Wall mounted two hole, double outlet (swivel) combination tap assembly (chromium plated brass) with quarter turn ceramic disc headworks and single lever type operating members. The product is supplied with plastic back nuts. Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0570 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

2104801

Size:

½” BSP (M)

Marking:

DTC34 (brand of Methven) on rear of body.

Installation Requirements:

R001 R040

Expiry date:

30/04/2026

Model:

DLV305WM

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of free-standing sanitary macerating disposal units. The units are fed via a flexible hose assembly. Flow is controlled by a solenoid valve and discharges via a type `AA` air gap. Maximum working pressure 10.0 bar. Cold water use only.

Section:

0950 Disposal Units

WRAS Approval Number:

2107802

Note:

This appliance incorporates a fluid category 5 backflow prevention device.

Size:

Nylon bradied TPE lined flexible hose assembly with ¾” BSP captive nuts.

Marking:

Haigh, model & technical information on adhesive label on side panel. Haigh on adhesive label on operating member.

Installation Requirements:

R001 R009

Expiry date:

31/07/2026

Model:

Classic+, Panaway & Incomaster

Approval Holder:

The Haigh Engineering Company Limited

Company Name

The Haigh Engineering Company Limited

Address

Alton Road Ross-on-Wye Herefordshire

Country

HR9 5NG

General Email

STHURLOW@HAIGH.CO.UK

View All Listings by this Company

Manufacturer:

The Haigh Engineering Company Limited

Company Name

The Haigh Engineering Company Limited

Address

Alton Road Ross-on-Wye Herefordshire

Country

HR9 5NG

General Email

STHURLOW@HAIGH.CO.UK

View All Listings by this Company

FloFit range of push fit fittings (polybutylene body) for use with Qual-Pex Barrier Pipe, Qual-PB polybutylene barrier pipe or copper tube. Above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101806

Size:

see model

Marking:

FloFit+ on body of fitting. Kitemark and size on collet of fitting.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Straight Coupling: FC10 – 10mm FC15 – 15mm FC22 – 22mm FC28 – 28mm Reducing Coupling: FRC15 – 15mm x 10mm FRC22 – 22mm x 15mm Straight Stem Reducer: FSR1015 – 10mm x 15mm FSR1522 – 15mm x 22mm FSR1528 – 15mm x 28mm FSR2228 – 22mm x 28mm 90° Elbow: FB10 – 10mm FB15 – 15mm FB22 – 22mm FB28 – 28mm Equal Tee: FT10 – 10mm FT15 – 15mm FT22 – 22mm FT28 – 28mm Reducing Tee: FRT151010 – 15mm x 10mm x 10mm FRT151510 – 15mm x 15mm x 10mm FRT151522 – 15mm x 15mm x 22mm FRT221515 – 22mm x 15mm x 15mm FRT221522 – 22mm x 15mm x 22mm FRT222210 – 22mm x 22mm x 10mm FRT222215 – 22mm x 22mm x 15mm FRT282222 – 28mm x 22mm x 22mm FRT282228 – 28mm x 22mm x 28mm FRT282815 – 28mm x 28mm x 15mm FRT282822 – 28mm x 28mm x 22mm FRT222228 – 22mm x 22mm x 28mm Stem Elbow: FS10 – 10mm FS15 – 15mm FS22 – 22mm Stop End: FE10 – 10mm FE15 – 15mm FE22 – 22mm FE28 – 28mm Outlets Socket/Socket Manifold: FM15410SK/SK – 15mm Pipe x 4 – 10mm FM15410SK/SP – 15mm Pipe x 4 – 10mm FM15210SK/SK – 15mm Pipe x 2 – 10mm FM15210SK/SP – 15mm Pipe x 2 – 10mm FM22410SK/SK – 22mm Pipe x 4 – 10mm FM22410SK/SP – 22mm Pipe x 4 – 10mm FM22210SK/SK – 22mm Pipe x 2 – 10mm FM22210SK/SP – 22mm Pipe x 2 – 10mm FM22415SK/SK – 22mm Pipe x 4 – 15mm FM22415SK/SP – 22mm Pipe x 4 – 15mm FM22215SK/SK – 22mm Pipe x 2 – 15mm FM22215SK/SP – 22mm Pipe x 2 – 15mm Straight Tap Connector: FTC1512 – 15mm x ½” FTC1534 – 15mm x ¾” FTC2234 – 22mm x ¾” Bent Tap Connector: FBC1512 – 15mm x ½” Blue Collet Clip (Cold Water Use): FCB10 – 10mm FCB15 – 15mm FCB22 – 22mm FCB28 – 28mm Red Collet Clip (Hot Water Use): FCR10 – 10mm FCR15 – 15mm FCR22 – 22mm FCR28 – 28mm Blue Polybutylene Pipe Insert: FPI10 – 10mm FPI15 – 15mm FPI22 – 22mm FPI28 – 28mm White PE-X Pipe Insert: FXI10 – 10mm FXI15 – 15mm FXI22 – 22mm FXI28 – 28mm

