Range of hot pressed moulded GRP sectional cold water storage cisterns. Larger cisterns are fitted with PVC roof supports and are supplied with stainless steel ladders, tie rods, braces and hatches. Cold water use only.

Section:

0135 Cisterns

Section Subtitle:

Cold-water storage with cover or roof - plastic, sectional. Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.

WRAS Approval Number:

2012027

Size:

SEE MODEL

Marking:

Mitsubishi chemical infratec, capacity & product info on label on body. Mitsubishi chemical infratec on lid.

Installation Requirements:

R001 R270 R280

Expiry date:

31/12/2025

Model:

Hishitank GE & GSE 1000 Litres – 430,000 Litres

Product Images

Approval Holder:

Mitsubishi Chemical Infratec Co., Ltd.

Company Name

Mitsubishi Chemical Infratec Co., Ltd.

Address

1-1, Marunouchi 1-Chome, Chiyoda-ku, Tokyo 100-8251

Country

Japan

Phone

+81-80-2683-2994

General Email

yusuke.nakao.ma@mcgc.com

View All Listings by this Company

M100 & M100-B30 ranges of hot press moulded GRP sectional, pre-insulated, cold water storage cisterns. The cisterns are sealed with butyl rubber and are supplied with a float operated valve (gunmetal or DZR brass body depending on size). The rooves are fitted with one or more sealed manhole access points, which can also be fitted at low level if required. Larger cisterns are fitted with stainless steel ties, GRP roof struts & GRP ladders. The M100-B30 models are supplied with a screened tank overflow, a screened tank breather, two-way expansion pipe tee piece, tank lid adaptor and tank connections. Models can also be supplied with access doors. Maximum working pressure of supplied inlet valve: Gunmetal body inlet valves 5.0 bar, DZR brass body inlet valves 10.0 bar. Cold water use only.

Section:

0135 Cisterns

Section Subtitle:

Cold-water storage with cover or roof - plastic, sectional. Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.

WRAS Approval Number:

2305074

Size:

1,000 litres to 10,000,000 litres To inlet valve: ½” BSP (M) - 2” BSP (M) (Gunmetal or DZR brass body valve). 2½” BSP (M) - 3” BSP (M) (DZR brass body valve only).

Marking:

BALMORAL TANKS, WRAS, capacity and other product information on adhesive labels on body.

Installation Requirements:

R001 R270 R280 R350

Expiry date:

31/05/2028

Model:

M100 & M100-B30.

Product Images

Approval Holder:

Balmoral Tanks Ltd.

Company Name

Balmoral Tanks Ltd.

Address

Llantrisant Business Park, Llantrisant, Pontyclun

Postcode

CF72 8LF

Country

United Kingdom

Phone

01443 235 170

General Email

watertanksales@balmoral.co.uk

View All Listings by this Company

Manufacturer:

Balmoral Tanks Ltd.

Company Name

Balmoral Tanks Ltd.

Address

Llantrisant Business Park, Llantrisant, Pontyclun

Postcode

CF72 8LF

Country

United Kingdom

Phone

01443 235 170

General Email

watertanksales@balmoral.co.uk

View All Listings by this Company

Range of sectional stainless steel storage cistern with lid. Maximum operating temperature 60°C.

Section:

0140 Cisterns

Section Subtitle:

Cold water storage and lids, metal.

WRAS Approval Number:

2205323

Size:

1000L – 100,0000L

Marking:

Liangyu company logo, capacity and website on adhesive label on body

Installation Requirements:

R001

Expiry date:

31/05/2027

Model:

LYSSWT-01

Product Images

Approval Holder:

Liangyu Hitech Technical Services LLC.

Company Name

Liangyu Hitech Technical Services LLC.

Address

Office 2003/2004 Churchill Executive Tower Business BAy Dubai

Country

United Arab Emirates

View All Listings by this Company

Range of sectional stainless steel storage cistern with lid. Maximum operating temperature 60°C.

Section:

0140 Cisterns

Section Subtitle:

Cold water storage and lids, metal.

