYD-MS-0304 U (S18*3/4"M) 18mmx3/4"Mr HYD-MS-0305 U (S20*1/2"M) 20mmx1/2"Mr HYD-MS-0306 U (S20*3/4"M) 20mmx3/4"Mr HYD-MS-0307 U (S20*1"M) 20mmx1"M HYD-MS-0308 U (S25*1/2"M) 25mmx1/2"Mr HYD-MS-0309 U (S25*3/4"M) 25mmx3/4"Mr HYD-MS-0310 U (S25*1"M) 25mmx1"M HYD-MS-0326 U (S26*1/2"M) 26mmx1/2"Mr HYD-MS-0327 U (S26*3/4"M) 26mmx3/4"Mr HYD-MS-0328 U (S26*1"M) 26mmx1"M HYD-MS-0311 U (S32*1/2"M) 32mmx1/2"M HYD-MS-0312 U (S32*3/4"M) 32mmx3/4"M HYD-MS-0313 U (S32*1"M) 32mmx1"M HYD-MS-0314 U (S32*11/4"M) 32mmx11/4"M HYD-MS-0315 U (S32*11/2"M) 32mmx11/2"M Female straight: HYD-FS-0401 U (S16*1/2"F) 16mmx1/2"F HYD-FS-0402 U (S16*3/4"F) 16mmx3/4"F HYD-FS-0403 U (S16*1"F) 16mmx1"F HYD-FS-0404 U (S18*1/2"F) 18mmx1/2"F HYD-FS-0405 U (S18*3/4"F) 18mmx3/4"F HYD-FS-0407 U (S20*1/2"F) 20mmx1/2"F HYD-FS-0408 U (S20*3/4"F) 20mmx3/4"F HYD-FS-0409 U (S20*1"F) 20mmx1"F HYD-FS-0410 U (S25*1/2"F) 25mmx1/2"F HYD-FS-0411 U (S25*3/4"F) 25mmx3/4"F HYD-FS-0412 U (S25*1"F) 25mmx1"F HYD-FS-0422 U (S26*1/2"F) 26mmx1/2"F HYD-FS-0423 U (S26*3/4"F) 26mmx3/4"F HYD-FS-0424 U (S26*1"F) 26mmx1"F HYD-FS-0413 U (S32*1/2"F) 32mmx1/2"F HYD-FS-0414 U (S32*3/4"F) 32mmx3/4"F HYD-FS-0415 U (S32*1"F) 32mmx1"F HYD-FS-0416 U (S32*11/4"F) 32mmx11/4"F HYD-FS-0417 U (S32*11/2"F) 32mmx11/2"F. Elbow: HYD-EL-0501 U (L1216) 16mm HYD-EL-0502 U (L1418) 18mm HYD-EL-0503 U (L1620) 20mm HYD-EL-0504 U (L2025) 25mm HYD-EL-0509 U (L2026) 26mm HYD-EL-0505 U (L2632) 32mm. Male elbow: HYD-ME-0801 U (L16*1/2"M) 16mmx1/2"M HYD-ME-0802 U (L16*3/4"M) 16mmx3/4"M HYD-ME-0803 U (L18*1/2"M) 18mmx1/2"M HYD-ME-0804 U (L18*3/4"M) 18mmx3/4"M HYD-ME-0805 U (L20*1/2"M) 20mmx1/2"M HYD-ME-0806 U (L20*3/4"M) 20mmx3/4"M HYD-ME-0813 U (L20*1"M) 20mmx1"M HYD-ME-0807 U (L25*1/2"M) 25mmx1/2"M HYD-ME-0808 U (L25*3/4"M) 25mmx3/4"M HYD-ME-0809 U (L25*1"M) 25mmx1"M HYD-ME-0815 U (L26*1/2"M) 26mmx1/2"M HYD-ME-0816 U (L26*3/4"M) 26mmx3/4"M HYD-ME-0817 U (L26*1"M) 26mmx1"M HYD-ME-0810 U (L32*1/2"M) 32mmx1/2"M HYD-ME-0811 U (L32*3/4"M) 32mmx3/4"M HYD-ME-0812 U (L32*1"M) 32mmx1"M HYD-ME-0814 U (L32*1 1/4"M) 32mmx11/4"M Female elbow: HYD-FE-0901 U (L16*1/2"F) 16mmx1/2"F HYD-FE-0902 U (L16*3/4"F) 16mmx3/4"F HYD-FE-0903 U (L18*1/2"F) 18mmx1/2"F HYD-FE-0904 U (L18*3/4"F) 18mmx3/4"F HYD-FE-0905 U (L20*1/2"F) 20mmx1/2"F HYD-FE-0906 U (L20*3/4"F) 20mmx3/4"F HYD-FE-0913 U (L20*1"F) 20mmx1"F HYD-FE-0907 U (L25*1/2"F) 25mmx1/2"F HYD-FE-0908 U (L25*3/4"F) 25mmx3/4"F HYD-FE-0909 U (L25*1"F) 25mmx1"F HYD-FE-0914 U (L26*1/2"F) 26mmx1/2"F HYD-FE-0915 U (L26*3/4"F) 26mmx3/4"F HYD-FE-0916 U (L26*1"F) 26mmx1"F HYD-FE-0910 U (L32*1/2"F) 32mmx1/2"F HYD-FE-0911 U (L32*3/4"F) 32mmx3/4"F HYD-FE-0912 U (L32*1"F) 32mmx1"F HYD-FE-0917 U (L32*1 1/4"F) 32mmx11/4"F Wall plated elbow: HYD-WE-1001 U (L16*1/2"F(A)) 16mmx1/2"F HYD-WE-1002 U (L16*3/4"F(A)) 16mmx3/4"F HYD-WE-1003 U (L18*1/2"F(A)) 18mmx1/2"F HYD-WE-1004 U (L20*1/2"F(A)) 20mmx1/2"F HYD-WE-1006 U (L20*3/4"F(A)) 20mmx3/4"F. Tee: HYD-TE-1101 U (T1216) 16mm HYD-TE-1102 U (T1418) 18mm HYD-TE-1103 U (T1620) 20mm HYD-TE-1104 U (T2025) 25mm HYD-TE-1109 U (T2026) 26mm HYD-TE-1105 U (T2632) 32mm. Reduced tee: HYD-RT-1202 U (T16*20*16) 16x20x16mm HYD-RT-1203 U (T16*25*16) 16x25x16 mm HYD-RT-1255 U (T16*26*16) 16x26x16mm HYD-RT-1204 U (T18*16*18) 18x16x18mm HYD-RT-1205 U (T18*20*18) 18x20x18mm HYD-RT-1206 U (T18*25*18) 18x25x18mm HYD-RT-1256 U (T18*26*18) 18x26x18mm HYD-RT-1207 