Approval Holder:

FloPlast Ltd

Company Name

FloPlast Ltd

Address

Eurolink Business Park Castle road Sittingbourne

Postcode

ME20 3FP

Country

United Kingdom

Phone

01795431731

General Email

henyb@floplast.co.uk

View All Listings by this Company

Manufacturer:

FloPlast Ltd

Company Name

FloPlast Ltd

Address

Eurolink Business Park Castle road Sittingbourne

Postcode

ME20 3FP

Country

United Kingdom

Phone

01795431731

General Email

henyb@floplast.co.uk

View All Listings by this Company

Range of copper solder ring fittings for use with copper tube. For above ground use only. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101804

Size:

SEE MODEL

Marking:

JT (brand logo) and size on body (8mm models) JT (brand logo), size, WRAS and EN1254 on body (all other sizes)

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Equal Diameter Straighter: SRC-08: 8mm. SRC-10: 10mm. SRC-12: 12mm. SRC-15: 15mm. SRC-22: 22mm. SRC-28: 28mm. SRC-35: 35mm. SRC-42: 42mm. SRC-54: 54mm. Straighter without groove: SRCS-15: 15mm. SRCS-22: 22mm. SRCS-28: 28mm. SRCS-35: 35mm. SRCS-42: 42mm. SRCS-54: 54mm. Reducing Straighter: SRRC-1008: 10-08mm. SRRC-1508: 15-08mm. SRRC-1510: 15-10mm. SRRC-1512: 15-12mm. SRRC-2215: 22-15mm. SRRC-2815: 28-15mm. SRRC-2822: 28-22mm. SRRC-3522: 35-22mm. SRRC-3528: 35-28mm. SRRC-4222: 42-22mm. SRRC-4228: 42-28mm. SRRC-4235: 42-35mm. SRRC-5435: 54-35mm. SRRC-5442: 54-42mm. Socket straighter: SRFR-1008: 10-08mm. SRFR-1208: 12-08mm. SRFR-1210: 12-10mm. SRFR-1508: 15-08mm. SRFR-1510: 15-10mm. SRFR-1512: 15-12mm. SRFR-2215: 22-15mm. SRFR-2815: 28-15mm. SRFR-2822: 28-22mm. SRFR-3515: 35-15mm. SRFR-3522: 35-22mm. SRFR-3528: 35-28mm. SRFR-4215: 42-15mm. SRFR-4222: 42-22mm. SRFR-4228: 42-28mm. SRFR-4235: 42-35mm. SRFR-5415: 54-15mm. SRFR-5422: 54-22mm. SRFR-5428: 54-28mm. SRFR-5435: 54-35mm. SRFR-5442: 54-42mm. 90° Elbow: SRE-08: 8mm. SRE-10: 10mm. SRE-15: 15mm. SRE-22: 22mm. SRE-28: 28mm. SRE-35: 35mm. SRE-42: 42mm. SRE-54: 54mm. 45° Elbow: SRE/45-10: 10mm. SRE/45-15: 15mm. SRE/45-22: 22mm. SRE/45-28: 28mm. SRE/45-35: 35mm. SRE/45-42: 42mm. SRE/45-54: 54mm. 90°Socket Elbow: SRES-10: 10 mm. SRES-15: 15mm. SRES-22: 22mm. SRES-28: 28mm. SRES-35: 35mm. SRES-42: 42mm. SRES-54: 54mm. 45°Socket Elbow: SRES/45-10: 10mm. SRES/45-15: 15mm. SRES/45-22: 22mm. SRES/45-28: 28mm. SRES/45-35: 35mm. SRES/45-42: 42mm. SRES/45-54: 54mm. Equal Diameter Tee: SRET-08: 8mm. SRET-10: 10mm. SRET-12: 12mm. SRET-15: 15mm. SRET-22: 22mm. SRET-28: 28mm. SRET-35: 35mm. SRET-42: 42mm. SRET-54: 54mm. Reducing Tee: SRRT-101015: 10x10x15mm. SRRT-151010: 15x10x10mm. SRRT-151015: 15x10x15mm. SRRT-151508: 15x15x08mm. SRRT-151510: 15x15x10mm. SRRT-151512: 15x15x12mm. SRRT-151522: 15x15x22mm. SRRT-221515: 22x15x15mm. SRRT-221522: 22x15x22mm. SRRT-222210: 22x22x10mm. SRRT-222215: 22x22x15mm. SRRT-222228: 22x22x28mm. SRRT-281515: 28x15x15mm. SRRT-281522: 28x15x22mm. SRRT-281528: 28x15x28mm. SRRT-282215: 28x22x15mm. SRRT-282222: 28x22x22mm. SRRT-282228: 28x22x28mm. SRRT-282815: 28x28x15mm. SRRT-282822: 28x28x22mm. SRRT-282835: 28x28x35mm. SRRT-352222: 35x22x22mm. SRRT-352235: 35x22x35mm. SRRT-352822: 35x28x22mm. SRRT-352828: 35x28x28mm. SRRT-352835: 35x28x35mm. SRRT-353515: 35x35x15mm. SRRT-353522: 35x35x22mm. SRRT-353528: 35x35x28mm. SRRT-422828: 42x28x28mm. SRRT-422842: 42x28x42mm. SRRT-423535: 42x35x35mm. SRRT-423542: 42x35x42mm. SRRT-424215: 42x42x15mm. SRRT-424222: 42x42x22mm. SRRT-424228: 42x42x28mm. SRRT-424235: 42x42x35mm. SRRT-544254: 54x42x54mm. SRRT-545415: 54x54x15mm. SRRT-545422: 54x54x22mm. SRRT-545428: 54x54x28mm. SRRT-545435: 54x54x35mm. SRRT-545442: 54x54x42mm. Cap: SREC-08: 8mm. SREC-10: 10mm. SREC-15: 15mm. SREC-22: 22mm. SREC-28: 28mm. SREC-35: 35mm. SREC-42: 42mm. SREC-54: 54mm.

