Water Regulations Approval Scheme Ltd

Pumps

Section Code 1610 : Wholesome water use.

WRAS Approval Number: #250302718

Range of multistage centrifugal pumps with stainless steel impellers, intermediate chambers, shaft and outer sleeve. The Movitec VME models and VE/VSE models added May 2025 can also incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressures: Existing models: Comeo C models 10.0 bar, Movitec VM models with an oval flange or VME models with integral check valve 16.0 bar, All other Movitec VM models 25.0 bar. Models added May 2025: Movitec V/VS models with an oval flange or VE models with integral check valve 16.0 bar, All other Movitec V/VS models and Movitec HI/HSI models 25.0 bar. Maximum operating temperatures: Existing models: Comeo C and Movitec VME models with integral check valve 60°C, all other model variants 100°C. Models added May 2025: Movitec VE models with integral check valve 60°C, all other model variants 100°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250302718
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Movitec VM (-/F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. Comeo C 2/4/6 B: 1¼” BSP (F) inlet x 1” BSP (F) outlet. Sizes added May 2025: Movitec V/VS (-/F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. Movitec V/VS (-/F/E/V/T) 10 B/15 B/15 C: Oval flange: DN40, DN50. Round flange: DN40, DN50. External threaded: 1½” BSP (M), Victaulic: DN50 and Tri-clamp: DN50. Movitec V/VS F 25/40/60/90/125 B: Round flange: DN65, DN80, DN100, DN125. Movitec HI/HSI 2/4/6 B: 1¼” BSP or NPT (F). Movitec HI/HSI 10/15 B: 2” BSP or NPT (F).
Marking:: KSB logo, model name, PN, WRAS and technical information on adhesive label on body.
Installation Requirements:: R001 R415
Expiry date:: 31/03/2030
Model:: Movitec VM (-/F/E/V/T) x yy B, Comeo C x yy B. Where: VM = Vertically oriented (AISI 304) with close coupled motor/ pump (pump/ motor shaft combined). No indication (VM only) = oval flange. F (VMF) = round flange. E (VME) = external tread. V (VMV) = Victaulic. T (VMT) = Triclamp. x = flow rate m³/h (2, 4 or 6). yy = no. of stages Movitec VM and Comeo C ranges 1-6 stages. Models added May 2025: Movitec V/VS (-/F/E/V/T) x yy B, Movitec V/VS (-/F/E/V/T) 15 yy C. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. No indication (V/VS only) = oval flange. F (VF/VSF) = round flange. E (VE) = external thread. V (VV/VSV) = Victaulic. T (VT/VST) = Triclamp. x = flow rate m³/h (2, 4, 6, 10, 15). yy = no. of stages Movitec V/VS……2 B 1-30 stages. Movitec V/VS……4/6 B 1-26 stages. Movitec V/VS……10 B 1-21 stages. Movitec V/VS……15 B/C 1-17 stages. -------------------------------------- Movitec V/VS F xx yy B. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. F (VF/VSF) = round flange. x = flow rate m³/h (25, 40, 60, 90 or 125). yy = no. of stages Movitec V/VS……25 B 1-12 stages. Movitec V/VS……40/60 B 1-10 stages. Movitec V/VS……90 B 1-6 stages. Movitec V/VS……125 B 1-4 stages. -------------------------------------- Movitec HI/HSI x yy B, Movitec HI/HSI 15 yy C. Where: H = Vertically oriented (AISI 304). HS = Vertically oriented (AISI 316). I = Inner thread connection. x = flow rate m³/h (2, 4, 6, 10 or 15). yy = no. of stages Movitec HI/HSI 2/4/6 B 1-14 stages. Movitec HI/HSI 10 B/15 B/15 C 1-8 stages.

Approval Holder:: KSB Manufacturing B.V.

Company Name
KSB Manufacturing B.V.
Address
Kalkovenweg 13 2401LI Alphen Aan Den Rijn
Country
Netherlands

View All Listings by this Company

WRAS Approval Number: #250404710

Permanent magnet multi-stage centrifugal pump with a plastic body. The product is supplied with brass adaptors and a copper olive to convert to compression. The compression connections are for use with Irish copper pipe (manufactured to EN1057) (27.4mm size) and copper pipe (manufactured to EN1057) (28mm size). Maximum working pressure 8.0 bar. Maximum operating temperature 90°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250404710
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1” BSP (F) (pump body). 27.4mm or 28mm compresson (adaptors).
Marking:: SHIMGE on body
Installation Requirements:: R001 R415
Expiry date:: 30/04/2030
Model:: CA600

Approval Holder:: Shimge Pump Industry (Zhejiang)Co.,Ltd.