U (T20*16*20) 20x16x20mm HYD-RT-1208 U (T20*18*20) 20x18x20mm HYD-RT-1209 U (T20*25*20) 20x25x20mm HYD-RT-1211 U (T25*16*25) 25x16x25mm HYD-RT-1259 U (T25*16*16) 25x16x16mm HYD-RT-1260 U (T26*16*16) 26x16x16mm HYD-RT-1212 U (T25*18*25) 25x18x25mm HYD-RT-1213 U (T25*20*25) 25x20x25mm HYD-RT-1214 U (T25*32*25) 25x32x25mm HYD-RT-1240 U (T20*26*20) 20x26x20mm HYD-RT-1241 U (T26*16*26) 26x16x26mm HYD-RT-1242 U (T26*18*26) 26x18x26mm HYD-RT-1243 U (T26*20*26) 26x20x26mm HYD-RT-1244 U (T26*32*26) 26x32x26mm HYD-RT-1215 U (T32*16*32) 32x16x32mm HYD-RT-1216 U (T32*18*32) 32x18x32mm HYD-RT-1217 U (T32*20*32) 32x20x32mm HYD-RT-1263 U (T32*25*32) 32x25x32mm HYD-RT-1225 U (T25*16*20) 25x16x20mm HYD-RT-1226 U (T32*20*25) 32x20x25mm HYD-RT-1246 U (T26*16*20) 26x16x20mm HYD-RT-1247 U (T32*20*25) 32x20x26mm HYD-RT-1218 U (T20*16*16) 20x16x16mm HYD-RT-1219 U (T20*20*16) 20x20x16mm HYD-RT-1220 U (T25*25*18) 25x25x18mm HYD-RT-1221 U (T25*25*20) 25x25x20mm HYD-RT-1222 U (T25*18*18) 25x18x18mm HYD-RT-1223 U (T25*20*20) 25x20x20mm HYD-RT-1224 U (T25*16*20) 25x16x20mm HYD-RT-1227 U (T32*20*25) 32x20x25mm HYD-RT-1261 U (T26*26*16) 26x26x16mm HYD-RT-1248 U (T26*26*18) 26x26x18mm HYD-RT-1249 U (T26*26*20) 26x26x20mm HYD-RT-1250 U (T26*18*18) 26x18x18mm HYD-RT-1251 U (T26*20*20) 26x20x20mm HYD-RT-1252 U (T26*20*16) 26x20x16mm HYD-RT-1253 U (T32*20*26) 32x20x26mm HYD-RT-1254 U (T32*32*16) 32x32x16mm HYD-RT-1264 U (T32*32*20) 32x32x20mm HYD-RT-1257 U (T32*32*26) 32x32x26mm HYD-RT-1262 U (T32*25*25) 32x25x25mm HYD-RT-1258 U (T32*26*26) 32x26x26mm HYD-RT-1245 U (T32*26*32) 32x26x32mm. Male tee: HYD-MT-2801 U (T16*1/2"M*16) 16mmx1/2"Mx16mm HYD-MT-2802 U (T16*3/4"M*16) 16mmx3/4"Mx16mm HYD-MT-2803 U (T20*1/2"M*20) 20mmx1/2"Mx20mm HYD-MT-2804 U (T20*3/4"M*20) 20mmx3/4"Mx20mm. Female tee: HYD-FT-1301 U (T16*1/2"F*16) 16mmx1/2"Fx16mm HYD-FT-1302 U (T16*3/4"F*16) 16mmx3/4"Fx16mm HYD-FT-1303 U (T18*1/2"F*18) 18mmx1/2"Fx18mm HYD-FT-1304 U (T18*3/4"F*18) 18mmx3/4"Fx18mm HYD-FT-1305 U (T20*1/2"F*20) 20mmx1/2"Fx20mm HYD-FT-1306 U (T20*3/4"F*20) 20mmx3/4"Fx20mm HYD-FT-1307 U (T20*1"F*20) 20mmx1"Fx20mm HYD-FT-1308 U (T25*1/2"F*25) 25mmx1/2"Fx25mm HYD-FT-1309 U (T25*3/4"F*25) 25mmx3/4"Fx25mm HYD-FT-1310 U (T25*1"F*25) 25mmx1"Fx25mm HYD-FT-1329 U (T26*1/2"F*26) 26mmx1/2"Fx26mm HYD-FT-1330 U (T26*3/4"F*26) 26mmx3/4"Fx26mm HYD-FT-1331 U (T26*1"F*26) 26mmx1"Fx26mm HYD-FT-1311 U (T32*1/2"F*32) 32mmx1/2"Fx32mm HYD-FT-1312 U (T32*3/4"F*32) 32mmx3/4"Fx32mm HYD-FT-1313 U (T32*1"F*32) 32mmx1"Fx32mm HYD-FT-1314 U (T32*11/4"F*32) 32mmx11/4"Fx32mm Cap: HYD-CP-2601 U (D1216) 16mm HYD-CP-2602 U (D1418) 18mm HYD-CP-2603 U (D1620) 20mm HYD-CP-2604 U (D2025) 25mm HYD-CP-2606 U (D2026) 26mm HYD-CP-2605 U (D2632) 32mm. Female union: YD-FU-2901 U (H16*1/2F) 16mmx1/2"F HYD-FU-2902 U (H16*3/4F) 16mmx3/4"F HYD-FU-2903 U (H20*1/2F) 20mmx1/2"F HYD-FU-2904 U (H20*3/4F) 20mmx3/4"F HYD-FU-2907 U (H25*1/2F) 25mmx1/2"F HYD-FU-2905 U (H25*3/4F) 25mmx3/4"F HYD-FU-2908 U (H25*1F) 25mmx1"F HYD-FU-2909 U (H26*1/2F) 26mmx1/2"F HYD-FU-2910 U (H26*3/4F) 26mmx3/4"F HYD-FU-2911 U (H26*1F) 26mmx1"F HYD-FU-2906 U (H32*1F) 32mmx1"F. Pipe: HYD-PXAX-1620 (PEXALPEX pipe) 16x2.0mm, HYD-PXAX-1820 (PEXALPEX pipe) 18x2.0mm, HYD-PXAX-2020 (PEXALPEX pipe) 20x2.0mm, HYD-PXAX-2525 (PEXALPEX pipe) 25x2.5mm, HYD-PXAX-2630 (PEXALPEX pipe) 26x3.0mm, HYD-PXAX-3230 (PEXALPEX pipe) 32x3.0mm.

