'Resichem 507 DWPU Blue & Grey'. Site applied, two-component polyurethane coatings which are available in blue or grey colours (once mixed). Mix Part A (blue or grey opaque liquid) with Part B (amber, translucent liquid) in a 100:30.5 weight ratio and apply as per manufacturer's technical data sheet 'TDS507DWPU.rv4.09062022'. Cure for 14 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2205552

Expiry date:

31/05/2027

Approval Holder:

Resimac Ltd.

Company Name

Resimac Ltd.

Address

Unit B, Park Barn Estate, Station Road, Topcliffe, Thirsk

Postcode

YO7 3SE

View All Listings by this Company

'Crystic LS96PA Clear Gel Coat' for use with 'Crystic 2-446 PA GRP resin'. Contact moulded GRP resin, manufactured by hand lamination, for use with off-white coloured, factory applied gel coat. Apply as per manufacturer's quick guide 'issue number 1', dated 04/06/2018. Cure for 24 hours@23°C and then 3 hours@80°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5120 Glass Reinforced Plastics (GRP)

Section Subtitle:

Components.

WRAS Approval Number:

2205557

Expiry date:

31/05/2027

Approval Holder:

Scott Bader Co. Ltd.

Company Name

Scott Bader Co. Ltd.

Address

Wollaston, Wellingborough, Northamptonshire

Postcode

N29 7RL

Phone

+44 (0) 1933 663100

General Email

info@scottbader.com

View All Listings by this Company

'Purolite C107E'. Cream coloured ion exchange resin. For use with water up to 23°C.

Section:

5150 Ion Exchange Resin

Expiry date:

30/06/2027

Approval Holder:

Purolite Ltd.

Company Name

Purolite Ltd.

Address

Unit D Llantrisant Business Park, Llantrisant, RCT

Postcode

CF72 8LF

Country

Wales

Phone

+44 (0) 1443 229 334

General Email

sales@purolite.com

View All Listings by this Company

'Purolite® C104E/5264'. Cream coloured ion exchange resin. For use with water up to 23°C.

Section:

5150 Ion Exchange Resin

Expiry date:

31/08/2027

Approval Holder:

Purolite Ltd.

Company Name

Purolite Ltd.

Address

Unit D Llantrisant Business Park, Llantrisant, RCT

Postcode

CF72 8LF

Country

Wales

Phone

+44 (0) 1443 229 334

General Email

sales@purolite.com

View All Listings by this Company

'K422'. Clear, silicone lubricant aerosol. Apply as per manufacturer's instructions 'version 1.0' dated 'May 2022'. For use with water up to 85°C.

Section:

5160 Lubricants

Expiry date:

31/05/2027

Approval Holder:

Selden Research Ltd.

Company Name

Selden Research Ltd.

Address

Staden Business Park, Staden Lane, Buxton

Postcode

SK17 9RZ

Country

Derbyshire

Phone

+44 (0) 1298 26226

General Email

info@selden.co.uk

View All Listings by this Company

'Hydro 90'. Clear, silicone lubricant aerosol. Apply as per manufacturer's instructions 'version 1.0' dated 'June 2022'. For use with water up to 85°C.

Section:

5160 Lubricants

Expiry date:

31/05/2027

Approval Holder:

Sarco Stopper Ltd.

Company Name

Sarco Stopper Ltd.

Address

Brocks Way, East Mains Industrial Estate, Broxburn, Nr Edinburgh

Postcode

EH52 5NB

Country

Scotland

Phone

+44 (0) 1506 855824

General Email

mail@sarcostopper.com

View All Listings by this Company

'Molykote® 111 & Molykote® 7508'. Translucent white silicone greases. For use with water up to 85°C.

Section:

5160 Lubricants

Expiry date:

31/08/2027

Approval Holder:

DuPont Specialty Products GmbH

Company Name

DuPont Specialty Products GmbH

Address

Rheingaustr. 34, 65201 Wiesbaden

Country

Germany

View All Listings by this Company

'Ferrimax 10T'. Grey coloured, sintered strontium ferrite magnet. For use with water up to 50°C.

Section:

5165 Magnetic Material

Expiry date:

31/07/2027

Approval Holder:

MPI Magneti Permanenti Industriali Srl.

Company Name

MPI Magneti Permanenti Industriali Srl.

Address

Via G.B. Vico 25/B, 20010 Cornaredo (Milano), Italy

View All Listings by this Company

'KN133G50 (beige coloured) & KN133G50BL (black coloured)'. Injection moulded PA6 materials. For use with water up to 65°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2205541

Expiry date:

31/05/2027

Approval Holder:

Kolon Plastics Inc.

Company Name

Kolon Plastics Inc.

Address

1018 Umgmyung - Dong, Gimcheon, Gyungsangbuk - Do

Country

Korea

View All Listings by this Company

'DH-01 Pipe'. Blue coloured, extruded HDPE pipe. For use with water up to 65°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2207503

Expiry date:

31/07/2027

Approval Holder:

Shandong Donghong Pipe Industry Co., Ltd.

Company Name

Shandong Donghong Pipe Industry Co., Ltd.

Address

No. 1 Donghong Road, Qufu City, Shandong

Country

China

View All Listings by this Company