Approval Holder:

Ningbo Jintian Copper Tube Co Ltd

Company Name

Ningbo Jintian Copper Tube Co Ltd

Address

No.1 ChengXi West Road, CiCheng, NingBo

Country

China

Phone

0086 574 8757 4425

General Email

audrey@jtcorp.com.cn

View All Listings by this Company

Range of copper end feed fittings for use with copper tube. For above and below ground use. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101805

Size:

SEE MODEL

Marking:

6mm & 8mm = JT (brand logo) and size on body. All other sizes = JT (brand logo) on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Straight Coupler: EFC-08: 8mm. EFC-10: 10mm. EFC-12: 12mm. EFC-15: 15mm. EFC-L-15: 15mm. EFC-18: 18mm. EFC-22: 22mm. EFC-L-22: 22mm. EFC-28: 28mm. EFC-L-28: 28mm. EFC-35: 35mm. EFC-42: 42mm. EFC-54: 54mm. EFC-67: 67mm. EFC-76: 76mm. EFC-108: 108mm. EFC-133: 133mm. EFC-159: 159mm. Slip Coupler: EFCS-15: 15mm. EFCS-18: 18mm. EFCS-22: 22mm. EFCS-28: 28mm. EFCS-35: 35mm. EFCS-42: 42mm. EFCS-54: 54mm. EFCS-67: 67mm. EFCS-76: 76mm. EFCS-108: 108mm. EFCS-133: 133mm. EFCS-159: 159mm. Reducing Coupler: EFRC-1008: 10-08mm. EFRC-1508: 15-08mm. EFRC-1510: 15-10mm. EFRC-1512: 15-12mm. EFRC-2215: 22-15mm. EFRC-L- 2215: 22-15mm. EFRC-2815: 28-15mm. EFRC-L- 2815: 28-15mm. EFRC-2822: 28-22mm. EFRC-3515: 35-15mm. EFRC-3522: 35-22mm. EFRC-3528: 35-28mm. EFRC-4215: 42-15mm. EFRC-4222: 42-22mm. EFRC-4228: 42-28mm. EFRC-4235: 42-35mm. EFRC-5415: 54-15mm. EFRC-5422: 54-22mm. EFRC-5428: 54-28mm. EFRC-5435: 54-35mm. EFRC-5442: 54-42mm. Fitting Reducer: EFFR-1008: 10-08mm. EFFR-1208: 12-08mm. EFFR-1210: 12-10mm. EFFR-1508: 15-08mm. EFFR-1510: 15-10mm. EFFR-1512: 15-12mm. EFFR-2215: 22-15mm. EFFR-L-2215: 22-15mm. EFFR-2815: 28-15mm. EFFR-2822: 28-22mm. EFFR-3515: 35-15mm. EFFR-3522: 35-22mm. EFFR-3528: 35-28mm. EFFR-4215: 42-15mm. EFFR-4222: 42-22mm. EFFR-4228: 42-28mm. EFFR-4235: 42-35mm. EFFR-5415: 54-15mm. EFFR-5422: 54-22mm. EFFR-5428: 54-28mm. EFFR-5435: 54-35mm. EFFR-5442: 54-42mm. EFFR-6715: 67-15mm. EFFR-6722: 67-22mm. EFFR-6728: 67-28mm. EFFR-6735: 67-35mm. EFFR-6742: 67-42mm. EFFR-6754: 67-54mm. EFFR-7628: 76-28mm. EFFR-7635: 76-35mm. EFFR-7642: 76-42mm. EFFR-7654: 76-54mm. EFFR-7667: 76-67mm. EFFR-10835: 108-35mm. EFFR-10842: 108-42mm. EFFR-10854: 108-54mm. EFFR-10867: 108-67mm. EFFR-10876: 108-76mm. Long Fitting Reducer with long tail: EFFRL-1508: 15-08mm. EFFRL-1510: 15-10mm. 90° Long Street Elbow: EFESL-12: 12 mm. EFESL-15: 15 mm. EFESL-18: 18mm. EFESL-22: 22 mm. EFESL-28: 28mm. EFESL-35: 35mm. EFESL-42: 42mm. EFESL-54: 54mm. EFESL-67: 67mm. EFESL-76: 76mm. EFESL-108: 108mm. EFESL-133: 133mm. EFESL-159: 159mm. 90° Long Elbow: EFE-L-12: 12 mm. EFE-L-15: 15 mm. EFE-L-18: 18mm. EFE-L-22: 22 mm. EFE-L-28: 28mm. EFE-L-35: 35mm. EFE-L-42: 