Approval Holder:: Merchant Supplies Distribution Ltd

Company Name
Merchant Supplies Distribution Ltd
Address
Unit 2 Merlin Centre Acrewood Way St. Albans
Postcode
AL4 OJY
Phone
0203 915 2557
General Email
murat@gfsflex.com

View All Listings by this Company

WRAS Approval Number: #250504026

Range of brass fittings with compression connections to be used with copper pipes EN 1057. For above ground use only. Maximum working pressure 6.0 bar. Maximum operating temperature 95°C.

Section:: 1140 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250504026
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Marking:: Bonfix on body. Bonfix, size & product info on compression nut.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: Double straight fittings 82473 10 x 10 82537 12 x 12 82530 15 x 15 82851 18 x 18 82531 22 x 22 82532 28 x 28 82534 35 x 35 82535 42 x 42 82539 54 x 54 Male straight fitting 81103 3/8"x10 82543 3/8"x12 82740 3/8"x15 81113 1/2"x10 82528 1/2"x12 82741 1/2"x15 52491 1/2"x18 82529 1/2"x22 82742 3/4"x15 82492 3/4"x18 82743 3/4"x22 82556 3/4"x28 82744 1"x22 82745 1"x28 82474 5/4"x35 82548 3/2"x42 82549 2"x54 Female straight fitting 99029 3/8"x10 82586 3/8"x12 82575 3/8"x15 81217 1/2"x10 82748 1/2"x12 82581 1/2"x15 52574 1/2"x18 82577 1/2"x22 82749 3/4"x15 52750 3/4"x18 82582 3/4"x22 82585 1"x22 82583 1"x28 82475 5/4"x35 82588 3/2"x42 82589 2" x 54 Reduced straight fitting 82471 12 x 10 82538 15 x 10 82472 15 x 12 52746 18 x 15 82533 22 x 15 82536 28 x 22 82467 35 x 15 82468 35 x 22 SIDE Female TEE 82611 15 x 15 x 1/2" 82641 22 x 22 x 1/2" 82648 22 x 22 x 3/4" TEE ELBOW 82760 15 x 15 x 15 82763 22 x 15 x 15 82762 22 x 15 x 22 82761 22 x 22 x 22 TEE 82453 10x10x10 82452 12x12x12 82501 15x15x15 52871 18x18x18 82502 22x22x22 82503 28x28x28 82516 35x35x35 82517 42x42x42 82451 54x54x54 FEMALE TEE 99952 12x1/2"x12 82645 15x3/8"x15 82646 15x1/2"x15 82791 18x1/2"x18 82792 18x3/4"x18 82640 22x1/2"x22 82647 22x3/4"x22 82642 28x1/2"x28 82643 28x3/4"x28 REDUCED TEE 82454 12x15x12 82455 15x12x12 82456 15x12x15 82457 15x15x12 82504 15x22x15 82506 22x15x15 82505 22x15x22 82507 22x22x15 82519 22x28x22 82458 28x15x22 82508 28x15x28 82459 28x22x15 82513 28x22x22 82514 28x22x28 82509 28x28x15 82515 28x28x22 82476 35x15x35 82477 35x22x35 82478 35x28x35 SIDE M. TEE 82613 15x15x1/2" 82612 22x22x3/4" 82614 22x22x1" 82615 28x28x1"
DOUBLE ELBOW 82527 10x10 82526 12x12 82520 15x15 82861 18x18 82521 22x22 82522 28x28 82523 35x35 82524 42x42 82525 54x54 MALE ELBOW 82804 3/8" x 10 82701 3/8" x 12 82617 3/8" x 15 81811 1/2"x 10 82703 1/2" x 12 82700 1/2" x 15 52566 1/2" x 18 82709 1/2" x 22 82704 3/4" x 15 52862 3/4" x 18 82702 3/4" x 22 82705 3/4" x 28 82706 1 " x 22 82707 1 " x 28 82721 1"1/4x35 82722 1"1/2x42 82723 2"x54 FEMALE ELBOW 82404 3/8" x 10 82598 3/8" x 12 82605 3/8" x 15 82407 1/2" x 10 82596 1/2" x 12 82591 1/2" x 15 52863 1/2" x 18 82595 1/2" x 22 82482 3/4" x 15 52864 3/4" x 18 82592 3/4" x 22 82597 3/4" x 28 82594 1 " x 22 82593 1 " x 28 82559 1"1/4x35 82603 1"1/2x42 WALLPLATE ELBOW 52569 1/2" x 12 82570 1/2" x 15 82469 1/2" x 22 82572 3/4" x 15 82573 3/4" x 22 REDOUBLE ELBOW 82462 12 x 10 82461 15 x 10 82463 15 x 12 82464 22 x 15 82479 28 x 15 82481 28 x 22 ADAPTER ELBOW 84400 15 x 15u CROSS 82510 15 x 15 x 15 x 15 82511 22 x 22 x 22 x 22 82512 28 x 28 x 28 x 28 MALE CAP 82493 10 82494 12 82495 15 82496 22 82497 28 82498 35 CROSS R. 82518 22 x 15 x 22 x 15 82616 22 x 15 x 15 x 15 MALE WALLPLATE ELBOW 82571 3/4" x 15 MALE STRAIGHT FOR RAD. 82800 1/2""x15 DOUBLE ELBOW WITH VENT 82771 22 x 22 ELBOW FOR RAD 82790 1/2"x15

Approval Holder:: Bonfix B.V.

Company Name
Bonfix B.V.
Address
Holsteinstraat 4 8028 RT Zwolle (N1) The Netherlands
General Email
info@bonfix.nl

