Range of in-line flow sensors incorporating either brass (type 230, 235 & 236) or plastic (type 200 & 210) bodies & EPDM ‘O’-rings. Maximum working pressure 12.0 Bar Maximum operating temperature 100.0°C

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

251102718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Type 200 range is for use with copper pipe (manufactured to EN 1057)

Size:

Type 200 Range – Clip connection: DN6, DN8 & DN10 = ½” or ¾”, DN15 = ¾” or 1”, DN20 = 1” or 1. ¼” and DN25 = 1.¼” or 1.½” Type 210 Range – BSP (M) DN6, DN8 & DN10 = ½” or ¾”, DN15 = ¾” or 1”, DN20 = 1” or 1. ¼” and DN25 = 1.¼” or 1.½” Type 230 Range – BSP (M) DN10 = ¾”, DN15 = ¾” or 1”, DN20 = 1” or 1. ¼” and DN25 = 1.¼” or 1.½” Type 235 and Type 236 Ranges – BSP (M) DN8 = ½” or ¾”, DN10 = ½” or ¾” or 1”, DN15 = ¾” or 1”, DN20 = 1” or 1. ¼”, DN25 = 1.¼” or 1.½” and DN32 = 1.½”

Marking:

Type 200 - Huba Control, model number and other technical information on adhesive label on body. DN and flow arrow on body. Model number and date of manufacture (YY-MM-DD) on sensor. Type 210 - Huba Control, model number, DN, flow arrow and other technical information on body. Model number and date of manufacture (YY-MM-DD) on sensor. Type 230 - Huba Control, DN and flow arrow on body. Huba Control and other technical information on adhesive label on sensor cap. Type 235 - Huba Control, model number and other technical information on adhesive label on body. DN and flow arrow on body. Model number and date of manufacture (YY-MM-DD) on sensor. Type 236 - Huba control, Model number and other technical information on adhesive label on body. DN and Flow arrow on body. Model number and date of manufacture (YY-MM-DD) on sensor.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

Type 200 – DN6, DN8, DN10, DN15, DN20 & DN25. Type 210 – DN6, DN8, DN10, DN15, DN20 & DN25. Type 230 – DN10, DN15, DN20 & DN25. Type 235 – DN8, DN10, DN15, DN20, DN25 & DN32. Type 236 – DN8, DN10, DN15, DN20, DN25 & DN32. Type 201 – Flow Sensor Head, Type 211 – Flow Sensor Head.

Approval Holder:

Huba Control AG

Company Name

Huba Control AG

Address

Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

Range of stainless steel bodied mechanical pump shaft seals. Cold water use only.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

251106001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For installation into specifically dimensioned pumps.

Size:

Suitable for shaft sizes from 25 mm up to 195 mm.

Marking:

“Chesterton”; “442” on body.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

442C – Cartridge split mechanical seal (for shaft sizes from 25 mm up to 120 mm), 442C XL– Cartridge split mechanical seal (for shaft sizes from 125 mm up to 195 mm).

Approval Holder:

Chesterton International GmbH

Company Name

Chesterton International GmbH

Address

Am Lenzenfleck 23, DE-85737 Ismaning

Country

Germany

View All Listings by this Company

Range of DZR brass metering stations supplied with red and blue test points. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” - 2” BSP, BSPP or NPT (FxM).

Marking:

ALBION, CR, PN, Size “inches” & flow arrow.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

ART67 DNXX Where XX can be replaced with: DN15UUL, DN15UL， DN15L， DN15M， DN15, DN20, DN25, DN32, DN40, DN50.

Product Images

Approval Holder:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company