Range of stainless-steel press fittings with EPDM ‘O’-rings and EPDM washers. For use with stainless-steel pipe. Joints are achieved using a press fitting tool. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250302020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Aquapipe, Size and Grade (316L) on body - Aquapipe, Size and Grade (316L) on pipe.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

AQ00 PIPE Metal pipe in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm, Ø108mm AQ01 PIPE BRIDGE Metal pipe bridge in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm AQ02 EQUAL COUPLING in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm 76.1mm Ø88.9mm Ø108mm AQ03 ADJUSTABLE COUPLING in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ04 90°EQUAL ELBOW in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ05 90°PLAIN ELBOW in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ06 45°EQUAL ELBOW in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ07 45°PLAIN ELBOW in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ08 EQUAL TEE in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ09 PIPE CAP in SUS316L/ SUS304 Ø18mm Ø22mm Ø28mm Ø35mm Ø42mm Ø54mm Ø76.1mm Ø88.9mm Ø108mm AQ10 REDUCING TEE in SUS316L/ SUS304 Ø22-Ø18, Ø28-Ø18, Ø28-Ø22, Ø35-Ø18, Ø35-Ø22, Ø35-Ø28,Ø42-Ø18, Ø42-Ø22, Ø42-Ø28, Ø42-Ø35, Ø54-Ø18, Ø54-Ø22, Ø54- Ø28, Ø54-Ø35, Ø54-Ø42, Ø76.1-Ø18, Ø76.1-Ø22, Ø76.1-Ø28, Ø76.1-Ø35, Ø76.1-Ø42, Ø76.1-Ø54, Ø88.9-Ø18, Ø88.9-Ø22, Ø88.9- Ø28, Ø88.9-Ø35, Ø88.9-Ø42, Ø88.9-Ø54, Ø88.9-Ø76.1, Ø108-Ø18, Ø108-Ø22, Ø108-Ø28, Ø108-Ø35,Ø108-Ø42,Ø108-Ø54,Ø108- Ø76.1, Ø108-Ø88.9 AQ11 90°ELBOW FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø28-3/4, Ø28-1, Ø35-1 1/4, Ø42-1 1/2, Ø54-2 AQ12 90°ELBOW MALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø28-3/4, Ø28-1, Ø35-1, Ø35-1 1/4, Ø42-1 1/4, Ø42-1 1/2, Ø54-1 1/2, Ø54-2 AQ13 COUPLING MALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø22-1, Ø28-1/2, Ø28-3/4, Ø28-1, Ø28-1 1/4, Ø35-1, Ø35-1 1/4, Ø35-1 1/2, Ø42-1 1/4, Ø42-1 1/2, Ø54-1 1/2, Ø54-2, Ø76.1-2 1/2, Ø88.9-3 AQ14 COUPLING FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø22-1, Ø28-1/2, Ø28-3/4, Ø28-1, Ø28-1 