View All Listings by this Company

WRAS Approval Number: #2211366

‘Flowflex,’ and ‘Opal’ ranges of brass, DZR brass, chromium plated brass, nickel plated brass compression fittings for use with copper pipe to BS EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 1140 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2211366
Size:: See models.
Marking:: FLOWFLEX, Size, EN1542-2, UK or UK Made OPAL, Size, EN1254-2 CR on DZR models
Installation Requirements:: R001
Expiry date:: 30/11/2027
Model:: 99713 Flowflex Brass Compression Straight Coupling 10mm, 44117 Opal Brass Compression Straight Coupling 15mm, 59406 Opal Brass Compression Straight Coupling 22mm, 50808 Opal Brass Compression Straight Coupling 28mm, 57128 Flowflex Brass Compression Reducing Coupling 15 x 8mm, 93356 Flowflex Brass Compression Reducing Coupling 15 x 10mm, 75499 Flowflex Brass Compression Reducing Coupling 22 x 15mm, 44694 Flowflex Brass Compression Reducing Coupling 28 x 22mm, 46376 Opal Brass Compression Repair Coupling 15 x 100mm, 91660 Opal Brass Compression Male Adaptor 15mm x ½”, 60156 Opal Brass Compression Male Adaptor 22mm x ¾”, 12167 Opal Brass Compression Male Adaptor 22mm x 1”, 85952 Opal Brass Compression Male Adaptor 28mm x 1”, 39623 Opal Brass Compression Female Adaptor 15mm x ½”, 37759 Opal Brass Compression Female Adaptor 22mm x ¾”, 20725 Opal Brass Compression Female Adaptor 22mm x 1”, 14922 Opal Brass Compression Female Adaptor 28mm x 1”, 75114 Opal Brass Compression Straight Tap Connector 15mm x ½”, 92409 Opal Brass Compression Straight Tap Connector 22mm x ¾”, 58277 Opal Brass Compression Tank Connector 15mm, 54014 Opal Brass Compression Tank Connector 22mm, 78520 Opal Brass Compression Tank Connector 28mm, 43650 Flowflex DZR Brass Compression Three Piece Reducing Set 15 x 10mm, 21910 Flowflex DZR Brass Compression Three Piece Reducing Set 22 x 15mm, 25902 Flowflex Brass Compression Stop End 10mm, 63232 Opal Brass Compression Stop End 15mm, 28223 Opal Brass Compression Stop End 22mm, 42207 Opal Brass Compression Stop End 28mm, 47899 Flowflex Brass Compression Equal Elbow 10mm, 23847 Opal Brass Compression Equal Elbow 15mm, 19605 Opal Brass Compression Equal Elbow 22mm, 33123 Opal Brass Compression Equal Elbow 28mm, 64668 Opal Brass Compression Male Elbow 15mm x ½”, 33647 Opal Brass Compression Male Elbow 22mm x ¾”, 26618 Opal Brass Compression Female Elbow 15mm x ½”, 48823 Opal Brass Compression Female Elbow 22mm x ¾”, 29554 Opal Brass Compression Wallplate Elbow 15mm x ½”, 46354 Opal Brass Compression Wallplate Elbow 22mm x ¾”, 65566 Opal Brass Compression Bent Tap Connector 15mm x ½”, 17824 Opal Brass Compression Bent Tap Connector 22mm x ¾”, 91205 Flowflex Brass Compression Equal Tee 10mm, 22749 Opal Brass Compression Equal Tee 15mm, 67294 Opal Brass Compression Equal Tee 22mm, 92176 Opal Brass Compression Equal Tee 28mm, 98758 Opal Brass Compression Reduced Branch Tee 22 x 22 x 15mm, 79889 Opal Brass Compression Reduced Branch Tee 28 x 28 x 15mm, 81926 Opal Brass Compression Reduced Branch Tee 28 x 28 x 22mm, 27062 Opal Brass Compression Reduced End Tee 22 x 15 x 22mm, 84560 Opal Brass Compression Reduced Branch and End Tee 22 x 15 x 15mm.

Approval Holder:: Toolstation Ltd.

Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company
Manufacturer:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Country
United Kingdom
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

