Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2106047

Range OF JLA commercial washing machines with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with three ¾” x ¾” BSP (F) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet prior to a HDPE inlet hose with ¾” x ¾” captive nut end connections. Maximum working pressure 5.7 Bar. Maximum operating temperature 60°C.

Section:: 2370 Washing Machines
Section Subtitle:: Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:: 2106047
Note:: This appliance incorporates a Fluid Category 5 backflow prevention device. The double check valve assemblies supplied with this product must be installed on all available inlets to maintain the validity of the WRAS approval. No detergents, softeners or other products are to be placed within the dispenser compartment that represent a risk greater than Fluid Category 3.
Size:: ¾” BSP (F) (to double check valve assembly)
Marking:: JLA logo, model, serial number, product info on label on back panel.
Installation Requirements:: R001 R160 R574
Expiry date:: 30/06/2026
Model:: JLA20 JLA30 JLA40 JLA60

Product Images

Approval Holder:: JLA Ltd

Company Name
JLA Ltd
Address
Meadowcroft Lane Ripponden West Yorkshire
Postcode
HX6 4AJ
Country
Ripponden

View All Listings by this Company

WRAS Approval Number: #2109354

Range of commercial front loading, hood type & utensil washer type dishwashing machines with flow controlled by solenoid and discharged via type AB air gap (verified by test - suitable for backflow protection against fluid category 5) . The products are supplied with a grey coloured PVC supply hose. Maximum working pressure 6.0 bar. Maximum operating temperature 90°C.

Section:: 2390 Washing Machines
Section Subtitle:: Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:: 2109354
Size:: ¾” BSP Captive nut.
Marking:: Hobart, manufacturers address, model no, serial no and other technical information on front casing.
Installation Requirements:: R001 R009 R520 R574
Expiry date:: 30/09/2026
Model:: Frond loading: Design State: FG-16-01 Device Code: G404W-12B, G404SW-12B, G504W-10B, G504SW-10B, F504W-20B, F504SW-20B Design State: GCB-13-04 Device Code: ECO+G415W-10C, ECO+G415SW-10C Design State: GC-18-01 Device Code: GCW-10B, GCSW-20B, GCROIW-10B, GCPW-10B, GCPROIW-10B, GPW-10B, GPSW-10B, GPCROIW-10B Design State: FXB-12-04 Device Code: ECO+G515W-10C, ECO+G515SW-10C, ECO+F515W-10C, ECO+F515SW-10C Design State: FX-18-01 Device Code: FXW-10B, FXSW-10B, FXLW-10B, FXLSW-10B, FXSTDW-10B, careSW-10B, FPW-10B, FPSW-10B, GXCW-11B, GXCSW-11B, GXCROIW-11B, GXW-11B, GXSW-11B Hood type: Design State: AM-14-02 Device Code: H604W-12B, H604SW-12B Design State: AMB-14-03 Device Code: ECO+H615W-10C, ECO+H615SW-10C Design State: AMX-14-02 Device Code: AM900W-10B, AM900SW-10B, , AMXW-10B, AMXSW-10B ,AMXRW-10B, AMXRSW-10B, AMXXW-10B, AMXXSW-10B, AMXXRW-10B, AMXXRSW-10B, AUPW-10B, AUPSW-10B, AUPRSW-10B, AMXTW-10B, AUPTW-10B, AMXXLW-10B, AMXXLSW-10B, AUPLW-10B, AUPLSW-10B, Design State: TLW-18-01: Device Code: TLWW-10A, TLWSW-10A Utensil washer: Design State: UX-15-01 Device Code: UX-10A, UXS-10A, UXC-10A, UXCS-10A, UXRC-10A, UXRCS-10A, UXT-10A, UXTC-10A, UXTRC-10A, UXTH-10A, UXTLH-10A, UXTHR-10A, UXTLHR-10A, UP-10A, UPC-10A, UPRC-10A, UPT-10A, UPTC-10A, UPTRC-10A Design State: U-15-01 Device Code: ECOMAX702-11A, ECOMAX702W-11A Models added June 2022: Frond loading Design State: FXB-12-04 Device Code: FXBSW-10C, FXBSW-15C, FXBW-10C, FXLBSW-10C, GXBSW-11C, GXCBSW-11C Hood type Design State: AMB-14-03 Device Code: AMXBSW-10C, AMXBW-10C, AMXXBRSW-10C Utensil washer Design State: UXB-15-01 Device Code: UXB-10C, UXBS-10C, UXTB-10C, UXTHB-10C, UXTLHB-10C Explanation: “Design State” defines the type of Machine and the Production-Generation “Device Code” defines the Order Code for a special equipped machine