1/4, Ø35-1, Ø35-1 1/4, Ø35-1 1/2, Ø42-1 1/2, Ø42-1 1/4, Ø54-1 1/2, Ø54-2, Ø76.1-2 1/2, Ø88.9-3 AQ15 REDUCING COUPLING in SUS316L/ SUS304 Ø22-Ø18, Ø28-Ø18, Ø28-Ø22, Ø35-Ø18, Ø35-Ø22, Ø35-Ø28, Ø42-Ø18, Ø42-Ø22, Ø42-Ø28, Ø42-Ø35, Ø54-Ø18, Ø54-Ø22, Ø54-Ø28, Ø54-Ø35, Ø54-Ø42, Ø76.1-Ø18, Ø76.1-Ø22, Ø76.1-Ø28, Ø76.1-Ø35, Ø76.1-Ø42, Ø76.1-Ø54, Ø88.9-Ø18, Ø88.9-Ø22, Ø88.9- Ø28, Ø88.9-Ø35, Ø88.9-Ø42, Ø88.9-Ø54, Ø88.9-Ø76.1, Ø108-Ø18, Ø108-Ø22, Ø108-Ø28, Ø108-Ø35, Ø108-Ø42, Ø108-Ø54, Ø108-Ø76.1, Ø108-Ø88.9 AQ16 PLAIN REDUCING COUPLING in SUS316L/ SUS304 Ø22-Ø18, Ø28-Ø18, Ø28-Ø22, Ø35-Ø18, Ø35-Ø22, Ø35-Ø28, Ø42-Ø18, Ø42-Ø22, Ø42-Ø28, Ø42-Ø35, Ø54-Ø18, Ø54-Ø22, Ø54- Ø28, Ø54-Ø35, Ø54-Ø42, Ø76.1-Ø54, Ø88.9-Ø54, Ø88.9-Ø76.1, Ø108-Ø54, Ø108-Ø76.1, Ø108-Ø88.9 AQ17 UNION MALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø22-1, Ø28-3/4, Ø28-1, Ø35-1 1/4, Ø35-1 1/2, Ø42-1 1/2, Ø54-2 AQ18 UNION FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-3/4, Ø22-1, Ø28-1, Ø28-1 1/4, Ø35-1 1/4, Ø35-1 1/2, Ø42-1 1/2, Ø42-2, Ø54-2 AQ19 SHORT TEE MALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø28-1/2, Ø28-3/4, Ø28-1, Ø35-1/2, Ø35-3/4, Ø35-1, Ø35-1 1/4, Ø42-1/2, Ø42-3/4, Ø42-1, Ø42-11/4, Ø42-1 1/2, Ø54-1/2, Ø54-3/4, Ø54-1, Ø54-1 1/4, Ø54-1 1/2 Ø54-2 AQ20 SHORT TEE FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø18-3/4, Ø22-1/2, Ø22-3/4, Ø28-1/2, Ø28-3/4, Ø28-1, Ø35-1/2, Ø35-3/4, Ø35-1, Ø35-1 1/4, Ø42-1/2, Ø42-3/4, Ø42-1, Ø42-1 1/4, Ø42-1 1/2, Ø54-1/2, Ø54-3/4, Ø54-1, Ø54-1 1/4, Ø54-1 1/2, Ø54-2, Ø76.1-3/4, Ø76.1-2, Ø88.9-3/4, Ø88.9-2, Ø108-3/4, Ø108-2 AQ21 BASED ELBOW FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø22-1/2, Ø22-3/4, Ø28-1/2, Ø28-1 AQ22 SHORT ELBOW FEMALE in SUS316L/ SUS304 Ø18-1/2, Ø22-1/2, Ø22-3/4, Ø28-1/2, Ø28-3/4,Ø28-1 AQ23 FLANGE in SUS316L/ SUS304 Ø35, Ø42, Ø54, Ø76.1, Ø88.9, Ø108 AQ24 REDUCING FLANGE PIPE in SUS316L/ SUS304 Ø76.1-Ø54, Ø76.1-Ø88.9, Ø88.9-Ø76.1, Ø88.9-Ø108, Ø108-Ø88.9, Ø133-Ø108 There are two kinds of body materials： SUS316L or SUS304 Stainless Steel Pipe according to EN 10312；M-profile press fittings. All imperial fittings are BSP.

