'Sikalastic® M689 AE (formerly known MasterSeal® M689AE)'. Factory applied, two-component, light grey coloured (once applied), polyurea coating. Mix parts A & B in a volume ratio of 1:1 and apply as per manufacturer's Product Data Sheet 'MBS_CC-UAE/Sl_M689_06_20/v9/07_23/v10/01_24/v11/03_24'. Cure for 7 days@25°C. For use with water up to 70°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240455060

Expiry date:

30/04/2029

Approval Holder:

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Company Name

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Address

Head Office: P.O. Box 37127, Dubai Investment Park, Phase 1 Expo Road, Dubai

Country

United Arab Emirates

View All Listings by this Company

'Sikadur® ADH2200 (formerly known MasterBrace® ADH2200)'. Site applied, grey coloured (once applied), two component Epoxy bedding and mortar. Mix parts A and B in a weight ratio of 60:40 and apply as per manufacturer's Product Data Sheet 'MBS_CC-UAE/Br_2200_12_94/v4/07_19/v5/05_20/v6/01_24/v7/03_24'. Cure for 21 days@25°C. For use with water up to 40°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

240455061

Expiry date:

30/04/2029

Approval Holder:

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Company Name

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Address

Head Office: P.O. Box 37127, Dubai Investment Park, Phase 1 Expo Road, Dubai

Country

United Arab Emirates

View All Listings by this Company

'VESTAMID L1930 Material (Natural)'. Natural (appears beige in colour), injection moulded polyamide 12 material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240555042

Expiry date:

31/05/2029

Approval Holder:

Evonik Operations GmbH

Company Name

Evonik Operations GmbH

Address

Paul-Baumann-Str. 1, 45772 Marl

Country

Germany

View All Listings by this Company

'IROGRAN® A 85 P 4394 FCM'. Clear (colourless), injection moulded polyurethane material. For use with water up to 60°C.

Section:

5297 Polyurethane

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240255056

Expiry date:

28/02/2029

Approval Holder:

Huntsman (Germany) GmbH

Company Name

Huntsman (Germany) GmbH

Address

Hafenringstr. 1, 49090 Osnabrueck

Country

Germany

View All Listings by this Company

‘D-TECH DTCAPOL-300’. Site applied, grey coloured chemical anchor resin which is supplied in a pre-mixed cartridge. Apply as per manufacturer’s instructions dated 29.01.2021. Cure for 4 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5311 Resin Anchors

Expiry date:

31/05/2027

Approval Holder:

Vermont Sales Pty., Ltd.

Company Name

Vermont Sales Pty., Ltd.

Address

192 Tsessebe Cresent, Corporate Park South, Old Pretoria Road, Midrand

Country

South Africa

View All Listings by this Company

'9710 'O' Rings'. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 75. Tested in-radius size between 0.5mm & 3.4mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

240755008

Expiry date:

31/07/2029

Approval Holder:

Gulf Rubber Group - Tumedei SpA

Company Name

Gulf Rubber Group - Tumedei SpA

Address

Via Bolzano 12, 38061 Ala (TN)

Country

Italy

View All Listings by this Company

'6741'. Brown coloured, compression moulded FKM material. Shore hardness 70. Tested in-radius size 0.95mm. For use with water up to 85°C.

Section:

5375 Rubbers

Section Subtitle:

Fluorocarbon - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240655005

Expiry date:

30/06/2029

Approval Holder:

Gulf Rubber Group - Tumedei SpA

Company Name

Gulf Rubber Group - Tumedei SpA

Address

Via Bolzano 12, 38061 Ala (TN)

Country

Italy

View All Listings by this Company

'RIAMAXX HR XE4349 KTW natur. RIAMAXX HR XE4349 KTW schwarz. RIAMAXX HR XE4350 KTW natur. RIAMAXX HR XE4350 KTW schwarz. RIAMAXX HR XE4351 KTW natur. RIAMAXX HR XE4351 KTW schwarz. RIAMAXX HR XE4352 KTW natur. RIAMAXX HR XE4352 KTW schwarz'. Natural (appears beige) and black coloured, injection moulded Polyketone materials. For use with water up to 85°C.

Section:

5585 Thermoplastic Moulding Compound

Expiry date:

30/06/2029

Approval Holder:

RIA-Polymers GmbH.

Company Name

RIA-Polymers GmbH.

Address

Schwarzwaldring 2, 78658 Zimmern o.R, BW 78658

Country

Germany

View All Listings by this Company

Wall mounted electric heater, incorporate a manually operated push button valve controlling the flow and plastic strainer on the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 53°C. Cold supply only.

Section:

1361 Heaters

Section Subtitle:

Electric Shower

WRAS Approval Number:

2203379

Size:

15mm plastic pipe.

Marking:

Redring, model, address and other technical information on adhesive label on bottom panel.

Installation Requirements:

R001 R040

Expiry date:

31/03/2027

Model:

43678902

Approval Holder:

RKW Ltd

Company Name

RKW Ltd

Address

Sutton House Berry Hill Road

Postcode

ST4 2NL

View All Listings by this Company

‘Wall mounted, electronically operated tap assemblies (brass bodies - in various finishes). The flow is controlled by a solenoid valve that is actuated via an infra-red sensor on the spout. The spout outlet incorporates plastic aerators. Maximum working pressure 6 bar. Maximum operating temperature 65°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

240604031

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP(M)

Marking:

Dolphin logo on spout.

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

DS101.bbb.d.ee DS102.bbb.d.ee DS103.bbb.d.ee DS104.bbb.d.ee ‘aaa’ denotes the style type, the following options are available: DS101 - 90° bent spout, DS102 - 90° bent spout with wall plate fixing kit, DS103 - 55° bent spout or DS104 - 55° bent spout with wall plate fixing kit. ‘bbb’ denotes the projection of the spout from wall to spout outlet in mm. Range 107mm – 330mm. ‘d’ denotes the surface finish (which is a non-water contact part). It will always be 1 digit and either a letter or numbers. As examples: 1 = brushed satin stainless steel, 3 = PVD coated brushed satin stainless steel. ‘ee’ denotes the surface colour (which is a non-water contact part) where applicable. It will always be 2 digits, which can be any combination of numbers and/or letters. As examples: 01 = RAL9005 Black, 51 = PVD Gold finish Models may include an additional ‘.R’ suffix which denotes that the tap is supplied without the rosette, or an additional ‘fff’ suffix to denote a non-standard size Rosette (which is a non-water contact part) It will always be 2-3 digits, which can be any combination of numbers and/or letters

Product Images

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Manufacturer:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company