Bath spout with brass body (chromium plated). The outlet incorporates a plastic aerator. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2101325

Size:

½” BSP (M).

Marking:

Kohler on body

Installation Requirements:

R001 R040

Expiry date:

31/01/2026

Model:

23512W-CP – bath spout

Product Images

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of free-standing sanitary macerating disposal units. The units are fed via a flexible hose assembly. Flow is controlled by a solenoid valve and discharges via a type `AA` air gap. Maximum working pressure 10.0 bar. Cold water use only.

Section:

0950 Disposal Units

WRAS Approval Number:

2107802

Size:

Nylon bradied TPE lined flexible hose assembly with ¾” BSP captive nuts.

Marking:

Haigh, model & technical information on adhesive label on side panel. Haigh on adhesive label on operating member.

Installation Requirements:

R001 R009

Expiry date:

31/07/2026

Model:

Classic+, Panaway & Incomaster

Approval Holder:

The Haigh Engineering Company Limited

Company Name

The Haigh Engineering Company Limited

Address

Alton Road Ross-on-Wye Herefordshire

Country

HR9 5NG

General Email

STHURLOW@HAIGH.CO.UK

View All Listings by this Company

Manufacturer:

The Haigh Engineering Company Limited

Company Name

The Haigh Engineering Company Limited

Address

Alton Road Ross-on-Wye Herefordshire

Country

HR9 5NG

General Email

STHURLOW@HAIGH.CO.UK

View All Listings by this Company

Range of chemical dosing equipment which incorporate self-closing valves with a plastic body. The outlet of the injector incorporates a connection for injection of chemicals via venturi action. Maximum working pressure 9.0 bar. Maximum operating temperature – 60ºC

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2012065

Size:

¾” BSP male inlet

Marking:

SEKO, max pressure, max temperature and other technical info on label on housing.

Installation Requirements:

R001 R160

Expiry date:

31/12/2025

Model:

PXB1F04 PROMAX BUTTON FLEX-GAP 4L/MINPRODUCT PXB1F16 PROMAX BUTTON FLEX-GAP 14L/MINPRODUCT PXB1F30 PROMAX BUTTON FLEX-GAP 30L/MINPRODUCT PXB4F04 PROMAX BUTTON FLEX-GAP 4L/MINPRODUCT PXB4F16 PROMAX BUTTON FLEX-GAP 14L/MINPRODUCT PXB4F30 PROMAX BUTTON FLEX-GAP 30L/MINPRODUCT PXS1F04 PROMAX SLIDE FLEX-GAP 4L/MINPRODUCT PXS1F16 PROMAX SLIDE FLEX-GAP 14L/MINPRODUCT PXS1F30 PROMAX SLIDE FLEX-GAP 30L/MINPRODUCT PXS4F04 PROMAX SLIDE FLEX-GAP 4L/MINPRODUCT PXS4F16 PROMAX SLIDE FLEX-GAP 14L/MINPRODUCT PXS4F30 PROMAX SLIDE FLEX-GAP 30L/MINPRODUCT

Product Images

Approval Holder:

SEKO SpA

Company Name

SEKO SpA

Address

Via Salaria KM 92, 200 02010 S.Sufina (RI) Italy

View All Listings by this Company

Easyzon range of chemical blenders, consisting of a reaction chamber and pressure reducing valve inlet arrangement only. Maximum working pressure 8.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2010093

Size:

½” BSP (F)

Marking:

LUTZ JESCO ON LABEL ON BODY

Installation Requirements:

R001 R008 R120 R160 R170 R415 R575

Expiry date:

31/10/2025

Model:

LJED5/230 EASYZON D 5G/H SYSTEM, LJED10/230 EASYZON D 10G/H SYSTEM, LJED20/230 EASYZON D 20G/H SYSTEM & LJED40/230 EASYZON D 40G/H SYSTEM DOSING EQUIPMENT

Approval Holder:

LUTZ-JESCO GB LTD

Company Name

LUTZ-JESCO GB LTD

Address

UNIT C1, LOADES ECOPARC BLACKHORSE ROAD COVENTRY

Postcode

CV7 9FW

General Email

tosh.singh@lutz-jesco.com

View All Listings by this Company

FloFit range of push fit fittings (polybutylene body) for use with Qual-Pex Barrier Pipe, Qual-PB polybutylene barrier pipe or copper tube. Above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101806

Size:

see model

Marking:

FloFit+ on body of fitting. Kitemark and size on collet of fitting.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Straight Coupling: FC10 – 10mm FC15 – 15mm FC22 – 22mm FC28 – 28mm Reducing Coupling: FRC15 – 15mm x 10mm FRC22 – 22mm x 15mm Straight Stem Reducer: FSR1015 – 10mm x 15mm FSR1522 – 15mm x 22mm FSR1528 – 15mm x 28mm FSR2228 – 22mm x 28mm 90° Elbow: FB10 – 10mm FB15 – 15mm FB22 – 22mm FB28 – 28mm Equal Tee: FT10 – 10mm FT15 – 15mm FT22 – 22mm FT28 – 28mm Reducing Tee: FRT151010 – 15mm x 10mm x 10mm FRT151510 – 15mm x 15mm x 10mm FRT151522 – 15mm x 15mm x 22mm FRT221515 – 22mm x 15mm x 15mm FRT221522 – 22mm x 15mm x 22mm FRT222210 – 22mm x 22mm x 10mm FRT222215 – 22mm x 22mm x 15mm FRT282222 – 28mm x 22mm x 22mm FRT282228 – 28mm x 22mm x 28mm FRT282815 – 28mm x 28mm x 15mm FRT282822 – 28mm x 28mm x 22mm FRT222228 – 22mm x 22mm x 28mm Stem Elbow: FS10 – 10mm FS15 – 15mm FS22 – 22mm Stop End: FE10 – 10mm FE15 – 15mm FE22 – 22mm FE28 – 28mm Outlets Socket/Socket Manifold: FM15410SK/SK – 15mm Pipe x 4 – 10mm FM15410SK/SP – 15mm Pipe x 4 – 10mm FM15210SK/SK – 15mm Pipe x 2 – 10mm FM15210SK/SP – 15mm Pipe x 2 – 10mm FM22410SK/SK – 22mm Pipe x 4 – 10mm FM22410SK/SP – 22mm Pipe x 4 – 10mm FM22210SK/SK – 22mm Pipe x 2 – 10mm FM22210SK/SP – 22mm Pipe x 2 – 10mm FM22415SK/SK – 22mm Pipe x 4 – 15mm FM22415SK/SP – 22mm Pipe x 4 – 15mm FM22215SK/SK – 22mm Pipe x 2 – 15mm FM22215SK/SP – 22mm Pipe x 2 – 15mm Straight Tap Connector: FTC1512 – 15mm x ½” FTC1534 – 15mm x ¾” FTC2234 – 22mm x ¾” Bent Tap Connector: FBC1512 – 15mm x ½” Blue Collet Clip (Cold Water Use): FCB10 – 10mm FCB15 – 15mm FCB22 – 22mm FCB28 – 28mm Red Collet Clip (Hot Water Use): FCR10 – 10mm FCR15 – 15mm FCR22 – 22mm FCR28 – 28mm Blue Polybutylene Pipe Insert: FPI10 – 10mm FPI15 – 15mm FPI22 – 22mm FPI28 – 28mm White PE-X Pipe Insert: FXI10 – 10mm FXI15 – 15mm FXI22 – 22mm FXI28 – 28mm

Approval Holder:

FloPlast Ltd

Company Name

FloPlast Ltd

Address

Eurolink Business Park Castle road Sittingbourne

Postcode

ME20 3FP

Country

United Kingdom

Phone

01795431731

General Email

henyb@floplast.co.uk

View All Listings by this Company

Manufacturer:

FloPlast Ltd

Company Name

FloPlast Ltd

Address

Eurolink Business Park Castle road Sittingbourne

Postcode

ME20 3FP

Country

United Kingdom

Phone

01795431731

General Email

henyb@floplast.co.uk

View All Listings by this Company