Product Images

Approval Holder:: Hobart GmbH

Company Name
Hobart GmbH
Address
Robert-Bosch-Str. 17 77656 Offenburg
Country
Germany
Phone
+49 781 600-0
General Email
info@hobart.de

View All Listings by this Company
Manufacturer:: Hobart GmbH

Company Name
Hobart GmbH
Address
Robert-Bosch-Str. 17 77656 Offenburg
Country
Germany
Phone
+49 781 600-0
General Email
info@hobart.de

View All Listings by this Company

WRAS Approval Number: #2107005

Range of electrolytic scale inhibitors incorporating copper bodies. For use with copper pipe complying with BS EN 1057. Maximum working pressure 10.0 bar. Maximum operating temperature 40°C.

Section:: 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:: Please refer to model.
Marking:: GAOBO and WRAS on body.
Installation Requirements:: R001 R120 R150 R170 R290
Expiry date:: 31/07/2026
Model:: 7568230011: 15mm push-fit. 7568260011: 15mm push-fit. 7568320011: 15mm push-fit. 7568192211: 15mm compression. 7568156211: 22mm compression. 7568202211: 14.7mm compression. 7568175211: 21.15mm compression.

Product Images

Approval Holder:: Zhejiang Gaobo Sanitary Wares Co Ltd

Company Name
Zhejiang Gaobo Sanitary Wares Co Ltd
Address
Xiaqiu, Yuhuan Sci-Tech Industrial Area, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:: Zhejiang Gaobo Sanitary Wares Co Ltd

Company Name
Zhejiang Gaobo Sanitary Wares Co Ltd
Address
Xiaqiu, Yuhuan Sci-Tech Industrial Area, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2110014

`Hy-MAG` range of electromagnetic water conditioners with blue PTFE coated bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:: 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:: See model.
Marking:: HY-MAG on body. HY-MAG, temperature, pressure, model, serial number and other technical information on adhesive label on body.
Installation Requirements:: R001 R120 R150 R170
Expiry date:: 31/10/2026
Model:: HY-MAG DN15: ½” BSP (F). HY-MAG DN20: ¾” BSP (F). HY-MAG DN25: 1” BSP (F). HY-MAG DN32: 1 ¼” BSP (F). HY-MAG DN40: 1 ½” BSP (F). HY-MAG DN50: 2” BSP (F). HY-MAG DN65: 2 ½” BSP (F). HY-MAG DN100: 100mm flanged.

Product Images

Approval Holder:: Hydrotec International Water Treatment Limited

Company Name
Hydrotec International Water Treatment Limited
Address
38 Main Street Swords Country Dublin
Country
Ireland

View All Listings by this Company

WRAS Approval Number: #2109335

Range of UV disinfection units with stainless steel and EPDM seals. The UV lamps are housed inside synthetic quartz tubes Maximum working pressure 6.9 bar. Cold water use only.

Section:: 2411 Disinfection Equipment
Size:: see model
Marking:: Acuva logo, Acuva Technologies Inc. model, date of manufacture (YYWW) and technical info on body.
Installation Requirements:: R001 R120 R150 R170 R290
Expiry date:: 30/09/2026
Model:: Strike I: 3/8” pushfit inlet x ¼” pushfit outlet. Strike II: ¼” pushfit inlet & outlet.

Product Images

Approval Holder:: Acuva Technologies Inc.

Company Name
Acuva Technologies Inc.
Address
UNIT 1-3771 NORTH FRASER WAY BURNABY BCV5J 5G5
Country
Canada
General Email
eespida@acuvatech.com

View All Listings by this Company
Manufacturer:: Acuva Technologies Inc.

Company Name
Acuva Technologies Inc.
Address
UNIT 1-3771 NORTH FRASER WAY BURNABY BCV5J 5G5
Country
Canada
General Email
eespida@acuvatech.com

View All Listings by this Company