Approval Holder:

ZHEJIANG COMPRESSED FLUID TECHNOLOGY CO.,LTD

Company Name

ZHEJIANG COMPRESSED FLUID TECHNOLOGY CO.,LTD

Address

No.18 Mo Gan Shan Road, Beilun District Ningbo, Zhejiang Province

Country

China

General Email

technical02@shangdurz.com

View All Listings by this Company

Range of CU type press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241108017

Size:

see models

Marking:

Flowflex logo, WRAS & size etched on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

5063022703699 PRESS 45DEG STREET ELBOW 15mm 5063022703569 PRESS 45DEG STREET ELBOW 22mm 5063022703705 PRESS 45DEG STREET ELBOW 28mm 5063022703576 PRESS 45DEG ELBOW 15mm 5063022703590 PRESS 45DEG ELBOW 22mm 5063022703682 PRESS 45DEG ELBOW 28mm 5063022703637 PRESS EQUAL ELBOW 15mm 5063022703620 PRESS EQUAL ELBOW 22mm 5063022703750 PRESS EQUAL ELBOW 28mm 5063022703613 PRESS STREET ELBOW 22mm 5063022703743 PRESS STREET ELBOW 28mm 5063022703781 PRESS EQUAL TEE 15mm 5063022703521 PRESS EQUAL TEE 22mm 5063022703767 PRESS EQUAL TEE 28mm 5063022703729 PRESS REDUCED END TEE 5063022703712 PRESS REDUCED BRANCH TEE 5063022703774 PRESS FITTING REDUCER 22 x 15mm 5063022703736 PRESS FITTING REDUCER 28 x 15mm 5063022703545 PRESS FITTING REDUCER 28 x 22mm 5063022703644 PRESS COUPLING 15mm 5063022703675 PRESS COUPLING 22mm 5063022703583 PRESS COUPLING 28mm 5063022703606 PRESS SLIP COUPLER 15mm 5063022703651 PRESS SLIP COUPLER 22mm 5063022703668 PRESS STOP END 15mm 5063022703538 PRESS STOP END 22mm 5063022703552 PRESS STOP END 28mm

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Manufacturer:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Range of clamp fittings incorporating DZR brass bodies. For use with PE 100 RC pipe (manufactured to EN12201) only. Maximum operating pressure: 16 bar. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250504005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODELS

Marking:

Uponor logo (U), CR, W (wipex code on connections) and size.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Wipex coupling: 1018328 (size 25x2,3-G1) 1018329 (size 32x2,9-G1) 1018330 (size 40x3,7-G1 ¼) 1018331 (size 50x4,6-G1 ¼) 1018332 (size 63x5,8-G2) 1018333 (size 75x6,8-G2) 1018334 (size 90x8,2G3) 1018335 (size 110x10,0-G3) Wipex tee: 1018345 (size G1-G1-G1) 1018346 (size G1 ¼-G1 ¼-G1 ¼) 1018347 (size G2-G2-G2) 1018348 (size G3-G3-G3) Wipex elbow: 1018350 (size G1-G1) 1018351 (size G1 ¼-G1 ¼) 1018352 (size G2-G2) 1018353 (size G3-G3) Wipex sleeve: 1018355 (size G1-G1) 1018356 (size G1 ¼-G1 ¼) 1018357 (size G2-G2) 1018358 (size G3-G3) Wipex flange: 1018359 (size F25/4-85/G1) 1018360 (size F32/4-100/G1 ¼) 1018362 (size F50/4-125/G2) 1018364 (size F80/8-160/G3) Wipex reducer male x female: 1018368 (size G1 ¼-G1) 1018369 (size G1 ½-G1 ¼) 1018371 (size G2-G1) 1018372 (size G2-G1 ¼) 1018374 (size G3-G1) 1018375 (size G3-G1 ¼) 1018376 (size G3-G2) Wipex jointing equal: 1042972 (size 25x2,3-25x2,3) 1042973 (size 32x2,9-32x2,9) 1042980 (size 40x3,7-40x3,7) 1042984 (size 50x4,6-50x4,6) 1042981 (size 63x5,8-63x5,8) 1042985 (size 75x6,8-75x6,8) 1042986 (size 90x8,2-90x8,2) 1042987 (size 110x10-110x10) Wipex swivel union: 1045455 (size G1) 1045456 (size G1 ¼-G1) 1045457 (size G1 ¼) 1045458 (size G2-G1 ¼) 1045459 (size G2) 1045460 (size G3-G2) 1045461 (size G3)

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Range of Instantor Irish Compression Fittings with brass bodies for use with copper pipe to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250504018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODEL

Marking:

‘S’ logo on body. Irish Instantor, size, IS/EN1254-2 on nut.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

