Directory Search Results

Print List

#2012366

Electronically controlled heat interface units (HIU) with twin stainless-steel plate heat exchangers providing space heating and instantaneous hot water. The cold inlet supply to the plate heat exchanger incorporates an isolation valve and a water hammer arrestor. The space heating circuit incorporates an expansion vessel and a pressure relief valve (set at 3.0 bar). The product is supplied with a filling loop assembly consisting of an elbow shaped copper pipe, isolation valve and double check valve assembly (suitable for backflow protection against fluid category 3) which incorporates an isolation valve. The cold mains inlet and the domestic hot water outlet each incorporate a brass bodied spherical valve with a butterfly handle. Maximum working pressures and operating temperatures: Primary: 16.0 bar and 90˚C. Domestic hot water (DHW): 10 bar and 65˚C. Secondary (space heating): 2.5 bar and 85˚C.

Section:
1350 Heat Exchangers
Size:
¾” BSP (M)
Marking:
RBM, address, serial number, technical & pressure information on label inside case.
Installation Requirements:
R001
Expiry date:
31/12/2025
Proviso:
Supplied with a temporary filling loop. The filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999.
Model:
37370000 ELECTRONICALLY CONTROLLED HEAT INTERFACE UNITS
Product Images

Approval Holder:
RBM S.p.a.
Company Name
RBM S.p.a.
Address
Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)
Country
Italy

View All Listings by this Company

Print This Approval


#2105309

Copper heat transformer. Maximum working pressure 11.0 bar. Maximum operating temperature 95°C.

Section:
1350 Heat Exchangers
Size:
76mm copper tube
Marking:
Company name and address, model, operating parameters, size & date of manufacture (MM/YYYY) on body.
Installation Requirements:
R001
Expiry date:
31/05/2026
Model:
Heat Transformer 60
Product Images

Approval Holder:
Copper Industries Ltd
Company Name
Copper Industries Ltd
Address
Toome Business Park 21 Hillhead Road Toome Co Antrim
Postcode
BT41 3SF
Country
United Kingdom
Phone
02879 659736
General Email
mail@copperindustries.co.uk

View All Listings by this Company
Manufacturer:
Copper Industries Ltd
Company Name
Copper Industries Ltd
Address
Toome Business Park 21 Hillhead Road Toome Co Antrim
Postcode
BT41 3SF
Country
United Kingdom
Phone
02879 659736
General Email
mail@copperindustries.co.uk

View All Listings by this Company

Print This Approval


#2107804

Ranges of wall hung, gas-fired condensing combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system incorporating an expansion vessel and pressure relief valve set at 3.0 bar. The supplies to both domestic hot water and primary are controlled via spherical valves. Products are supplied with a rigid filling loop or keyless filling link. Maximum working pressure of the primary circuit is 2.5 bar & maximum supply pressure of the secondary circuit is 8.0 bar. Cold water supply only. Maximum operating temperature 95°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2107804
Note:
The rigid filling loop assembly incorporates a double check valve assembly (verified by test as suitable for backflow protection against fluid category 3). The keyless filling link incorporates a CAB backflow prevention device (verified by test as suitable for backflow protection against fluid category 3). The discharge from the relief outlet port of this device must be made via a type AA, AB or AD air gap, or in accordance with EN 1717.
Size:
Primary: 28mm compression. Secondary: 15mm compression.
Marking:
Baxi on front of boiler.
Installation Requirements:
R001 R140 R360
Expiry date:
31/07/2026
Model:
Baxi 224 Combi (product code 7656160). Baxi 228 Combi (7656161). Baxi 424 Combi (7656162). Baxi 428 Combi (7656163). Baxi 428 Combi LPG (7676760).

Approval Holder:
Baxi Heating UK Ltd.
Company Name
Baxi Heating UK Ltd.
Address
Club Street Bamber Bridge Preston Lancaster
Postcode
PR5 6FN

View All Listings by this Company
Manufacturer:
Baxi Spa
Company Name
Baxi Spa
Address
Via Trozzetti 20 36061 Bassano del Grappa (VI)
Country
Italy
Phone
Tel: +39 0424 517 111 Fax: +39 0424 38089

View All Listings by this Company

Print This Approval


#2106700

Q4000 range of water meters incorporating stainless steel bodies, FKM rubber gasket and grey epoxy resin liner. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1505 Water Meters
Size:
DN50 - DN300.
Marking:
Honeywell on cap and meter face. Flow arrow on body. Model, DN, CE, max pressure and other info on adhesive label on body.
Installation Requirements:
R001
Expiry date:
30/06/2026
Model:
Q4000

Approval Holder:
Elster Water Metering Limited
Company Name
Elster Water Metering Limited
Address
130 Camford Way Sundon Park Luton
Postcode
LU3 3AN
Country
United Kingdom
Phone
01582 846 400
General Email
matthew.ward@honeywell.com

View All Listings by this Company
Manufacturer:
Elster Water Metering Limited
Company Name
Elster Water Metering Limited
Address
130 Camford Way Sundon Park Luton
Postcode
LU3 3AN
Country
United Kingdom
Phone
01582 846 400
General Email
matthew.ward@honeywell.com

View All Listings by this Company

Print This Approval


#2101060

Screw down pattern, angled solation valve with a dome type operating member, DZR brass body and an EPDM gasket and ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
Size:
½” BSP (M) x ⅜” BSP (M).
Marking:
FANSKI and DR on body.
Installation Requirements:
R001
Expiry date:
31/01/2026
Model:
AP145

Approval Holder:
Fanski Group Inc
Company Name
Fanski Group Inc
Address
NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600
Country
China

View All Listings by this Company
Manufacturer:
Fanski Group Inc
Company Name
Fanski Group Inc
Address
NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600
Country
China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 268 of 2242

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.