WRAS Approval Number: #250604024

Range of compression fittings with brass, chrome plated brass bodies. COM RANGE OF COM For use with copper pipe (EN 1057) Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:: 1140 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250604024
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 8MM – 54MM & ¼” – 2”
Marking:: Lawton & size on compression nut.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Bent Tap Connector Compression COMBTC0151/2 – 15mm x ½” Coupling Compression Chrome COMCP015CP – 15mm COMCP022CP – 22mm COMCP028CP – 28mm COMCP035CP – 35mm COMCP042CP – 42mm COMCP054CP – 54mm Coupling Compression COMCP008 – 08mm COMCP010 – 10mm COMCP015 – 15mm COMCP022 – 22mm COMCP028 – 28mm COMCP035 – 35mm COMCP042 – 42mm COMCP054 – 54mm Reducer Coupler COMCP01008 – 10mm x 08mm COMCP01508 – 15mm x 08mm COMCP01510 – 15mm x 10mm COMCP01512 – 15mm x 12mm COMCP02215 – 22mm x 15mm COMCP02815 – 28mm x 15mm COMCP02822 – 28mm x 22mm COMCP03522 – 35mm x 22mm COMCP03528 – 35mm x 28mm 90 Degree Elbow Compression COMEL008 – 08mm COMEL010 – 10mm COMEL015 – 15mm COMEL022 – 22mm COMEL028 – 28mm COMEL035 – 35mm COMEL042 – 42mm COMEL054 – 54mm 45 Degree Elbow Compression COMEL01545 – 15mm COMEL02245 – 22mm COMEL02845 – 28mm 90 Degree Elbow Compression Chrome COMEL015CP – 15mm COMEL022CP – 22mm COMEL028CP – 28mm COMEL035CP – 35mm COMEL042CP – 42mm COMEL054CP – 54mm Equal Tee Compression COMTE008 – 08mm COMTE010 – 10mm COMTE015 – 15mm COMTE022 – 22mm COMTE028 – 28mm COMTE035 – 35mm COMTE042 – 42mm COMTE054 – 54mm Equal Tee Compression Chrome COMTE015CP – 15mm COMTE022CP – 22mm COMTE028CP – 28mm COMTE035CP – 35mm COMTE042CP – 42mm COMTE054CP – 54mm Cross Tee Compression COMCR015 – 15mm COMCR022 – 22mm COMCR028 – 28mm Male Iron Coupling Compression COMCPMI0081/4 – 08mm x ¼” COMCPMI0101/4 – 10mm x ¼” COMCPMI0103/8 – 10mm x 3/8” COMCPMI0151/4 – 15mm x ¼” COMCPMI0153/8 – 15mm x 3/8” COMCPMI0151/2 – 15mm x ½” COMCPMI0153/4 – 15mm x ¾” COMCPMI0221/2 – 22mm x ½” COMCPMI0223/4 – 22mm x ¾” COMCPMI0221 – 22mm x 1 “ COMCPMI0283/4 – 28mm x ¾” COMCPMI0281 – 28mm x 1” COMCPMI03511/4 – 35mm x 1 ¼” COMCPMI04211/2 – 42mm x 1 ½” COMCPMI0542 – 54mm x 2” Male Iron Coupling Chrome Compression COMCPMI0151/2CP – 15mm x ½” COMCPMI0223/4CP – 22mm x ¾” Female Iron Coupling Compression COMCPFI0101/4 – 10mm x ¼” COMCPFI0151/4 – 15mm x ¼” COMCPFI051/2 – 15mm x ½” COMCPFI0153/4 – 15mm x ¾” COMCPFI0221/2 – 22mm x ½” COMCPFI0223/4 – 22mm x ¾” COMCPFI0221 – 22mm x 1 “ COMCPFI0281 – 28mm x 1” COMCPFI03511/4 – 35mm x 1 ¼” COMCPFI04211/2 – 42mm x 1 ½” COMCPFI0542 – 54mm x 2” Female Iron Coupling Chrome Compression COMCPFI0151/2CP – 15mm x ½” COMCPFI0223/4CP – 