Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Models with compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250404006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN8 bore diameter hose with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 20= M10*(12‐110) with single O‐ring or double O-ring 21= M11*(12‐110) with single O‐ring or double O-ring 22= M12*(12‐110) with single O‐ring or double O-ring 23= M14*(12‐110) with single O‐ring or double O-ring 24= M15*(12‐110) with single O‐ring or double O-ring 25= M16*(12‐110) with single O‐ring or double O-ring 26= F15 27= 15mm smooth tube 31= 15mm compression fitting 35= 10mm pushfit 38= 22mm pushfit 39= 10mm pushfit isolation valve 41= 15mm pushfit isolation valve 42= 22mm pushfit isolation valve DN10 bore diameter hose with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 16= F1 17= F1 elbow 18= M1 20= M10*(12‐110) with single O‐ring or double O-ring 21= M11*(12‐110) with single O‐ring or double O-ring 22= M12*(12‐110) with single O‐ring or double O-ring 23= M14*(12‐110) with single O‐ring or double O-ring 24= M15*(12‐110) with single O‐ring or double O-ring 25= M16*(12‐110) with single O‐ring or double O-ring 27= 15mm smooth tube 28= 22mm smooth tube 31= 15mm compression fitting 35= 10mm pushfit 38= 22mm pushfit 39= 10mm pushfit isolation valve 41= 15mm pushfit isolation valve 42= 22mm pushfit isolation valve DN13 bore diameter hose with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 16= F1 17= F1 elbow 18= M1 24= M15*(12‐110) with single O‐ring or double O-ring 25= M16*(12‐110) with single O‐ring or double O-ring 27= 15mm smooth tube 28= 22mm smooth tube 31= 15mm compression fitting 38= 22mm pushfit 41= 15mm pushfit isolation valve 42= 22mm pushfit isolation valve DN19 bore diameter hose with the following end connections: 13= F3/4 14= F3/4 elbow 15= M3/4 16= F1 17= F1 elbow 18= M1 28= 22mm smooth tube 38= 22mm pushfit 42= 22mm pushfit isolation valve

Marking:

Justlink, WRAS, ‘it’ and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

JL – A*B – XX – D – E – XXX A*B denotes connection size and type and is replaced with a two digit number (please refer to size). XX denotes bore diameter of hose and is replaced with a two digit number (please refer to size). D denotes the outer braided material and is replaced with: SS = stainless steel wire, SN = stainless steel wire plus black nylon wire, N = Nylon wire. E denotes the liner material and is replaced with 1 for EPDM. XXX denotes the length of the hose between 15cm & 200cm and is replaced with a number.

Approval Holder:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road Yuhuan Economic Development Zone Yuhuan

Postcode

317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company