Company Name
Shimge Pump Industry (Zhejiang)Co.,Ltd.
Address
No.3 Bihai Street, Eastern New Area, Wenling City, Taizou City Zhejiang Province.
Country
China
Phone
86 17614582624
General Email
pangxiyuan@shimge.com

View All Listings by this Company

WRAS Approval Number: #250404716

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250404716
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1” BSP (F) (pump body). 27.4mm or 28mm compresson (adaptors).
Marking:: Stuart Turner logo - Monsoon Professional, temperature, pressure and serial number on data-plate on body.
Installation Requirements:: R001 R415
Expiry date:: 30/04/2030
Model:: 47729 Monsoon Professional

Approval Holder:: Stuart Turner Ltd

Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

WRAS Approval Number: #250802702

Range of single and twin ended shower booster pumps with plastic bodies and plastic impellers. The inlets/outlets incorporate stainless steel braided EPDM lined flexible hose assemblies with isolation valves and stainless-steel strainers. The outlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The Universal Twin models incorporate an expansion vessel. Maximum working pressure 1.5, 1.8, 2.0, 2.5, 2.6, 3.0 Bar (see model for more details). Maximum operating temperature: 60.0°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250802702
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm, 21mm or 22mm Push fit connections for use with copper pipe EN1057
Marking:: Salamander Pumps logo on body. Salamander Pumps and technical information on adhesive label on body
Installation Requirements:: R001 R150 R415
Expiry date:: 31/08/2030
Model:: CT RANGE: CT50+XTRA 15mm, CT50XTRA 15mm, CT54XTRA 15mm, CT55+XTRA 15mm, CT55XTRA 15mm, CT59XTRA 15mm, CT75+XTRA 15mm, CT75XTRA 15mm, CT79XTRA 15mm, CT85+XTRA 15mm, CT85XTRA 15mm, CT89XTRA 15mm, CT60B 15mm, CT60BU 15mm, CT64HUXTRA 15mm, CT64HXTRA 15mm, CT80B 22mm, CT80BU 22mm, CT84HUXTRA 21mm, CT84HXTRA 21mm, CTFORCE15IPT 21mm, CTFORCE15ITU 21mm, CTFORCE15PT 22mm, CTFORCE15TU 22mm, CTFORCE20IPS 21mm, CTFORCE20IPT 21mm, CTFORCE20ISU 21mm, CTFORCE20ITU 21mm, CTFORCE20PT 22mm, CTFORCE20PS 22mm, CTFORCE20SU 22mm, CTFORCE20TU 22mm, CTFORCE30IPS 21mm, CTFORCE30IPT 21mm, CTFORCE30ISU 21mm, CTFORCE30ITU 21mm, CTFORCE30PS 22mm, CTFORCE30PT 22mm, CTFORCE30SU 22mm, CTFORCE30TU 22mm, ACTFORCE30SU 22mm. KEY: XTRA = Plastic Ended, B = Plastic Ended with Plastic Bypass, H = Plastic Ended with Plastic Bypass (Ireland), FORCE = Brass Ended, A = Manufactured for a separate company. U = Includes expansion vessel, P = No expansion vessel, T= Twin ended pump, S = Single ended pump, I = sold in Ireland, + = supplied with couplers with isolating valves. The XTRA models without a + come with couplers without isolating valves. The rest of the product ranges include isolating valves as standard. 50/54/55/59/15 = 1.5 Bar, 60/64 = 1.8 Bar, 75/79/20 = 2.0 Bar, 85/89 = 2.5 Bar 80/84 = 2.6 Bar, 30 = 3.0 Bar.

Manufacturer:: Salamander Pumps

Company Name
Salamander Pumps
Postcode
SR5 3XE
Country
United Kingdom
Phone
0191 535 4528

View All Listings by this Company

WRAS Approval Number: #250504706

Range of multi-stage semiaxial submersible pumps with stainless steel bodies and impellers. Please note, this approval does not cover the motor, motor connection kit or power cable necessary for the pump to operate. Open outlet use only. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250504706
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 140 SX models: 3” GAS FLANGED outlet conenection, 180 SX models: 5” GAS FLANGED outlet conenection, 230 SX models: 6” GAS FLANGED outlet conenection, 270 SX models: DN200 FLANGED outlet conenection.
Marking:: Panelli logo, model type, serial no., made in Italy, production date (MM/YY) and other techical info on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/05/2030
Proviso:: Open outlet use only.
Model:: 140 SX 34/XX, 140 SX 44/XX, 140 SX 54/XX, 140 SX 64/XX, 180 SX 102/ XX, 180 SX 124/XX, 180 SX 140/XX, 180 SX 78/XX, 180 SX 90/XX, 230 SX 200/XX (DRXX), 230 SX 220/XX (DRXX), 230 SX 240/XX (DRXX), 230 SX 280/XX (DRXX), 270 SX 370/XX (DRXX), 270 SX 440/XX (DRXX) (A). Where: 140-180-230-270 = pump diameter. 140: 6”, 180: 8”, 230: 10”, 270: 12”. SX: Semi-axial pump family. 34-440: Flow. /XX = Number of stages (XX will be replaced by 1 or 2 digits as follows). 140 SX 34: 3 to 27, 140 SX 44: 3 to 22, 140 SX 54: 3 to 22, 140 SX 64: 1 to 18, 180 SX 102: 1 to 15, 180 SX 124: 1 to 13, 180 SX 140: 1 to 12, 180 SX 78: 1 to 19, 180 SX 90: 1 to 17, 230 SX 200: 1 to 9, 230 SX 220: 1 to 7, 230 SX 240: 1 to 7, 230 SX 280: 1 to 7, 270 SX 370: 1 to 5, 270 SX 440: 1 to 5. Optional: DRXX = Impeller diameter reduction in mm. XX can either be 10 or 20. A = Impeller with corner reduction.

Approval Holder:: Panelli S.r.l.

Company Name
Panelli S.r.l.
Address
Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company
Manufacturer:: Panelli S.r.l.

Company Name
Panelli S.r.l.
Address
Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company