22mm x ¾” Female Iron Elbow Chrome Compression COMELFI0151/2CP – 15mm x ½” COMELFI0223/4CP – 22mm ¾” COMELFI0221CP – 22mm x 1” Male Iron Elbow Compression COMELMI0151/2 – 15mm x ½” COMELMI0153/4 – 15mm x ¾” COMELMI0223/4 – 22mm x ¾” COMELMI0281 – 28mm x 1” COMELMI03511/4 – 35mm x 1 ¼” Female Iron Elbow Compression COMELFI0151/2 – 15mm x ½” COMELFI0153/4 – 15mm x ¾” COMELFI0221/2 – 22mm x ½” COMELFI0223/4 – 22mm x ¾” COMELFI0221 – 22mm 1 “ COMELFI0281 – 28mm x 1” COMELFI03511/4 – 35mm x 1 ¼” COMELFI04211/2 – 42mm x 1 ½” COMELFI0542 – 54mm x 2” Male Iron Elbow Chrome Compression COMELMI0151/2CP – 15mm x ½” COMELMI0223/4CP – 22mm x ¾” Wallplate Elbow Compression COMELWL0151/2 – 15mm x ½” COMELWL0223/4 – 22mm x ¾” Wallplate Elbow Chrome Compression COMELWL0151/2CP – 15mm x ½” Male Iron Coupler Taper Thread COMTTCPMI0151/2 – 15mm x ½” COMTTCPMI0223/4 – 22mm x ¾” COMTTCPMI0281 – 28mm x 1” Male Coupler Ext Taper Thread COMETTCPMI0223/4 – 22mm x ¾” Crossover Compression COMC022 – 22mm End Cap Compression COMEC008 – 08mm COMEC010 – 10mm COMEC015 – 15mm COMEC022 – 22mm COMEC028 – 28mm COMEC035 – 35mm COMEC042 – 42mm COMEC054 – 54mm End Cap Compression Chrome Plated COMEC015CP – 15mm COMEC022CP – 22mm COMEC028CP – 28mm COMEC035CP – 35mm COMEC042CP – 42mm COMEC054CP – 54mm Red Tee Compression COMTE0151522 – 15mm x 15mm x 22mm COMTE0221515 – 22mm x 15mm x 15mm COMTE0221522 – 22mm x 15mm x 22mm COMTE0222215 – 22mm x 22mm x 15mm COMTE0281528 – 28mm x 15mm x 28mm COMTE0282228 – 28mm x 22mm x 28mm COMTE0282815 – 28mm x 28mm x 15mm COMTE0282822 – 28mm x 28mm x 22mm Female Tee Compression COMTEFI015151/2 – 15mm x 15mm x ½” COMTEFI022221/2 – 22mm x 22mm x ½” COMTEFI022223/4 – 22mm x 22mm x ¾” COMTEFI028281 – 28mm x 28mm x 1” Red Tee Chrome Compression COMTE0151522CP – 15mm x 15mm x 22mm COMTE0221515CP – 22mm x 15mm x 15mm COMTE0222215CP – 22mm x 22mm x 15mm COMTE0222228CP – 22mm x 22mm x 28mm Reducing Sets Compression COMRS0108 – 10mm x 08mm COMRS0158 – 15mm x 08mm COMRS01510 – 15mm x 10mm COMRS02215 – 22mm x 15mm COMRS02822 – 28mm x 22mm COMRS03515 – 35mm x 15mm COMRS03522 – 35mm x 22mm COMRS03528 – 35mm x 28mm COMRS04215 – 42mm x 15mm COMRS04222 – 42mm x 22mm COMRS04228 – 42mm x 28mm COMRS04235 – 42mm x 35mm COMRS05422 – 54mm x 22mm COMRS05428 – 54mm x 28mm COMRS05435 – 54mm x 35mm COMRS05442 – 54mm x 42mm Tank Connector Compression COMTC015 – 15mm COMTC022 – 22mm COMTC028 – 28mm COMTC035 – 35mm COMTC042 – 42mm COMTC054 – 54mm Repair Coupling Compression COMRCP015 – 15mm COMRCP022 – 22mm Straight Tap Connect Compression COMSTC0151/2 – 15mm x ½” COMSTC0153/4 – 15mm x ¾” Red Elbow Compression COMREL02215 – 22mm x 15mm

Approval Holder:: Lawton Tube Company Limited.

