'ELM EPX 13'. Factory applied, blue coloured epoxy coating. Apply as per manufacturer's instructions to end users reference no. 'ELM/2019/10/001' dated '23/08/2024'. Cure for 10 minutes@130°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250355076

Expiry date:

31/03/2030

Approval Holder:

Element Boya SAN. VE TIC. A.S

Company Name

Element Boya SAN. VE TIC. A.S

Address

Birlik OSB 6, Sokak No. 5, Tuzla, Istanbul 34953

Country

Turkey

Phone

+90 216 593 29 80

General Email

info@elementboya.com

View All Listings by this Company

'Polyflon PTFE TC-7808-19 Grey PTFE Coating'. Factory applied, grey coloured PTFE coating. Apply as per manufacturer's technical data sheet dated 'June 8, 2012'. Cure for 20 minutes@380°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250455017

Expiry date:

30/04/2030

'Carboguard AQP FC Part A and Part B'. Site applied, grey coloured (once applied) epoxy coating. Mix Parts A & B in a weight ratio of 1:1 and apply as per manufacturer's Product Data Sheet '8163', dated 'March 2025'. Cure Coat 1 for 24 hours at 20°C and Coat 2 for 7 days at 20°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5048 Coatings, paints and linings (site applied)

Section Subtitle:

Multi purpose.

WRAS Approval Number:

250355030

Expiry date:

31/03/2030

Approval Holder:

Carboline Norge AS

Company Name

Carboline Norge AS

Address

Husebysletta 9, 3414, Lierstranda

Country

Norway

View All Listings by this Company

'Monoflex W'. Grey coloured, extruded TPO 'tape'. Shore hardness 91. Tested in-radius size 0.45mm. For use with water up to 70°C.

Section:

5055 Concrete, Cement and Mortar

Section Subtitle:

Waterproofers.

WRAS Approval Number:

250355064

Expiry date:

31/03/2030

Approval Holder:

Gebruder Jaeger GmbH

Company Name

Gebruder Jaeger GmbH

Address

Otto-Hahn-Str. 7, 42369 Wuppertal

Country

Germany

View All Listings by this Company

'LEAKBLOK® P100'. Green coloured fibre/NBR gasket material manufactured by calandering. For use with water up to 23°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Section:

5075 Fibre

Section Subtitle:

These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

WRAS Approval Number:

250355061

Expiry date:

31/03/2030