Range of three-hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes). Incorporating a ceramic cartridge headwork with a single lever operating member and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts Maximum working pressure 10.0 Bar. Maximum operating temperature 60 °C

Section:

0655 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

241002045

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The products are supplied with a shower hose and handset Product 71 730 xx0 to be installed in combination with 13437180 Basic set for 3-hole rim mounted single lever bath mixer (WRAS 2303055). Product 71 731 xx0 to be installed in combination with 13439180 Basic set for 3-hole rim mounted single lever bath mixer (WRAS 2311033).

Size:

½” BSP (M)

Marking:

Hansgrohe on spout and operating member

Installation Requirements:

R001 R006 R007 R030

Expiry date:

31/10/2029

Model:

71 730 xxx Hansgrohe Talis E 3-hole rim mounted bath mixer 71 731 xxx Hansgrohe Talis E 3-hole rim mounted bath mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of wall mounted or floor standing spout outlets (fixed or swivel - see model in various finishes). All models incorporate a plastic flow straightener, except for the 93-Floor Mounted Bath Filler which has a plastic aerator.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2303079

Note:

Open outlet use only.

Size:

½” BSP (F).

Marking:

ABI on tab base

Installation Requirements:

R001 R040

Expiry date:

31/03/2028

Model:

Floor Mounted Bath Filler 12126 – Matte Black 12128 – Brushed Brass 12127 – Brushed Nickel 12125 - Chrome 12130 – Brushed Copper 12131 - White 12129 – Brushed Gunmetal Wall Mounted Spout 15386 – Brushed Nickel 15388 – Matte Black 15385 – Brushed Gunmetal 16704 – Tumbled Aged Brass 15383 – Brushed Brass 15384 – Brushed Copper 11666 - White 15387 - Chrome Mini Wall Mounted Spout 15379 – Brushed Nickel 15381 – Matte Black 15376 – Brushed Brass 12292 – Brushed Copper 15380 - Chrome 12293 - White 12291 – Brushed Gunmetal Kingsley Wall Mounted Spout 15367 - Chrome 14654 – Matte Black 15366 – Brushed Nickel 15365 – Brushed Brass 16929 – Brushed Copper

Approval Holder:

ABI INTERIORS PTY LTD

Company Name

ABI INTERIORS PTY LTD

Address

316 DESIGN CENTRE EAST LONDON

Postcode

SW10 0XE

View All Listings by this Company

Range of deck mounted spout outlets (fixed or swivel - see model, Various finishes) incorporating a plastic flow straightener. The products are supplied with metal backnuts.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2303080

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

ABI ON TAP BODY

Installation Requirements:

R001 R006

Expiry date:

31/03/2028

Model:

Kingsley Mini Hob Spout 15362 – Brushed Nickel 15363 - Chrome 14650 – Matte Black 15361 – Brushed Brass 16930 – Brushed Copper Kingsley Gooseneck Swivel Hob Spout 16931 – Brushed Copper 15358 – Brushed Nickel 15359 - Chrome 15357 – Brushed Brass 15360 – Matte Black

Approval Holder:

ABI INTERIORS PTY LTD

Company Name

ABI INTERIORS PTY LTD

Address

316 DESIGN CENTRE EAST LONDON

Postcode

SW10 0XE

View All Listings by this Company

Range of chemical dosing equipment which incorporate self-closing valves within a plastic body. The outlet of the injector incorporates a connection for injection of chemicals via venturi action. Maximum working pressure 6.0 bar. Maximum operating temperature 60ºC.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

240904725

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Only suitable for use with chemicals that are no greater than a Fluid Category 3 risk.

Size:

¾” BSP (M) ¾” BSP (F)

Marking:

SEKO, model and technical information on adhesive label on case.

Installation Requirements:

R001 R040 R160 R415

Expiry date:

30/09/2029

Model:

QX1B100F PROFLEX 1LF BUT QX1S100F PROFLEX 1LF SLID QX1B300F PROFLEX 1HF BUT QX1S300F PROFLEX 1HF SLID QX2B1B3F PROFLEX 2LF+2HF BUT QX2S1S3F PROFLEX 2LF+2HF SLID QX3B1B3F PROFLEX 3LF+1HF BUT QX3S1S3F PROFLEX 3LF+1HF SLID QX3B3B1F PROFLEX 3HF+1LF BUT QX3S3S1F PROFLEX 3HF+1LF SLID QX4B100F PROFLEX 4LF BUT QX4S100F PROFLEX 4LF SLID QX4B300F PROFLEX 4HF BUT QX4S300F PROFLEX 4HF SLID LX1B100F LDS 1LF BUT LX1S100F LDS 1LF SLID LX1B1S0F LDS 1LF BUT/SLID LX1B300F LDS 1HF BUT LX1S300F LDS 1HF SLID LX1B3S0F LDS 1HF BUT/SLID LX2B1B3F LDS 2LF + 2HF BUT LX2S1S3F LDS 2LF + 2HF SLID LX2S1B3F LDS 2LF + 2HF SLID/BUT LX3B1B3F LDS 3LF + 1HF BUT LX3S1S3F LDS 3LF + 1HF SLID LX3S1B3F LDS 3LF + 1HF SLID/BUT LX3B3B1F LDS 3HF + 1LF BUT LX3S3S1F LDS 3HF + 1LF SLID LX3B3S1F LDS 3HF + 1LF BUT/SLID LX4B100F LDS 4LF BUT LX4S100F LDS 4LF SLID LX4B1S0F LDS 4LF BUT/SLID LX4B300F LDS 4HF BUT LX4S300F LDS 4HF SLID LX4B3S0F LDS 4HF BUT/SLID GX1B100F LS 1LF BUT GX1S100F LS 1LF SLID GX1B1S0F LS 1LF BUT/SLID GX1B300F LS 1HF BUT GX1S300F LS 1HF SLID GX1B3S0F LS 1HF BUT/SLID GX2B1B3F LS 2LF + 2HF BUT GX2S1S3F LS 2LF + 2HF SLID GX2S1B3F LS 2LF + 2HF SLID/BUT GX3B1B3F LS 3LF + 1HF BUT GX3S1S3F LS 3LF + 1HF SLID GX3S1B3F LS 3LF + 1HF SLID/BUT GX3B3B1F LS 3HF + 1LF BUT GX3S3S1F LS 3HF + 1LF SLID GX3B3S1F LS 3HF + 1LF BUT/SLID GX4B100F LS 4LF BUT GX4S100F LS 4LF SLID GX4B1S0F LS 4LF BUT/SLID GX4B300F LS 4HF BUT GX4S300F LS 4HF SLID GX4B3S0F LS 4HF BUT/SLID

Approval Holder:

SEKO SpA

Company Name

SEKO SpA

Address

Via Salaria KM 92, 200 02010 S.Sufina (RI) Italy

View All Listings by this Company

Range of filter cartridges. Maximum working pressure 8.0 Bar. Cold water use only.

Section:

1055 Filter Cartridges

Size:

¾” BSP (M)

Marking:

Franke and product info on body

Installation Requirements:

R001 R008 R120 R170

Expiry date:

28/02/2029

Model:

Franke Coffeewater A30 Franke Coffeewater A40 Franke Coffeewater A50 Franke Coffeewater A60 Franke Coffeewater A80 Franke Coffeewater Protect B60 Franke Coffeewater Protect B80 Franke Coffeewater Premium C60

Approval Holder:

Franke Holding AG

Company Name

Franke Holding AG

Address

Franke-Strasse 2 PO Box 230 4663 Aarburg

Country

Switzerland

View All Listings by this Company