Directory Search Results

Print List

#2012048

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012048
Size:
½” BSP (M)
Marking:
WDI, manufacture mark (ECO) and model number on cistern body.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
K210-A01-E01002 WC concealed dual flushing cistern Frame included K210-A04-E01002 WC concealed dual flushing cistern Frame included K210-D01-E01002 WC concealed dual flushing cistern No frame K210-D03-E01002 WC concealed dual flushing cistern No frame

Approval Holder:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#2102802

Range of spring loaded, resilient trim, in-line check valve cartridges with plastic guide, stem and body with NBR or EPDM 'O'-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C for model NV15/DN15-EPDM 31.0002.0. All other models have a maximum operating temperature of 85°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2102802
Size:
DN15
Marking:
Neoperl, flow arrow and size moulded on body
Installation Requirements:
R001
Expiry date:
28/02/2026
Model:
NV15/DN15 31.4216.0 NV15/DN15-EPDM 31.0002.0 NV15/DN15-PR 31.0068.0 OV15/DN15 31.4215.0

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#2102803

Spring loaded, resilient trim, in-line check valve cartridges with plastic body. For insertion into pipes and fittings with specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2102803
Size:
DN8, DN10 & DN15.
Marking:
Gulf or Tumedei, flow arrow and model name on body
Installation Requirements:
R001
Expiry date:
28/02/2026
Model:
OV8-6844, OF10-2933 & OV15-2914

Approval Holder:
Gulf Rubber Group - Tumedei SpA
Company Name
Gulf Rubber Group - Tumedei SpA
Address
Via Bolzano 12, 38061 Ala (TN)
Country
Italy

View All Listings by this Company

Print This Approval


#2102805

OV & OF ranges of spring loaded, resilient trim, in-line check valve cartridges within a plastic housing. For insertion in pipes and fittings with specifically sized bores. Maximum working pressure 16.0 bar. Models OF10/DN8 - 31.4208.0 & OF10/DN8-EPDM - 31.0059 have a maximum operating temperature of 60°C. Model OV10/DN8 – 31.4210.0 has a maximum operating temperature of 85°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2102805
Size:
DN8
Marking:
Neoperl, flow arrow and size on body.
Installation Requirements:
R001
Expiry date:
28/02/2026
Model:
OV10/DN8 - 31.4210.0. OF10/DN8 - 31.4208.0. OF10/DN8-EPDM – 31.0059.0.

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#2012364

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body, compression models are nickle plated. A drain port is provided between the cartridges. Compression models are to be used with copper pipe to EN1057. Maximum working pressure 16.0 Bar. Maximum operating temperature for the Hattersley Fig 250W range 85°C. Maximum operating temperature of the Hattersley Fig 250CW is 60°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2012364
Size:
Hattersley Fig 250W– DN15, DN20, DN25, DN32, DN40, DN50. Hattersley Fig 250CW – 15mm, 22mm, 28mm compression.
Marking:
Hattersley Logo, flow arrow, PN, DN and CR mould on body
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
Hattersley Fig 250W & 250CW double check valve assemblies

Approval Holder:
Hattersley
Company Name
Hattersley
Address
Crane House Epsilon Terrace West Road Ipswich
Postcode
IP3 9FJ
Country
United Kingdom
General Email
uksales@hattersley.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 224 of 2215

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.