Directory Search Results

Print List

#2101006

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (brass body with various finishes) incorporating quarter turn ceramic disc headworks with cross top type operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2101006
Size:
½” BSP (F)
Marking:
AXOR on spout
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2026
Model:
10 303 180 Basic set for 3-hole wall mixer for concealed installation, which must be installed in conjunction with the following models: 36 107 xxx AXOR Citterio E3-hole basin mixer for concealed installation wall-mounted with spout 220 mm and escutcheons, 36 115 xxx AXOR Citterio E3-hole basin mixer for concealed installation wall-mounted with spout 220 mm. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2010062

Range of wall mounted, concealed, three hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes, see model). Incorporating a ceramic cartridge headwork with single lever operating member and a self-cancelling diverter, diverting the flow between the shower outlet and the bath outlet. The spout outlet incorporates a flow straightener and Incorporates approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also supplied with shower handset and hose. Handset incorporates a flow regulator. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0655 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2010062
Size:
3/4" BSP (M) (Spout). M58 (Headworks) for insertion into specifically dimensional body
Marking:
Samuel Heath etched on wall plate or on escutcheon if no wall plate is supplied.
Installation Requirements:
R001 R030
Expiry date:
31/10/2025
Model:
V7K43-XX With Wall Plate: V7K43-1LF-XX Pure3 Hole Wall Mounted Bath Filler Kit (Including V759-LF-XX Landmark - Pure - lever) V7K43-2LF-XX Pure 3 Hole Wall Mounted Bath Filler Kit (Including V759-LF-XX Landmark - Pure - lever) V7K43-1LK-XX Industrial 3 Hole Wall Mounted Bath Filler Kit (Including V759-LK-XX Landmark - Industrial - lever) V7K43-2LK-XX Industrial 3 Hole Wall Mounted Bath Filler Kit (Including V759-LK-XX Landmark - Industrial - lever) Without Wall Plate: V7K43-1LFNP-XX Pure3 Hole Wall Mounted Bath Filler Kit (Including V759-LF-XX Landmark - Pure - lever) V7K43-2LFNP-XX Pure 3 Hole Wall Mounted Bath Filler Kit (Including V759-LF-XX Landmark - Pure - lever) V7K43-1LKNP-XX Industrial 3 Hole Wall Mounted Bath Filler Kit (Including V759-LK-XX Landmark - Industrial - lever) V7K43-2LKNP-XX Industrial 3 Hole Wall Mounted Bath Filler Kit (Including V759-LK-XX Landmark - Industrial - lever) Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Product Images

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#2011002

Range of four-hole, single outlet (fixed) combination tap assemblies (various finishes), incorporating quarter turn ceramic disc headworks with single lever or cross top operating members and a self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic aerator. The products are supplied with a shower hose and the hose connector incorporates approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Not supplied with a shower handset. Maximum working pressure 5.0 bar Maximum operating temperature 60°C

Section:
0680 Combination Tap Assemblies
Section Subtitle:
Multi hole tap(s) with a single outlet and a swivel spout , incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3).
WRAS Approval Number:
2011002
Size:
¾” BSP (M)
Marking:
SHS on underside of operating member.
Installation Requirements:
R001 R006 R030
Expiry date:
30/11/2025
Model:
V648 / V649 Without Controller V648-XX Deck Mounted 4 Hole Bath Filler - Style Moderne With Controller V6K48M-XX Deck Mounted 4 Hole Bath Filler - Style Moderne - Metal Lever V6K48MB-XX Deck Mounted 4 Hole Bath Filler - Style Moderne - Metal Lever Black V6K48X-XX Deck Mounted 4 Hole Bath Filler - Style Moderne - Cross Top V6K48XB-XX Deck Mounted 4 Hole Bath Filler - Style Moderne - Cross Top Black Without Controller V649-XX Deck Mounted 4 Hole Bath Filler - Style Moderne With Controller V6K49M-XX Deck Mounted 4 Hole Bath Filler - Style Moderne - Metal Lever V6K49MB-XX Deck Mounted 4 Hole Bath Filler - Style Moderne - Metal Lever Black V6K49X-XX Deck Mounted 4 Hole Bath Filler - Style Moderne - Cross Top V6K49XB-XX Deck Mounted 4 Hole Bath Filler - Style Moderne - Cross Top Black Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Product Images

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#2007038

Ranges of combined bath filler and overflow waste assembly incorporating a cable operated pop-up waste. Maximum operating temperature 65°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2007038
Size:
¾” BSP (M)
Marking:
Viega on drain body and on drain operating member
Installation Requirements:
R001 R576
Expiry date:
31/07/2025
Model:
Multiplex Trio MT9 drain/overflow 6170.10, 6170.11, 6170.12
Product Images

Approval Holder:
Viega GmbH & Co. KG
Company Name
Viega GmbH & Co. KG
Address
Viega Platz 1 57439 Attendorn
Country
Germany
Phone
+49 2722 61-0

View All Listings by this Company

Print This Approval


#2009059

Range of combined bath fillers and overflow waste assemblies with plastic bodies (various finishes). The outlet incorporates a plastic aerator and the product is supplied with a cable operated pop-up waste. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2009059
Size:
Stainless steel braided EPDM lined flexible hose assembly with a ½” BSP (F) captive nut end connection.
Marking:
Gessi on waste operating member
Installation Requirements:
R001 R576
Expiry date:
30/09/2025
Model:
01080 COMBINED BATH FILLERS AND OVERFLOWS

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 233 of 2215

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.