Range of chromium plated stainless steel or brass interlocked shower hoses with an optional PVC outer layer. Incorporating either a PVC or TPE inner hose and EPDM gaskets. Maximum operating temperature 60°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2106062

Note:

Open outlet use only.

Size:

½” BSP Captive nut inlet x outlet.

Marking:

DTC15 WRAS and date of manufacture (YY) on ferrule.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

HOS1.75CPS02 & D50010011

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of EPDM or PVC lined, interlocked stainless-steel shower hoses. Open outlet use only. Hoses with an EPDM liner have a maximum operating temperature of 85°C. Hoses with an PVC liner have a maximum operating temperature of 65°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

250512006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) captive nut end connections

Marking:

NT (company logo), WRAS & date of manufacture (YYYY) on sleeve

Installation Requirements:

R001 R040

Expiry date:

31/05/2030

Model:

NT (stainless steel double lock)-X-ww-xx-yyy-zzz Where – X = inner hose: A – EPDM, B – PVC. ww = connector size: 01 = G½” Hexagon nut. xx = connector size: 01 = G½” Conical nut. yyy = hose bore: 140 = DN14, 160 = DN16. zzz = hose length: 50cm to 300cm.

Approval Holder:

Xiamen Nuote Sanitary Ware Co. Ltd.

Company Name

Xiamen Nuote Sanitary Ware Co. Ltd.

Address

no 563 TONLONG SECOND ROAD TORCH HI TECH ZONE

Postcode

CHINA

Country

XIAMEN

View All Listings by this Company

Manufacturer:

Xiamen Nuote Sanitary Ware Co. Ltd.

Company Name

Xiamen Nuote Sanitary Ware Co. Ltd.

Address

no 563 TONLONG SECOND ROAD TORCH HI TECH ZONE

Postcode

CHINA

Country

XIAMEN

View All Listings by this Company

HOS wwwxxyy z - Range of EPDM or PVC lined, interlocked stainless-steel shower hoses. Open outlet use only. Hoses with an EPDM liner have a maximum operating temperature of 85°C. Hoses with an PVC liner have a maximum operating temperature of 65°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

250512022

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) captive nut end connections

Marking:

NT (company logo), WRAS & date of manufacture (YYYY) on sleeve

Installation Requirements:

R001 R040

Expiry date:

31/05/2030

Model:

HOS (stainless steel double lock) - www-xx-yy-z Where: www = Length of hose length in mm xx = Connection type CC - Cone to Cone CN - Cone to Nut NN - Nut to Nut yy = Bore type 01 - Small bore 02 - Large Bore z = Finish C - Chrome W - White G – Gold BLK - Black BB – Brush Black

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Manufacturer:

Xiamen Nuote Sanitary Ware Co. Ltd.

Company Name

Xiamen Nuote Sanitary Ware Co. Ltd.

Address

no 563 TONLONG SECOND ROAD TORCH HI TECH ZONE

Postcode

CHINA

Country

XIAMEN

General Email

View All Listings by this Company

Multi-layer PVC shower hoses with Black, Brushed Brass or Chrome finish with brass end connections, EPDM gasket and NBR ‘O’-ring. Open outlet use only. Maximum operating temperature 65°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240502073

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) x ½” BSP (F)

Marking:

Hualing logo, WRAS and year of manufacture YYYY on ferrule.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

HOS 150CC03 BLK HOS 150CC03 BB HOS 150CC03 C

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Manufacturer:

Kaiping City Hualing Hoses Co Ltd

Company Name

Kaiping City Hualing Hoses Co Ltd

Address

No.18 East Road, Industrial Park Shuikou Town Kaiping City Guangdong Province

Country

CHINA

General Email

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103353

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

HOSE 1000 available with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring

Marking:

Intatec logo, WRAS and date of manufacture (YYYY) on ferrule

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

HOSE 1000

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Range of PVC outer layer shower hoses with a PVC internal layer and EPDM washers. Open outlet use only. Maximum operating temperature:60C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250488007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) Captive nut.

Marking:

Aqualisa on ferrule

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

707019 1.5m Smooth Hose Matt Black AL241 Shower Hose

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections. Maximum working pressure: 6.0 bar @ 65°C Maximum working pressure: 12.0 bar @ 20°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

241202067

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

12BAR @ 20°C

Size:

See model

Marking:

Qualflex, QWRAS, 6bar@65°c /12 bar @20°c, DOM (M.YY) stamped on ferrule

Installation Requirements:

R001 R008

Expiry date:

31/12/2029

Model:

(HOSE900001): DN10 x Brass 3/4BSP Female Elbow x Brass 1/2BSP Female straight. (HOSE202105): DN10 x Brass 3/4BPP Female Straight x Brass 3/4BSP Male (HOSE900004): DN10 x Brass 3/8BSP Female Elbow x Brass 1/2BSP Female straight (HOSE202107): DN10 x Brass 3/4BSP Female Elbow x Brass 3/4BSP Female straight. (HOSE265012) : DN10 x Brass 15mm Compression x Brass 3/8NPT Male

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Hydralectric Group Ltd.

Company Name

Hydralectric Group Ltd.

Address

5 High Road, Byfleet, Surrey

Postcode

KT14 7QE

Country

United Kingdom

Phone

+44 1932 334 200

General Email

jamie.balkwill@hydralectric.com

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2301375

Size:

DN8 with end connections: M10, M12, F3/8”, F1/2”, 14.7mm & 15mm. DN10 with end connections: M10, M12, F3/8”, F1/2”, F3/4”, 14.7mm, 15mm & 22mm. DN13 with end connections: F1/2”, F3/4”, 14.7mm, 15mm & 22mm.