Company Name
Lawton Tube Company Limited.
Address
Torrington Avenue Tile Hill Coventry
Postcode
CV4 9AB

View All Listings by this Company

WRAS Approval Number: #250415020

Range of brass compression fittings for use with copper pipes and Irish copper pipe (both manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperatures: 32612, 32634, 32712 & 32734 models: 65°C. All other models: 85°C.

Section:: 1150 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, metal, for use with copper tube - above ground use only.
WRAS Approval Number:: 250415020
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: Excel & size on compression nut
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: 31012 1/2” Straight Coupler CxC 31034 3/4” Straight Coupler CxC 3101 1” Straight Coupler CxC 310114 11/4” Straight Coupler CxC 310112 11/2” Straight Coupler CxC 3102 2” Straight Coupler CxC 3103412 3/4"*1/2" Straight Coupler CxC 3101X12 1"*1/2" Straight Coupler CxC 310134 1"*3/4" Straight Coupler CxC 31011434 11/4"*3/4" Straight Coupler CxC 3101141 11/4"*1" Straight Coupler CxC 3101012 1/2"*10mm Straight Coupler CxC 3101212 1/2"*12mm Straight Coupler CxC 3101512 1/2"*15mm Straight Coupler CxC 3102234 3/4"*22mm Straight Coupler CxC 31012L 1/2"*1/2" Repair Coupling CXC 31034L 3/4"*3/4" Repair Coupling CXC 31112 1/2" Straight Coupler M.I. X C 31134 3/4"Straight Coupler M.I. X C 3111 1"Straight Coupler M.I. X C 311114 11/4"Straight Coupler M.I. X C 311112 11/2"Straight Coupler M.I. X C 3112 2"Straight Coupler M.I. X C 3111234 1/2"M*3/4"Straight Coupler M.I. X C 3113412 3/4"M*1/2"Straight Coupler M.I. X C 311134 1"M*3/4"Straight Coupler M.I. X C 311341 3/4"M*1"Straight Coupler M.I. X C 3111114 1"M*1.1/4"Straight Coupler M.I. X C 3111141 11/4"M*1"Straight Coupler M.I. X C 311112114 11/2"M*11/4"Straight Coupler M.I. X C 3112112 2"M*1 1/2"Straight Coupler M.I. X C 31212 1/2"Straight Coupler F.I. x C 31234 3/4"Straight Coupler F.I. x C 3121 1"Straight Coupler F.I. x C 312114 11/4"Straight Coupler F.I. x C 312112 11/2"Straight Coupler F.I. x C 3122 2"Straight Coupler F.I. x C 3121234 1/2"F*3/4"Straight Coupler F.I. x C 3123412 3/4"F*1/2"Straight Coupler F.I. x C 312134 1"F*3/4"Straight Coupler F.I. x C 312341 3/4"F*1"Straight Coupler F.I. x C 3121141 11/4"F*1"Straight Coupler F.I. x C 3121114 1“F*11/4"Straight Coupler F.I. x C 3122112 2“F*11/2"Straight Coupler F.I. x C 32612 1/2"Swivel Coupler F.I. x C 32634 3/4"Swivel Coupler F.I. x C 31512 1/2"Elbow C x C 31534 3/4"Elbow C x C 3151 1"Elbow C x C 315114 11/4"Elbow C x C 315112 11/2"Elbow C x C 3152 2"Elbow C x C 3153412 3/4"*1/2"Elbow C x C 315134 1"*3/4"Elbow C x C 3151512 1/2"*15mm Elbow C x C 3152234 3/4"*22mm Elbow C x C 31612 1/2" Elbow M.I. x C 31634 3/4"Elbow M.I. x C 3161 1"Elbow M.I. x C 316114 11/4"Elbow M.I. x C 316112 11/2"Elbow M.I. x C 3162 2"Elbow M.I. x C 3163412 3/4"M*1/2"Elbow M.I. x C 316134 1"M*3/4"Elbow M.I. x C 3161234 1/2"M*3/4"Elbow M.I. x C 316341 3/4"M*1"Elbow M.I. x C 31712 1/2" Elbow F.I. x C 31734 3/4"Elbow F.I. x C 3171 1"Elbow F.I. x C 317114 11/4"Elbow F.I. x C 317112 11/2"Elbow F.I. x C 3172 2"Elbow F.I. x C 3171234 1/2"F*3/4"Elbow F.I. x C 3173412 3/4"F*1/2"Elbow F.I. x C 317341 3/4"F*1"Elbow F.I. x C 317134 1"F*3/4"Elbow F.I. x C 317W12 