310004 Straight Coupler - 1 1/4" 310005 Straight Coupler - 1 1/2" 310006 Straight Coupler - 2" 310042 Reducing Straight Coupler - 1 1/4" X 3/4" 310043 Reducing Straight Coupler - 1 1/4" X 1" 311003 Straight Threaded Coupler - 1" 311004 Straight Threaded Coupler M.I X C - 1 1/4" 311005 Straight Threaded Coupler M.I X C - 1 1/2" 311006 Straight Threaded Coupler M.I X C - 2" 311043 Reducing Straight Threaded Coupler M.I X C - 1 1/4" X 1" 311054 Reducing Straight Threaded Coupler M.I X C - 1 1/2" x" x 1 4 1" 311035 Reducing straight threaded coupler M.I x C 1" x 1 1/2" 311045 Reducing Straight threaded Coupler M.I x C 1 1/4" x 1 1/2" 312004 Straight Threaded coupler F.I x C 1 1/4" 312005 Straight Threaded coupler F.I x C 1 1/2" 312006 Straight Threaded coupler F.I x C 2" 312045 Straight Threaded coupler F.I x C 1 1/4" x 1 1/2" 315004 Elbow CxC 1 1/4" 315005 Elbow CxC 1 1/2" 315006 Elbow CxC 2" 316004 Elbow Threaded M.I 1 1/4" 316005 Elbow Threaded M.I 1 1/2" 316006 Elbow Threaded M.I 2" 317004 Elbow Threaded F.I 1 1/4" 317005 Elbow threaded F.I 1 1/2" 317006 Elbow Threaded F.I 2" 318004 Equal Tee 1 1/4" 318005 Equal Tee 1 1/2" 318006 Equal Tee 2" 318442 Reducing Tee 1 1/4" x 1 1/4" x 3/4" 318443 Reducing Tee 1 1/4" x 1 1/4" x 1" 318553 Reducing Tee 1 1/2" x 1 1/2" x 1" 318554 Reducing Tee 1 1/2" x 1 1/2" X 1 1/4" 310003 Straight Coupler -1" 312003 Straight Threaded coupler F.I x C 1"

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Conex Works, Santry Avenue, Dublin

Postcode

D09 K160

Country

Ireland

Phone

353 1 842 6255

General Email

sales@sanbra.ie

View All Listings by this Company

FLOWTECH range of fusion welded, PP-RCT fittings for use with Atlas PP-RCTGF pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250402066

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

20mm – 110mm - FOR INDIVIDUAL SIZE SEE MODEL

Marking:

'FLOWTECH UAE, PN-25, PP-RCT & size on fitting. Modern Plastic Industry, Flowtech & technical information on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