WRAS Approval Number:

2205353

Size:

1000L – 100,0000L

Marking:

Liangyu (Liaoning) company logo, capacity and website on adhesive label on body

Installation Requirements:

R001

Expiry date:

31/05/2027

Model:

LYSSWT-01

Approval Holder:

Liangyu (Liaoning) International Trade Co., Ltd

Company Name

Liangyu (Liaoning) International Trade Co., Ltd

Address

Gate 2, No. 400-34, Zhihui Second Street, Hunnan District, Shenyang City, Liaoning Province

View All Listings by this Company

Range of open or closed top, circular, sectional, cold water storage cisterns with corrugated & galvanised steel bodies and an EPDM liner.

Section:

0220 Cisterns - non-wholesome use

Section Subtitle:

Cold water storage with cover or roof, metal, sectional.

WRAS Approval Number:

2007053

Size:

2,140 litres – 1,381,210 litres

Marking:

Evenproducts, model, installation date, nominal capacity, company address, serial number and WRAS approval number on adhesive label on side of tank.

Installation Requirements:

R001 R270 R280 R350 R430

Expiry date:

31/07/2025

Proviso:

If connected to a mains water supply suitable backflow protection must be installed

Model:

TK06, TK09, TK12, TK15, TK18, TK21, TK24, TK27, TK30, TK33, TK36, TK39, TK42, TK45, TK48, TK51, TK54, TK57, TK60, TK63, TK66, TK69, TK72, TK75, TK78, TK81, TK84, TK87, TK90, TK93, TK96, TK99, TK102, TK105, TK108, TK111, TK114, TK117, TK120, TK123, TK126, TK129, TK132, TK135, TK138, TK141, TK144, TK147, TK150. Available with 2, 3, 4, 5, 6, 7 or 8 panels high.

Product Images

Approval Holder:

Evenproducts Ltd

Company Name

Evenproducts Ltd

Address

View All Listings by this Company

Manufacturer:

Evenproducts Ltd

Company Name

Evenproducts Ltd

Address

View All Listings by this Company

‘Comisa’ range of brass bodied press-fit and threaded fittings for use with `Comisa’ (PE-RT/AL/PE-LMD) multi-layer pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2111309

Size:

See model

Marking:

Fittings: Comisa logo, DVGW, size, made in Italy on body. Pipe: Comisa, size, pressure, date of manufacture (DD.MM.YY) (HH.MM) and other technical information on body. Date Code: 111=first four months 11=second four months 1=last four months J=2020 K=2021