1/2"F*1/2" Wallplate Elbow F.I. x C 317W34 3/4"F*3/4" Wallplate Elbow F.I. x C 317W1234 1/2"F*3/4" Wallplate Elbow F.I. x C 31812 1/2" Equal Tees CxCxC 31834 3/4" Equal Tees CxCxC 3181 1" Equal Tees CxCxC 318114 11/4" Equal Tees CxCxC 318112 11/2" Equal Tees CxCxC 3182 2" Equal Tees CxCxC 3181234 1/2"*1/2"*3/4"Reducing Tee C x C x C 3183412 3/4"*3/4"*1/2"Reducing Tee C x C x C 318341 3/4"*3/4"*1"Reducing Tee C x C x C 3181112 1"*1"*1/2"Reducing Tee C x C x C 3181134 1"*1"*3/4"Reducing Tee C x C x C 31811412 1 1/4"*1 1/4"*1/2"Reducing Tee C x C x C 31811434 1 1/4"*1 1/4"*3/4"Reducing Tee C x C x C 3181141 1 1/4"*1 1/4"*1"Reducing Tee C x C x C 31811234 1 1/2"*1 1/2"*3/4"Reducing Tee C x C x C 318112X1 1 1/2"*1 1/2"*1"Reducing Tee C x C x C 318112114 1 1/2"*1 1/2"*1 1/4"Reducing Tee C x C x C 318341234 3/4"*1/2"*3/4"Reducing Tee C x C x C 3181121 1"*1/2"*1"Reducing Tee C x C x C 3181X1234 1"*1/2"*3/4"Reducing Tee C x C x C 3181341 1"*3/4"*1"Reducing Tee C x C x C 318341212 3/4"*1/2"*1/2"Reducing Tee C x C x C 31813434 1"*3/4"*3/4"Reducing Tee C x C x C 31813412 1"*3/4"*1/2"Reducing Tee C x C x C 31811212 1"*1/2"*1/2"Reducing Tee C x C x C 318101012 10mm*10mm*1/2"Reducing Tee C x C x C 318121010 1/2"*10mm*10mm Reducing Tee C x C x C 318121012 1/2"*10mm*1/2"Reducing Tee C x C x C 318121210 1/2"*1/2"*10mm Reducing Tee C x C x C 32212 1/2" Cross CxCxCxC 32234 3/4"Cross CxCxCxC 3223412 3/4"*1/2"*1/2"*1/2"Cross CxCxCxC 32712 1/2" Swivel Elbow F.I. x C 32734 3/4" Swivel Elbow F.I. x C 33012 1/2"Tee CxCxF.I. 33034 3/4"Tee CxCxF.I. 3301 1"Tee CxCxF.I. 3303412 3/4"*3/4"*1/2"F Tee CxCxF.I. 330112 1"*1"*1/2"F Tee CxCxF.I. 330134 1"*1"*3/4"F Tee CxCxF.I. 3483412 3/4"*1/2" Reducing Set 348112 1"*1/2" Reducing Set 348134 1"*3/4" Reducing Set 34811412 11/4"*1/2" Reducing Set 34811434 11/4"*3/4" Reducing Set 3481141 11/4"*1" Reducing Set 34811212 11/2"*1/2" Reducing Set 34811234 11/2"*3/4" Reducing Set 3481121 11/2"*1" Reducing Set 348112114 11/2"*11/4" Reducing Set 348212 2"*1/2" Reducing Set 348234 2"*3/4" Reducing Set 34821 2"*1" Reducing Set 3482114 2"*11/4" Reducing Set 3482112 2"*11/2" Reducing Set 35012 1/2"Flanged Tank Connector with Backnut 35034 3/4"Flanged Tank Connector with Backnut 3501 1"Flanged Tank Connector with Backnut 350114 11/4"Flanged Tank Connector with Backnut 350112 11/2"Flanged Tank Connector with Backnut 3502 2"Flanged Tank Connector with Backnut 35112 1/2"Stop End 35134 3/4"Stop End 3511 1"Stop End 351114 11/4"Stop End 351112 11/2"Stop End 3512 2"Stop End 37212 1/2"Blank Cap and Washers 37234 3/4"Blank Cap and Washers 3721 1"Blank Cap and Washers 372114 11/4"Blank Cap and Washers 372112 11/2"Blank Cap and Washers 3722 2"Blank Cap and Washers 378A12 1/2"Coupling Nut 378A34 3/4"Coupling Nut 378A1 1"Coupling Nut 378A114 11/4"Coupling Nut 378A112 11/2"Coupling Nut 378A2 2"Coupling Nut 378B12 1/2"Compression Ring 378B34 3/4"Compression Ring 378B1 1"Compression Ring 378B114 11/4"Compression Ring 378B112 11/2"Compression Ring 378B2 2"Compression Ring

Approval Holder:: Excel Industries Ltd

Company Name
Excel Industries Ltd
Address
Coolmine Industrial Estate Clonsilla Road Dublin 15
Postcode
D15N704
Country
Ireland
Phone
+35 31811 8701
General Email
stephen.hope@excel-industries.com

View All Listings by this Company