Water Meters
Section Code 1505 : Meters in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009, and have not been checked for accuracy by the Scheme.
Back To Directory Sections
WRAS Approval Number: #2302707
Range of water meters with blue epoxy coated ductile iron bodies, plastic measurement chambers and vanes and NBR ‘O’-rings.
Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
- Section:
- 1505 Water Meters
- Size:
- Flanged inlet/outlet: DN40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400.
- Marking:
- Flow arrow & size on side of body,
Genebre, size, Model number and pressure rating and product info on dial face.
- Installation Requirements:
- R001
- Expiry date:
- 29/02/2028
- Model:
-
6060 & 6060A
- Approval Holder:
- Genebre, S.A
Company Name
Genebre, S.A
Address
Avinguda Joan Carles I, 46 – 48,
Edificio GENEBRE
Hospitalet de Llobregat
Postcode
08908
Country
Spain
Phone
(+34) 93 298 80 00
General Email
cazorla@genebre.es
View All Listings by this Company
WRAS Approval Number: #2312804
Range of water meters with brass bodies and plastic turbines. The inlet incorporates a plastic filter.
Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
- Section:
- 1505 Water Meters
- Size:
- ¾” BSP (M) inlet/outlet (DN15).
1” BSP (M) inlet/outlet (DN20).
1¼” BSP (M) inlet/outlet (DN25).
1½” BSP (M) inlet/outlet (DN32)
2” BSP (M) inlet/outlet (DN40)
- Marking:
- Genebre, year of manufacture (yy), ‘NWM’ & technical info on dial facer. Flow arrow on body.
- Installation Requirements:
- R001
- Expiry date:
- 31/12/2028
- Model:
-
6110C
6115C
6120C
6111C
6121C
- Approval Holder:
- Genebre, S.A
Company Name
Genebre, S.A
Address
Avinguda Joan Carles I, 46 – 48,
Edificio GENEBRE
Hospitalet de Llobregat
Postcode
08908
Country
Spain
Phone
(+34) 93 298 80 00
General Email
cazorla@genebre.es
View All Listings by this Company
WRAS Approval Number: #240902086
Range of water meters with either cast iron (blue epoxy coated) or stainless-steel bodies, transducers and EPDM rubber O-rings.
Maximum working pressure 25.0 Bar.
Maximum operating temperature 50.0°C.
- Section:
- 1505 Water Meters
- Basis of Compliance:
- Tested to regulators Specification Test Code Sheets
- Size:
- Flanged - DN40 to DN100.
- Marking:
- Hidroconta, NAUTILUS and product information on face.
- Installation Requirements:
- R001
- Expiry date:
- 30/09/2029
- Model:
-
NAUTILUS
- Approval Holder:
- Hidroconta S.A.
Company Name
Hidroconta S.A.
Address
Ctra Santa Catalina 60
30012 Murcia
Spain
General Email
ivan@hidroconta.com
View All Listings by this Company
WRAS Approval Number: #250402022
‘Altair V4’ range of in-line and manifold volumetric water meters with brass or plastic bodies (see models), the products can be provided with a plastic strainer.
Maximum working pressure 16.0 bar. Cold water use only.
- Section:
- 1505 Water Meters
- Basis of Compliance:
- Tested to regulators Specification Test Code Sheets
- Size:
- 1” BSP (M) (Inline Models) or 1.1/2” BSP (M) (Concentric Models).
- Marking:
- DIEHL Metering, PN and technical information on meter face. Flow arrow on body (inline models).
DIEHL Metering, PN and technical information on meter face (concentric models).
- Installation Requirements:
- R001
- Expiry date:
- 30/04/2030
- Model:
-
Inline Models:
ALTAIR V4 20/165 (Brass body),
ALTAIR V4 20/190 (Brass or Plastic body),
Where 20 denotes DN size and 165 or 190 = length in mm.
Concentric Models:
ALTAIR V4 CONCENTRIC (Brass or Plastic body),
- Manufacturer:
- Diehl Metering S.A.S
Company Name
Diehl Metering S.A.S
Address
67, Rue du Rhone,
BP 10160,
68304 Saint Louis
Country
Cedex,
View All Listings by this Company
WRAS Approval Number: #250402023
Range of inline water meters with either brass or plastic bodies incorporating EPDM ‘O’-rings and can be provided with a plastic strainer.
Maximum working pressure 16 Bar Cold water use.
- Section:
- 1505 Water Meters
- Basis of Compliance:
- Tested to regulators Specification Test Code Sheets
- Size:
- ¾” BSP male inlets and outlets.
- Marking:
- DIEHL Metering, PN and other technical information on meter face. Flow arrow on body.
- Installation Requirements:
- R001
- Expiry date:
- 30/04/2030
- Model:
-
ALTAIR V4 IS (Brass Body)
ALTAIR V4 IS (Plastic Body)
ALTAIR V4 (Brass Body)
ALTAIR V4 (Plastic Body)
- Manufacturer:
- Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Company Name
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Country
View All Listings by this Company
Page 33 of 34