Model Code (Size): 90° Elbow FCTE9020 (20mm) FCTE9025 (25mm) FCTE9032 (32mm) FCTE9040 (40mm) FCTE9050 (50mm) FCTE9063 (63mm) FCTE9075 (75mm) FCTE9090 (90mm) FCTE90110 (110mm) 45° Elbow FCTE4520 (20mm) FCTE4525 (25mm) FCTE4532 (32mm) FCTE4540 (40mm) FCTE4550 (50mm) FCTE4563 (63mm) FCTE4575 (75mm) FCTE4590 (90mm) FCTE45110 (110mm) Tee: FCTT20 (20mm) FCTT25 (25mm) FCTT32 (32mm) FCTT40 (40mm) FCTT50 (50mm) FCTT63 (63mm) FCTT75 (75mm) FCTT90 (90mm) FCTT110 (110mm) Socket: FCTS20 (20mm) FCTS25 (25mm) FCTS32 (32mm) FCTS40 (40mm) FCTS50 (50mm) FCTS63 (63mm) FCTS75 (75mm) FCTS90 (90mm) FCTS110 (110mm) End Plug: FCTEC20 (20mm) FCTEC25 (25mm) FCTEC32 (32mm) FCTEC40 (40mm) FCTEC50 (50mm) FCTEC63 (63mm) FCTEC75 (75mm) FCTEC90 (90mm) FCTEC110 (110mm) Reducing Tee: FCTRT20X25X20 (20mm x 25mm x 20mm) FCTRT25X20X20 (25mm x 20mm x 20mm) FCTRT25X20 (25mm x 20mm x 25mm) FCTRT32X20 (32mm x 20mm x 32mm) FCTRT25X32 (32mm x 25mm x 25mm) FCTRT32X25 (32mm x 25mm x 32mm) FCTRT40X20 (40mm x 20mm x 40mm) FCTRT40X25 (40mm x 25mm x 40mm) FCTRT40X32 (40mm x 32mm x 40mm) FCTRT50X20 (50mm x 20mm x 50mm) FCTRT50X25 (50mm x 25mm x 50mm) FCTRT50X32 (50mm x 32mm x 50mm) FCTRT50X40 (50mm x 40mm x 50mm) FCTRT63X20 (63mm x 20mm x 63mm) FCTRT63X25 (63mm x 25mm x 63mm) FCTRT63X32 (63mm x 32mm x 63mm) FCTRT63X40 (63mm x 40mm x 63mm) FCTRT63X50 (63mm x 50mm x 63mm) FCTRT75X32 (75mm x 32mm x 75mm) FCTRT75X40 (75mm x 40mm x 75mm) FCTRT75X50 (75mm x 50mm x 75mm) FCTRT75X63 (75mm x 63mm x 75mm) FCTRT90X40 (90mm x 40mm x 90mm) FCTRT90X50 (90mm x 50mm x 90mm) FCTRT90X63 (90mm x 63mm x 90mm) FCTRT90X75 (90mm x 75mm x 90mm) FCTRT110X63 (110mm x 63mm x 110mm) FCTRT110X75 (110mm x 75mm x 110mm) FCTRT110X90 (110mm x 90mm x 110mm) Reducer: FCTR25X20 (25mm x 20mm FCTR32X20 (32mm x 20mm) FCTR32X25 (32mm x 25mm) FCTR40X20 (40mm x 20mm) FCTR40X25 (40mm x 25mm) FCTR40X32 (40mm x 32mm) FCTR50X20 (50mm x 20mm) FCTR50X25 (50mm x 25mm) FCTR50X32 (50mm x 32mm) FCTR50X40 (50mm x 40mm) FCTR63X20 (63mm x 20mm) FCTR63X25 (63mm x 25mm) FCTR63X32 (63mm x 32mm) FCTR63X40 (63mm x 40mm) FCTR63X50 (63mm x 50mm) FCTR75X40 (75mm x 40mm) FCTR75X50 (75mm x 50mm) FCTR75X63 (75mm x 63mm) FCTR90X50 (90mm x 50mm) FCTR90X63 (90mm x 63mm) FCTR90X75 (90mm x 75mm) FCTR110X63 (110mm x 63mm) FCTR110X75 (110mm x 75mm) FCTR110X90 (110mm x 90mm) End Plug - BSP(M): FCTEP0.5 (1/2" BSP(M)) FCTEP0.75 (3/4" BSP(M)) FCTEP1 (1" BSP(M)) Cross Tee: FCTCT20 (20mm) FCTCT25 (25mm) FCTCT32 (32mm) Union Stub: CTUS20 (20mm) CTUS25 (25mm) CTUS32 (32mm) CTUS40 (40mm) CTUS50 (50mm) CTUS63 (63mm) Pipe Bracket: FCTPB20 (20mm) FCTPB25 (25mm) FCTPB32 (32mm) Cross Over Union: FCTCOS20(20mm) FCTCOS25 (25mm) FCTCOS32 (32mm) Plastic Union: FCTU20 (20mm) FCTU25 (25mm) FCTU32 (32mm) Cross Over Small: FCTCO20 (20mm) FCTCO25 (25mm FCTCO32 £"mm) Flange Stub: FCTST63 (63mm) FCTST75 (75mm) FCTST90 (90mm) FCTST110 (110mm) End Plug: FCTEPL0.5 (1/2'' BSP (M)) FCTEPL0.75 (3/4’' BSP (M)) Female Tee Transition: FCTFT20X0.5 (20mm x 1/2" BSP (F)) FCTFT20X0.75 (20mm x 3/4" BSP (F)) FCTFT25X0.5 (25mm x 1/2" BSP (F)) FCTFT25X0.75 (25mm x 3/4" BSP (F)) FCTFT32X0.5 (32mm x 1/2" BSP (F)) FCTFT32X0.75 32mm x 3/4" BSP (F)) FCTFT32X1 (32mm x 1" BSP (F)) Female Elbow Transition: FCTFE20X0.5 (20mm x 1/2’’ BSP (F)) FCTFE20X0.75 (20mm x 3/4" BSP (F)) FCTFE25X0.5 (25mm x 1/2" BSP (F)) FCTFE25X0.75 (25mm x 3/4" BSP (F)) FCTFE32X0.5 (32mm x 1/2" BSP (F)) FCTFE32X0.75 (32mm x 3/4" BSP (F)) FCTFE32X1 (32mm x 1" BSP (F)) Female Socket Transition: FCTFS20X0.5 (20mm x 1/2’’ BSP (F)) FCTFS20X0.75 (20mm x 3/4" BSP (F)) FCTFS25X0.5 (25mm x 1/2" BSP (F)) FCTFS25X0.75 (25mm x 3/4" BSP (F)) FCTFS32X0.5 (32mm x 1/2" BSP (F)) FCTFS32X0.75 (32mm x 3/4" BSP (F)) Female Hex Socket Transition: FCTFHS32X1 (32mm x 1" BSP (F)) FCTFHS40X1 (40mm x 1’’ BSP (F)) FCTFHS40X1.25 (40mm x 1.1/4’’ BSP (F)) FCTFHS50X1.5 (50mm x 1.1/2’’ BSP (F)) FCTFHS63X2 (63mm x 2’’ BSP (F)) FCTFHS75X2.5 (75mm x 2.1/2’’ BSP (F)) FCTFHS90X3 (90mm x 3’’ BSP (F)) FCTFHS110X4 (110mm x 4’’ BSP (F)) Male Socket Transition: FCTMS20X0.5 (20mm x 1/2’’ BSP (M)) FCTMS20X0.75 (20mm x 3/4" BSP (M)) FCTMS25X0.5 (25mm x 1/2" BSP (M)) FCTMS25X0.75 (25mm x 3/4" BSP (M)) FCTMS32X0.5 (32mm x 1/2" BSP (M)) FCTMS32X0.75 (32mm x 3/4" BSP (M)) Male Hex Socket Transition: FCTMHS32X1 (32mm x 1" BSP (M)) FCTMHS40X1 (40mm x 1’’ BSP (M)) FCTMHS40X1.25 (40mm x 1.1/4’’ BSP (M)) FCTMHS50X1.5 (50mm x 1.1/2’’ BSP (M)) FCTMHS63X2 (63mm x 2’’ BSP (M)) FCTMHS75X2.5 (75mm x 2.1/2’’ BSP (M)) FCTMHS90X3 (90mm x 3’’ BSP (M)) FCTMHS110X4 (110mm x 4’’ BSP (M)) Male Elbow Transition: FCTME20X0.5 (20mm x 1/2’’ BSP (M)) FCTME20X0.75 (20mm x 3/4" BSP (M)) FCTME25X0.5 (25mm x 1/2" BSP (M)) FCTME25X0.75 (25mm x 3/4" BSP (M)) FCTME32X0.5 (32mm x 1/2" BSP (M)) FCTME32X0.75 (32mm x 3/4" BSP (M)) FCTME32X1 (32mm x 1" BSP (M)) Pipe: FCTGF20X2.8 SD7.4 (20mm OD x 2.8mm thickness) FCTGF25X3.5 SD7.4 (25mm OD x 3.5mm thickness) FCTGF32X4.4 SD7.4 (32mm OD x 4.4mm thickness) FCTGF40X5.5 SD7.4 (40mm OD x 5.5mm thickness) FCTGF50X6.9 SD7.4 (50mm OD x 6.9mm thickness) FCTGF63X8.6 SD7.4 (63mm OD x 8.6mm thickness) FCTGF75X10.3 SD7.4 (75mm OD x 10.3mm thickness) FCTGF90X12.3 SD7.4 (90mm OD x 12.3mm thickness) FCTGF110X15.1 SD7.4 (110mm OD x 15.1mm thickness)

Approval Holder:

Modern Plastic Industry LLC

Company Name

Modern Plastic Industry LLC

Address

Dubai Investment Park, PO Box No. 31550, Dubai

Country

United Arab Emirates

View All Listings by this Company