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

Press fittings: Straight coupler: 87.10.160: MU0870000160 16 x 2, 87.10.200: MU0870000200 20 x 2, 87.10.260: MU0870000260 26 x 3. Reducing coupling double: 87.11.201: MU0870R20160 20 x 2 - 16 x 2, 87.11.260: MU0870R26160 26 x 3 - 16 x 2, 87.11.263: MU0870R26200 26 x 3 - 20 x 2. Male Coupling: 87.12.150: MU0871003160 16 x 2 - ⅜”, 87.12.160 : MU0871005160 16 x 2 - ½”, 87.12.164: MU0871007160 16 x 2 - ¾”, 87.12.200: MU0871005200 20 x 2 - ½”, 87.12.201: MU0871007200 20 x 2 - ¾”, 87.12.255: MU0871005260 26 x 3 - ½”, 87.12.260: MU0871007260 26 x 3 - ¾”, 87.12.261: MU0871010260 26 x 3 - 1”. Female Coupling: 87.13.160 : MU0880005160 16 x 2 - ½”, 87.13.164: MU0880007160 16 x 2 - ¾”, 87.13.200: MU0880005200 20 x 2 - ½”, 87.13.201: MU0880007200 20 x 2 - ¾”, 87.13.255: MU0880005260 26 x 3 - ½”, 87.13.260: MU0880007260 26 x 3 - ¾”, 87.13.261: MU0880010260 26 x 3 - 1”. Elbow 90°: 87.14.160: MU0860000160 16 x 2, 87.14.200: MU0860000200 20 x 2, 87.14.260: MU0860000260 26 x 3. Male Elbow 90°: 87.16.160: MU0861005160 16 x 2 - ½”, 87.16.164: MU0861007160 16 x 2 - ¾”, : MU0861003160 16 x ⅜”, 87.16.200: MU0861005200 20 x 2 - ½”, 87.16.201: MU0861007200 20 x 2 - ¾”, 87.16.260: MU0861007260 26 x 3 - ¾”, 87.16.265: MU0861010260 26 x 3 - 1”. Female Elbow 90°: 87.17.159: MU08620H5160 - 16 x 2 - ½” 87.17.160: MU0862005160 - 16 x 2 - ½” 87.17.164: MU0862007160 - 16 x 2 - ¾” 87.17.200: MU0862005200 - 20 x 2 - ½” 87.17.201: MU0862007200 - 20 x 2 - ¾” 87.17.260: MU0862007260 - 26 x 3 - ¾” 87.17.265: MU0862010260 - 26 x 3 - 1” Tee: 87.18.160: MU0850000160 - 16 x 2 87.18.200: MU0850000200 - 20 x 2 87.18.260: MU0850000260 - 26 x 3 Tee reduced middle section: 87.19.201: MU085300BAB0 - 20 x 2 - 16 x 2 - 20 x 2 87.19.261: MU085300DAD0 - 26 x 3 - 16 x 2 - 26 x 3 87.19.263: MU085300DBD0 - 26 x 3 - 20 x 2 - 26 x 3 Reducing Tee: 87.20.202: MU085300BAA0 - 20 x 2 - 16 x 2 - 16 x 2 87.20.206: MU085300BBA0 - 20 x 2 - 20 x 2 - 16 x 2 87.20.260: MU085300DAB0 - 26 x 3 - 16 x 2 - 20 x 2 87.20.264: MU085300DBA0 - 26 x 3 - 20 x 2 - 16 x 2 87.20.265: MU085300DBB0 - 26 x 3 - 20 x 2 - 20 x 2 87.20.269: MU085300DDA0 - 26 x 3 - 26 x 3 - 16 x 2 87.20.270: MU085300DDB0 - 26 x 3 - 26 x 3 - 20 x 2 Tee enlarged middle section: 87.21.161: MU085300ABA0 - 16 x 2 - 20 x 2 - 16 x 2 87.21.201: MU085300BDB0 - 20 x 2 - 26 x 3 - 20 x 2 87.21.260: MU085300DED0 - 26 x 3 - 32 x 3 - 26 x 3 Male Tee: 87.22.160: MU0851005160 - 16 x 2 - ½” - 16 x 2 87.22.200: MU0851005200 - 20 x 2 - ½” - 20 x 2 87.22.201: MU0851007200 - 20 x 2 - ¾” - 20 x 2 87.22.260: MU0851005260 - 26 x 3 - ½” - 26 x 3 87.22.261: MU0851007260 - 26 x 3 - ¾” - 26 x 3 87.22.262: MU0851010260 - 26 x 3 - 1” - 26 x 3 Female Tee: 87.23.160: MU0852005160 - 16 x 2 - ½” - 16 x 2 87.23.200: MU0852005200 - 20 x 2 - ½” - 20 x 2 87.23.201: MU0852007200 - 20 x 2 - ¾” - 20 x 2 87.23.260: MU0852005260 - 26 x 3 - ½” - 26 x 3 87.23.261: MU0852526200 - 26 x 3 - ½” - 20 x 2 87.23.263: MU0852007260 - 26 x 3 - ¾” - 26 x 3 Wallplate elbow-short 90°: 87.24.145: MU0863003160 - 16 x 2 - ⅜” h. 39mm 87.24.160: MU0863005160 - 16 x 2 - ½” h. 39mm 87.24.161: MU08630H5160 - 16 x 2 - ½” h. 52mm 87.24.200: MU0863005200 - 20 x 2 - ½” h. 52mm 87.24.201: MU0863007200 - 20 x 2 - ¾” h. 52 mm 87.24.260: MU0863007260 - 26 x 3 - ¾” h. 52mm Wallplate elbow-double short 90°: 87.25.160: MU0864005160 - 16 x 2 - ½” - 16 x 2 h. 52mm 87.25.200: MU0864005200 - 20 x 2 - ½” - 20 x 2 h. 52mm Wallplate elbow-long 90°: 87.26.160: MU0863L05160 - 16 x 2 ½” h. 78mm 87.26.200: MU0863L05200 - 20 x 2 ½” h. 78mm Wallplate elbow for series connections: 87.26.205: MU0865005160 - 16 x 2 - ½” F - 16 x 2 - h 52 mm 87.26.210: MU0865005200 - 20 x 2 - ½” F - 20 x 2 - h 52 mm Wallplate elbow U-shaped 180°: 87.27.216: MU0884005160 - 16 x 2 - ½” 87.27.220: MU0884005200 - 20 x 2 - ½” Wallplate elbow U-shaped: 87.27.160: MU0887005160 - 16 x 2 - ½” - 16 x 2 87.27.200: MU0887005200 - 20 x 2 - ½” - 20 x 2 Cistern connector ¾” M x ½” F: 87.33.105: MU0867005160 - 16 x 2 - h 78 mm 87.33.115: MU0867005200 - 20 x 2 - h 78 mm WC Cistern Elbow: 87.28.160: MU0856005160 - 16 x 2 - ½” 87.28.200: MU0856005200 - 20 x 2 - ½” WC Cistern T-Piece: 87.29.160: MU0857005160 - 16 x 2 - ½” - 16 x 2 87.29.200: MU0857005200 - 20 x 2 - ½” - 20 x 2 Elbow 45°: 87.30.260: MU0866000260 - 26 x 3 Elbow 45°, Stop end: 87.31.160: MU0881000160 - 16 x 2 87.31.200: MU0881000200 - 20 x 2 87.31.260: MU0881000260 - 26 x 3 Male angle screw connector 90°: 87.34.160: MU0868005160 - 16 x 2 87.34.200: MU0868005200 - 20 x 2 - ½” 87.34.201: MU0868007200 - 20 x 2 - ¾” Female angle screw connector 90°: 87.35.160: MU0869005160 - 16 x 2 - ½” 87.35.200: MU0869005200 - 20 x 2 - ½” 87.35.201: MU0869007200 - 20 x 2 - ¾” Female screw fitting, flat seal: 87.36.160: MU0883005160 - 16 x 2 - ½” 87.36.161: MU0883007160 - 16 x 2 - ¾” 87.36.200: MU0883005200 - 20 x 2 - ½” 87.36.201: MU0883007200 - 20 x 2 - ¾” 87.36.260: MU0883007260 - 26 x 3 - ¾” 87.36.261: MU0883010260 - 26 x 3 - 1” Male screw fitting, tapered: 87.37.160: MU0873005160 - 16 x 2 - ½” 87.37.161: MU0873007160 - 16 x 2 - ¾” 87.37.200: MU0873005200 - 20 x 2 - ½” 87.37.201: MU0873007200 - 20 x 2 - ¾” 87.37.260: MU0873007260 - 26 x 3 - ¾” 87.37.261: MU0873010260 - 26 x 3 - 1” Connecting screw fitting with Euro cone raw: 87.39.160: MU087500716L 16 x 2 - ¾” 87.39.200: MU087500720L 20 x 2 - ¾” 87.39.260: MU087501026L 26 x 3 - 1” Screw connector, flat seal: 87.42.140: MU087600316L 16 x 2 - ⅜” 87.42.150: MU087600516L 16 x 2 - ½” 87.42.160: MU087600716L 16 x 2 - ¾” 87.42.170: MU087600520L 