Marking:

Aqua Pro, WRAS & year of manufacture YYYY on ferrule

Installation Requirements:

R001

Expiry date:

31/01/2028

Model:

APSS5360 SS FLEXIBLE PIPE 1/2" X 1/2" X 60CM APSS5345 SS FLEXIBLE PIPE 1/2" X 1/2" X 45CM APSS5330 SS FLEXIBLE PIPE 1/2" X 1/2" X 30CM APSS5390 SS FLEXIBLE PIPE 1/2" X 1/2" X 90CM APSS3860 SS FLEXIBLE PIPE 3/8" X 3/8" X 60CM APSS3845 SS FLEXIBLE PIPE 3/8" X 3/8" X 45CM APSS3830 SS FLEXIBLE PIPE 3/8" X 3/8" X 30CM APSS123860 SS FLEXIBLE PIPE 1/2" X 3/8" X 60CM APSS123845 SS FLEXIBLE PIPE 1/2" X 3/8" X 45CM

Approval Holder:

Ultimate Trading Co(L.L.C.)

Company Name

Ultimate Trading Co(L.L.C.)

Address

No 2 Street 13D Nakheei Road, Deira Dubai

Country

U.A.E

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Models with compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250404006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN8 bore diameter hose with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 20= M10*(12‐110) with single O‐ring or double O-ring 21= M11*(12‐110) with single O‐ring or double O-ring 22= M12*(12‐110) with single O‐ring or double O-ring 23= M14*(12‐110) with single O‐ring or double O-ring 24= M15*(12‐110) with single O‐ring or double O-ring 25= M16*(12‐110) with single O‐ring or double O-ring 26= F15 27= 15mm smooth tube 31= 15mm compression fitting 35= 10mm pushfit 38= 22mm pushfit 39= 10mm pushfit isolation valve 41= 15mm pushfit isolation valve 42= 22mm pushfit isolation valve DN10 bore diameter hose with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 16= F1 17= F1 elbow 18= M1 20= M10*(12‐110) with single O‐ring or double O-ring 21= M11*(12‐110) with single O‐ring or double O-ring 22= M12*(12‐110) with single O‐ring or double O-ring 23= M14*(12‐110) with single O‐ring or double O-ring 24= M15*(12‐110) with single O‐ring or double O-ring 25= M16*(12‐110) with single O‐ring or double O-ring 27= 15mm smooth tube 28= 22mm smooth tube 31= 15mm compression fitting 35= 10mm pushfit 38= 22mm pushfit 39= 10mm pushfit isolation valve 41= 15mm pushfit isolation valve 42= 22mm pushfit isolation valve DN13 bore diameter hose with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 16= F1 17= F1 elbow 18= M1 24= M15*(12‐110) with single O‐ring or double O-ring 25= M16*(12‐110) with single O‐ring or double O-ring 27= 15mm smooth tube 28= 22mm smooth tube 31= 15mm compression fitting 38= 22mm pushfit 41= 15mm pushfit isolation valve 42= 22mm pushfit isolation valve DN19 bore diameter hose with the following end connections: 13= F3/4 14= F3/4 elbow 15= M3/4 16= F1 17= F1 elbow 18= M1 28= 22mm smooth tube 38= 22mm pushfit 42= 22mm pushfit isolation valve Sizes added July 2025: DN8 09= F1/2 10= F1/2 wing nut 29= 10mm compression fitting 30= 12mm compression fitting 32= 22mm compression fitting 33= 15mm isolation valve 34= 22mm isolation valve 36= 12mm pushfit 37= 15mm pushfit 40= 12mm pushfit isolation valve DN10 09= F1/2 10= F1/2 wing nut 30= 12mm compression fitting 32= 22mm compression fitting 33= 15mm isolation valve 34= 22mm isolation valve 36= 12mm pushfit 37= 15mm pushfit 40= 12mm pushfit isolation valve DN13 09= F1/2 10= F1/2 wing nut 32= 22mm compression fitting 33= 15mm isolation valve 34= 22mm isolation valve 37= 15mm pushfit Dn19 32 = 22mm Compression fitting 34 = 22mm isolation valve

Marking:

Justlink, WRAS, ‘it’ and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

JL – A*B – XX – D – Eit – XXX A*B denotes connection size and type and is replaced with a two digit number (please refer to size). XX denotes bore diameter of hose and is replaced with a two digit number (please refer to size). D denotes the outer braided material and is replaced with: SS = stainless steel wire, SN = stainless steel wire plus black nylon wire, N = Nylon wire. E denotes the liner material and is replaced with 1 for EPDM. XXX denotes the length of the hose between 15cm & 200cm and is replaced with a number.

Approval Holder:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang

Postcode

317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103354

Size:

DN8 (denoted by 08) bore diameter available with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter available with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter available with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring

Marking:

GENEBRE, date of manufacture (MMYY) GENEBRE label on the product.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

GEFLEX A*B XX D E XXX A*B denotes connection size and type and is replaced with a two digit number (please refer to size). XX denotes bore diameter of hose and is replaced with a two digit number (please refer to size). D denotes the outer braided material and is replaced with: SS = stainless steel wire, SN = stainless steel wire plus black nylon wire N = Nylon wire. E denotes the liner material and is replaced with 0 for EPDM. XXX denotes the length of the hose (15cm to 200cm) and is replaced with a number.

Approval Holder:

Genebre, S.A

Company Name

Genebre, S.A

Address

Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat

Postcode

08908

Country

Spain

Phone

(+34) 93 298 80 00

General Email

cazorla@genebre.es

View All Listings by this Company