42mm. EFE-L-54: 54mm. EFE-L-67: 67mm. EFE-L-76: 76mm. EFE-L-108: 108mm. EFE-L-133: 133mm. EFE-L-159: 159mm. 90° Elbow: EFE-06: 6mm. EFE-08: 8mm. EFE-10: 10mm. EFE-15: 15mm. EFE-L-15: 15mm. EFE-18: 18mm. EFE-22: 22mm. EFE-L-22: 22mm. EFE-28: 28mm. EFE-L-28: 28mm. EFE-35: 35mm. EFE-42: 42mm. EFE-54: 54mm. EFE-67: 67mm. EFE-76: 76mm. EFE-108: 108mm. EFE-133: 133mm. EFE-159: 159mm. 45° Elbow: EFE/45-8: 8mm. EFE/45-10: 10mm. EFE/45-15: 15mm. EFE-L/45-15: 15mm. EFE/45-18: 18mm. EFE/45-22: 22mm. EFE-L/45-22: 22mm. EFE/45-28: 28mm. EFE-L/45-28: 28mm. EFE/45-35: 35mm. EFE/45-42: 42mm. EFE/45-54: 54mm. EFE/45-67: 67mm. EFE/45-76: 76mm. EFE/45-108: 108mm. EFE/45-159: 159mm. 90° Street Elbow: EFES-8: 8mm. EFES-10: 10 mm. EFES-15: 15mm. EFES-L-15: 15mm. EFES-18: 18mm. EFES-22: 22mm. EFES-L-22: 22mm. EFES-28: 28mm. EFES-L-28: 28mm. EFES-35: 35mm. EFES-42: 42mm. EFES-54: 54mm. EFES-67: 67mm. EFES-76: 76mm. EFES-108: 108mm. EFES-133: 133mm. EFES-159: 159mm. 45° Street Elbow: EFES/45-8: 8mm. EFES/45-10: 10 mm. EFES/45-15: 15mm. EFES/45-18: 18mm. EFES/45-22: 22mm. EFES/45-28: 28mm. EFES/45-35: 35mm. EFES/45-42: 42mm. EFES/45-54: 54mm. EFES/45-133: 133mm. EFES/45-159: 159mm. Equal Tee: EFET-06: 6mm. EFET-08: 8mm. EFET-10: 10mm. EFET-12: 12mm. EFET-15: 15mm. EFET-L-15: 15mm. EFET-18: 18mm. EFET-22: 22mm. EFET-L-22: 22mm. EFET-28: 28mm. EFET-L-28: 28mm. EFET-35: 35mm. EFET-42: 42mm. EFET-54: 54mm. EFET-67: 67mm. EFET-76: 76mm. EFET-108: 108mm. EFET-133: 133mm. EFET-159: 159mm. Reducing Tee: EFRT-101015: 10x10x15mm. EFRT-151010: 15x10x10mm. EFRT-151015: 15x10x15mm. EFRT-151508: 15x15x08mm. EFRT-151510: 15x15x10mm. EFRT-151512: 15x15x12mm. EFRT-151522: 15x15x22mm. EFRT-221515: 22x15x15mm. EFRT-221522: 22x15x22mm. EFRT-L-221522: 22x15x22mm. EFRT-222210: 22x22x10mm. EFRT-222215: 22x22x15mm. EFRT-L-222215: 22x22x15mm. EFRT-222228: 22x22x28mm. EFRT-281515: 28x15x15mm. EFRT-281522: 28x15x22mm. EFRT-281528: 28x15x28mm. EFRT-282215: 28x22x15mm. EFRT-282222: 28x22x22mm. EFRT-282228: 28x22x28mm. EFRT-282815: 28x28x15mm. EFRT-282822: 28x28x22mm. EFRT-282835: 28x28x35mm. EFRT-352222: 35x22x22mm. EFRT-352235: 35x22x35mm. EFRT-352822: 35x28x22mm. EFRT-352828: 35x28x28mm. EFRT-352835: 35x28x35mm. EFRT-353515: 35x35x15mm. EFRT-353522: 35x35x22mm. EFRT-353528: 35x35x28mm. EFRT-422828: 42x28x28mm. EFRT-422842: 42x28x42mm. EFRT-423535: 42x35x35mm. EFRT-423542: 42x35x42mm. EFRT-424215: 42x42x15mm. EFRT-424222: 42x42x22mm. EFRT-424228: 42x42x28mm. EFRT-424235: 42x42x35mm. EFRT-544254: 54x42x54mm. EFRT-545415: 54x54x15mm. EFRT-545422: 54x54x22mm. EFRT-545428: 54x54x28mm. EFRT-545435: 54x54x35mm. EFRT-545442: 54x54x42mm. EFRT-675467: 67x54x67mm. EFRT-676728: 67x67x28mm. EFRT-676735: 67x67x35mm. EFRT-676742: 67x67x42mm. EFRT-676754: 