'Loctite SI 5331 (known as 'Loctite 5331')'. White coloured silicone thread sealant. Apply as per manufacturers technical data sheet ‘reference 1.7’ dated May 2014. Cure for 96 hours@23°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5550 Sealants - Screwed Joints - Silicone

Expiry date:

29/02/2028

Approval Holder:

Henkel Ltd.

Company Name

Henkel Ltd.

Address

Technologies House, Wood Lane End, Hemel Hempstead

Postcode

HP2 4RQ

Country

Herts

Phone

+44 1442 278 100

General Email

loctite.connect@henkel.com

View All Listings by this Company

'Weld-On 719 PVCu Clear Solvent Cement'. Clear, colourless solvent cement. Apply as per manufacturer's instructions and cure/dry for 24 hours@5°C(±2°C). For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5560 Solvent Cements

Expiry date:

31/12/2027

Approval Holder:

IPS Corporation

Company Name

IPS Corporation

Address

445 W. Victoria Street, Compton, California 90220

Country

USA

Phone

(310) 898-3300

General Email

info@ipscorp.com

View All Listings by this Company

‘M930F, M330F, M630F, M730F, M410F & M710F’. Beige coloured, injection moulded polyketone materials. For use with water up to 85°C.

Section:

5585 Thermoplastic Moulding Compound

Expiry date:

31/01/2028

Approval Holder:

Hyosung Chemical Corporation

Company Name

Hyosung Chemical Corporation

Address

Banpo Hyosung Building 18 Floor 235, Banpo-daero, Seochu-gu, Seoul 06578

Country

Korea, Republic of

View All Listings by this Company

Range of wall mounted electric showers (various finishes). The product incorporates a solenoid valve controlling the flow. Maximum working pressure 10.0 bar. Maximum operating temperature 53°C. Cold supply only.

Section:

1361 Heaters

Section Subtitle:

Electric Shower

WRAS Approval Number:

2212342

Note:

This approval does not include a shower hose and handset.

Size:

15mm plastic pipe.

Marking:

Aqualisa logo, model, power rating, pressure, Aqualisa name and address and other technical information on adhesive label on top of body.

Installation Requirements:

R001 R040

Expiry date:

31/12/2027

Model:

SEQD41 (Black Chrome - 8.5KW), SEQD42 (Black Chrome - 9.5KW), SEQD43 (Black Chrome - 10.5KW), SEKD41 (Black Chrome - 8.5KW), SEKD42 (Black Chrome - 9.5KW), SEKD43 (Black Chrome - 10.5KW), SEED41 (Black Chrome - 8.5KW), SEED42 (Black Chrome - 9.5KW), SEED43 (Black Chrome - 10.5KW), VOTZ25 (Satin Silver Trim - 8.5KW), VOTZ26 (Satin Silver Trim - 9.5KW), VOTZ27 (Satin Silver Trim - 10.5KW), VOXZ25 (Satin Silver Trim - 8.5KW), VOXZ26 (Satin Silver Trim - 9.5KW), VOXZ27 (Satin Silver Trim - 10.5KW), VOPZ25 (Satin Silver Trim - 8.5KW), VOPZ26 (Satin Silver Trim - 9.5KW), VOPZ27 (Satin Silver Trim - 10.5KW), MEMN31 (Slate Grey - 8.5KW), MEMN32 (Slate Grey - 9.5KW), MEMN33 (Slate Grey - 10.5KW), MEFN31 (Slate Grey - 8.5KW), MEFN32 (Slate Grey - 9.5KW), MEFN33 (Slate Grey - 10.5KW), MELN31 (Slate Grey - 8.5KW), MELN32 (Slate Grey - 9.5KW), MELN33 (Slate Grey - 10.5KW), MOBC85 (Chrome - 8.5KW), MOBC95 (Chrome - 9.5KW), MOBC105 (Chrome - 10.5KW), MOGC85 (Chrome - 8.5KW), MOGC95 (Chrome - 9.5KW), MOGC105 (Chrome - 10.5KW), MOWC85 (Chrome - 8.5KW), MOWC95 (Chrome - 9.5KW), MOWC105 (Chrome - 10.5KW). Models added August 2023: LMEP8501 Lumi+ electric shower 8.5kW, LMEP9501 Lumi+ electric shower 9.5kW, LMEP10501 Lumi+ electric shower 10.5kW, 707395 LUMI+8.5KW ENGINE, 707396 LUMI+9.5KW ENGINE, 707397 LUMI+10.5KW ENGINE.

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Manufacturer:

Xiamen E-Tec Electric Shower Co., LTD

Company Name

Xiamen E-Tec Electric Shower Co., LTD

Address

No.11, HaiJing East 2nd Road, Xiamen Area of China (Fujian) Pilot Free Trade Zone.

General Email

View All Listings by this Company

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass bodies). Flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled via a manual operating single lever on body. The inlets hose incorporates stainless steel strainer and an approved check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection). The spout outlet incorporates a plastic aerator and the product is supplied with metal backnuts. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

2301014

Size:

Stainless steel braided PEX lined flexible hose assemblies with 3/8" BSP captive nut end connections.

Marking:

Stern on top of tap body

Installation Requirements:

R001 R009 R006 R010

Expiry date:

31/01/2028

Model:

239250 – Trendy 1000 Plus B 239350 - Trendy 1000 Plus E 239260 - Trendy 1000 Plus LB 239360 - Trendy 1000 Plus LE 239251 - Trendy 1000 Plus B AB 1953 239351 - Trendy 1000 Plus E AB 1953 239261 - Trendy 1000 Plus LB AB 1953 239361 - Trendy 1000 Plus LE AB 1953

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company