Directory Search Results

Fittings Materials
Print List

#2112526

'EPNE-50'. Black coloured, compression moulded EPDM rubber material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2112526
Expiry date:
31/12/2026
Approval Holder:
National Engineering Industries Ltd. (Rubber Division)
Company Name
National Engineering Industries Ltd. (Rubber Division)
Address
2 Beerpara Lane, Dum Dum, Kolkata 700030
Country
India

View All Listings by this Company

Print This Approval

#2202549

'EWDRI 50, EWDRI 55, EWDRI 60, EWDRI 65, EWDRI 70 & EWDRI 80'. Black coloured, compression moulded EPDM rubber materials. Shore hardness between 50 & 80. Tested in-radius size 0.69mm. 'EWDRI 50' is for use with water up to 70°C. 'EWDRI 55, EWDRI 60, EWDRI 65, EWDRI 70 & EWDRI 80' are for use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2202549
Expiry date:
28/02/2027
Approval Holder:
Deesawala Rubber Industries
Company Name
Deesawala Rubber Industries
Address
5-5-65/S12A, S.A. Trade Centre, Ranigunj 'X' Road, Secunderabad, Pin-500003, Telengana
Country
India

View All Listings by this Company

Print This Approval

#2108543

'ESW-70'. Black coloured, injection moulded EPDM material. Shore hardness 70. Tested in-radius size 0.5mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2108543
Expiry date:
31/08/2026
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2112530

'E51-70'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.02mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2112530
Expiry date:
31/12/2026
Approval Holder:
Gulf Rubber Group - Tumedei SpA
Company Name
Gulf Rubber Group - Tumedei SpA
Address
Via Bolzano 12, 38061 Ala (TN)
Country
Italy

View All Listings by this Company

Print This Approval

#2204504

'EUW-75'. Black coloured, compression moulded EPDM rubber material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204504
Expiry date:
30/04/2027
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2204505

'EUW-80'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204505
Expiry date:
30/04/2027
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2204506

'EUW-60'. Black coloured, compression moulded EPDM rubber material. Shore hardness 60. Tested in-radius size 0.9mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204506
Expiry date:
30/04/2027
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2204519

'JJSXEPDMIRHD50 (shore hardness 50) & JJSXEPDMIRHD70 (shore hardness 70)'. Black coloured, compression moulded EPDM materials. Tested in-radius size 0.99mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204519
Expiry date:
30/04/2027
Approval Holder:
JingJiang SanXing Rubber Products Co. Ltd.
Company Name
JingJiang SanXing Rubber Products Co. Ltd.
Address
No. 10, West ZhongZhou Road, JingJiang City, JiangSu Province
Country
China

View All Listings by this Company

Print This Approval

#2204523

'VL1713M266B Black'. Black coloured, compression moulded EPDM rubber material. Shore hardness 60. Tested in-radius size 1.02mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204523
Expiry date:
30/04/2027
Approval Holder:
Vernay Laboratories Inc
Company Name
Vernay Laboratories Inc
Address
120E South College Street Yellow Springs Ohio 45387
Country
USA
Phone
Tel: +1 937 7677261 Fax: +1 937 7677913

View All Listings by this Company

Print This Approval

#2204526

‘AA9HWZ (88 Sh.)’. Grades ‘AA6HWZ (60 Sh.), AA7HWZ (70 Sh.), AA7SWZ (70 Sh.), AA8HWZ (80 Sh.) were added in December 2022. Black coloured, compression moulded EPDM sheet materials. With a shore hardness of between 60 & 88. Tested in-radius size 1.15mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204526
Expiry date:
30/04/2027
Approval Holder:
Gummiwerk Kraiburg GmbH & Co
Company Name
Gummiwerk Kraiburg GmbH & Co
Address
Teplitzer Strasse 20, D-84478 Waldkraiburg
Country
Germany
Phone
+49 8638 610 Fax: +49 8638 61310