67x67x54mm. EFRT-767628: 76x76x28mm. EFRT-767635: 76x76x35mm. EFRT-767642: 76x76x42mm. EFRT-767654: 76x76x54mm. EFRT-767667: 76x76x67mm. EFRT-10810854: 108x108x54mm. EFRT-10810867: 108x108x67mm. EFRT-10810876: 108x108x76mm. EFRT-13313354: 133x133x54mm. EFRT-133133108: 133x133x108mm. EFRT-15915954: 159x159x54mm. EFRT-159159133: 159x159x133mm. Full crossover: EFFCO-10: 10 mm. EFFCO-12: 12 mm. EFFCO-15: 15 mm. EFFCO-18: 18mm. EFFCO-22: 22 mm. EFFCO-28: 28mm. Partial Crossover: EFPCO-10: 10mm. EFPCO-15: 15mm. EFPCO-18: 18mm. EFPCO-22: 22mm. End cap: EFEC-08: 8mm. EFEC-10: 10mm. EFEC-15: 15mm. EFEC-18: 18mm. EFEC-22: 22mm. EFEC-28: 28mm. EFEC-35: 35mm. EFEC-42: 42mm. EFEC-54: 54mm. EFEC-67: 67mm. EFEC-76: 76mm. EFEC-108: 108mm. EFEC-133: 133mm. EFEC-159: 159mm. Imp coupler: EFCOI-15: 15mm x 1/2”. EFCOI-15: 15mm x 3/4”. EFCOI-22: 22mm x 3/4”. EFCOI-28: 28mm x 1”. EFCOI-35: 35mm x 1 1/4”. EFCOI-42: 42mm x 1 1/2”. EFCOI-54: 54mm x 1 3/4”. EFCOI-67: 67mm x 2”. EFCOI-76: 76mm x 3”. EFCOI-108: 108mm x 4”. Male Adapter: EFMA-15 1/4: 15mm x 1/4”. EFMA-15 3/8: 15mm x 3/8”. EFMA-15 2/1: 15mm x 1/2”. EFMA-15 3/4: 15mm x 3/4”. EFMA-22 3/4: 22mm x 3/4”. EFMA-22 1: 22mm x 1”. EFMA-28 1: 28mm x 1”. EFMA-35 1 1/4: 35mm x 1 1/4”. EFMA-42 1 1/2: 42mm x 1 1/2”. EFMA-54 2: 54mm x 2”. EFMA-67 2 1/2: 67mm x 2 1/2”. EFMA-76 3: 76mm x 3”. Female Adapter: EFFA-15 1/4: 15mm x 1/4”. EFFA-15 3/8: 15mm x 3/8”. EFFA-15 1/2: 15mm x 1/2”. EFFA-22 3/4: 22mm x 3/4”. EFFA-28 1: 28mm x 1”. EFFA-35 1 1/4: 35mm x 1 1/4”. EFFA-42 1 1/2: 42mm x 1 1/2”. EFFA-54 2: 54mm x 2”. Straight Tap connector: EFSTC-15 1/2: 15mm x 1/2”. EFSTC-15 3/4: 15mm x 3/4”. EFSTC-22 3/4: 22mm x 3/4”. EFSTC-28 1: 28mm x 1”. EFSTC-22 1: 22mm x 1”. Bent tap connector: EFBTC-15 1/2: 15mm x 1/2”. EFBTC-15 3/4: 15mm x 3/4”. EFBTC-22 3/4: 22mm x 3/4”. EFBTC-28 1: 28mm. x1”. EFBTC-22 1: 22mm x 1”. Straight Tap connector (With Gasket): EFSCU-15 1/2: 15mm x 1/2”. EFSCU-15 3/4: 15mm x 3/4”. EFSCU-22 3/4: 22mm x 3/4”. EFSCU-22 1: 22mm x 1”. EFSCU-28 1: 28mm x 1”. Bent tap connector (with Gasket): EFBCU-15 1/2: 15mm x 1/2”. EFBCU-15 3/4: 15mm x 3/4”. EFBCU-22 3/4: 22mm x 3/4”. EFBCU-22 1: 22mm x 1”. EFBCU-28 1: 28mm x 1”. Straight cylinder union: EFSCC-151/2: 15mm x 1/2”. EFSCC-153/4: 15mm x 3/4”. EFSCC-223/4: 22mm x 3/4”. EFSCC-221: 22mm x 1”. EFSCC-281: 28mm x 1”. Models added April 2021: Fitting Reducer: EFFR-L-1510, 15-10mm EFFR-L-2822, 28-22mm 45° Elbow: EFE/45-133, 133mm End cap: EFEC-L-15, 15mm EFEC-L-22, 22mm

Approval Holder:

Ningbo Jintian Copper Tube Co Ltd

Company Name

Ningbo Jintian Copper Tube Co Ltd

Address

No.1 ChengXi West Road, CiCheng, NingBo

Country

China

Phone

0086 574 8757 4425

General Email

audrey@jtcorp.com.cn

View All Listings by this Company