View All Listings by this Company

Print This Approval

#2105527

'EPDM G7503'. Black coloured, injection moulded EPDM rubber material. Shore hardness 75. Tested in-radius size 1.1mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2105527
Expiry date:
31/05/2026
Approval Holder:
Jeantet Elastomers
Company Name
Jeantet Elastomers
Address
6 Faubourge Des Moulins, BP 117, 39206 Saint Claude Cedex
Country
France
Phone
(33) 03 84 45 03 57 Fax: +33 3 8445 6666
General Email
jeantet@jeantet.com

View All Listings by this Company

Print This Approval

#2205535

'TIMO 7 NC-70'. Black coloured, injection moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2205535
Expiry date:
31/05/2027
Approval Holder:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Country
Italy
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval

#2204534

'AES-2/EPDM-50'. Black coloured, compression moulded EPDM sheet material. Shore hardness 50. Tested in-radius size 1.1mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204534
Expiry date:
30/04/2027
Approval Holder:
Allianz Elastomer OPP - Samarpan Lamination
Company Name
Allianz Elastomer OPP - Samarpan Lamination
Address
Rajpar Road, At-Sanala, Morbi - 363641
Country
India

View All Listings by this Company

Print This Approval

#2205542

'AEH-5/EPDM-80'. Black coloured, compression moulded EPDM material. Shore hardness 80.Tested in-radius size 1.1mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2205542
Expiry date:
31/05/2027
Approval Holder:
Allianz Elastomer OPP - Samarpan Lamination
Company Name
Allianz Elastomer OPP - Samarpan Lamination
Address
Rajpar Road, At-Sanala, Morbi - 363641
Country
India

View All Listings by this Company

Print This Approval

#2209502

'EP701253C'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2209502
Expiry date:
30/09/2027
Approval Holder:
Fannteer Corporation
Company Name
Fannteer Corporation
Address
2F, No. 77, Zhouzi Street, Neihu District, Taipei City 114680
Country
Taiwan
Phone
+886 2 2577 4691
General Email
info@fannteer.com.tw

View All Listings by this Company

Print This Approval

#2205545

'E2514'. Black coloured, compression moulded EPDM rubber. Shore hardness 67. Tested in-radius size 1.03mm. For use with water up to 60°C,

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2205545
Expiry date:
31/05/2027
Approval Holder:
Semperit Technische Produkte GmbH
Company Name
Semperit Technische Produkte GmbH
Address
Bundesstrasse 26, 2632 Wimpassing
Country
Austria
Phone
+43 2630 310 0 Fax: +43 2630 475
General Email
office@semperit.at

View All Listings by this Company

Print This Approval

#2206508

'AA7LNZ'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2206508
Expiry date:
30/06/2027
Approval Holder:
Gummiwerk Kraiburg GmbH & Co
Company Name
Gummiwerk Kraiburg GmbH & Co
Address
Teplitzer Strasse 20, D-84478 Waldkraiburg
Country
Germany
Phone
+49 8638 610 Fax: +49 8638 61310

View All Listings by this Company

Print This Approval

#2111541

'XR0240012'. Black coloured, compression moulded EPDM material. Shore hardness 40. Tested in-radius size 1.5mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2111541
Expiry date:
30/11/2026
Approval Holder:
Changtai Sinrun Rubber-Plastic Co. Ltd.
Company Name
Changtai Sinrun Rubber-Plastic Co. Ltd.
Address
Xingtai Development Zones, Changtai county, Zhangzhou, Fujian Province
Country
China

View All Listings by this Company

Print This Approval

#2109564

'EPDM 69064340'. Black coloured, injection moulded EPDM sheet material. Shore hardness 57. Tested in-radius size 0.9mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2109564
Expiry date:
30/09/2026
Approval Holder:
Trelleborg Pipe Seals
Company Name
Trelleborg Pipe Seals
Address
Pascallaan 80, 8218NJ Lelystad
Country
Netherlands

View All Listings by this Company

Print This Approval

#2203549

'XXE03'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.05mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2203549
Expiry date:
31/03/2027
Approval Holder:
Xingtai Rubber Factory
Company Name
Xingtai Rubber Factory
Address
No. 175 North Xingzhou Road, Xingtai City, Hebei Province
Country
China

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 34 of 112

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.