20 x 2 - ½” 87.42.200: MU087600720L 20 x 2 - ¾” 87.42.260: MU087601026L 26 x 3 - 1” : MU087600726L 26 x ¾" Tee By-pass: 87.49.010: MU0888000160 - 16 x 16 x 16 87.49.015: MU088800BAA0 - 20 x 16 x 16 87.49.020: MU088800BAB0 - 20 x 16 x 20 87.49.025: MU0888000200 - 20 x 20 x 20 NP Nipples press + insert: 87.47.055: MU0886016120 - 16x2 - 12 mm Nipples press + insert: 87.47.060: MU0886016150 - 16 x 2 - 15 mm 87.47.070: MU0886020220 - 20 x 2 - 22 mm Elbow press x compression: 87.47.110: MU0858016100 - 16 x 2 -10 mm 87.47.115: MU0858016150 - 16 x 2 -15 mm Quick press connection (2 pieces): 87.50.100 VA0844000160 - 16 x 2 87.50.105 VA0844000200 - 20 x 2 Disaligned tee fittings, on mounting plate, for Multiple conn: 87.54.034: MU0830005160 - 16 x 2 - ½” F - 16 x 2 87.54.035: MU0830005200 - 20 x 2 - ½” F - 20 x 2 Disaligned end fittings, on mounting plate: 87.54.039: MU0831005160 - 16 x 2 - ½” F - 16 x 2 87.54.040: MU0831005200 - 20 x 2 - ½” F - 20 x 2 disaligned fittings: 87.54.032: MU0891005160 - 16 x 2 - ½” F 16 x 2 87.54.033: MU0891005200 - 20 x 2 - ½” F 20 x 2 Wallplate elbow assembled in set: 87.54.005: MU0832005160 - 16 x 2 - ½” 87.54.019: MU0832005200 - 20 x 2 - ½” 87.54.020: MU0832007200 - 20 x 2 - ¾” Wallplate elbow 16 x 2 - ½” h. 52 mm with soundproof elements assembled in set: 87.54.030: MU0833005160 - 16 x 2 ½” Sanitary mounting plate assembled with 2 wallplate elbows, distance 76 mm: 87.54.060: MU0834005160 ½” - 16 x 2 87.54.061: MU0834005200 ½” - 20 x 2 Sanitary mounting plate assembled with 2 wallplate elbows, distance152 mm: 87.54.065: MU0835005160 ½” - 16 x 2 87.54.066: MU0835005200 ½” - 20 x 2 Press elbow swivel nut ½x16: MU0892005160 - 16x½" Press elbow swivel nut ¾x16: MU0892007160 - 16x¾" Press elbow swivel nut ¾x20: MU0892007200 - 20x¾" Press elbow swivel nut ¾x26: MU0892007260 - 26x¾" kit plaster fittings 90 ° - ½ "female 16x2,0 comisa press: MU08590KT010 ½" female 16x2 MU08590KT020 ½"female 20x2 Threaded fittings: Straight coupling: 88.03.415: RM057000016N - 16 x 2 88.03.420: RM057000X16N - 16 x 2 88.03.435: RM057000020N - 20 x 2 Straight reduction: 88.03.855: RM0570R2016N - 20 x 2 - 16 x 2 Male straight coupling ISO 7/2: 88.03.515: RM057100516N - 16 x 2 - ½” 88.03.520: RM05710X516N - 16 x 2 - ½” 88.03.535: RM057100520N - 20 x 2 - ½” 88.03.540: RM057100716N - 16 x 2 - ¾” 88.03.555: RM057100720N - 20 x 2 - ¾” Male straight coupling with O-Ring seal: 88.03.610: RM057200516N - 16 x 2 - ½” 88.03.620: RM05720X516N - 16 x 2 - ½” 88.03.635: RM057200520N - 20 x 2 - ½” Female straight coupling: 88.03.710: RM058000516N - 16 x 2 - ½” 88.03.715: RM05800X516N - 16 x 2 - ½” 88.03.730: RM058000520N - 20 x 2 - ½” 88.03.735: RM058000716N - 16 x 2 - ¾” 88.03.750: RM058000720N - 20 x 2 - ¾” Pressure test plugs: 87.31.605: RM058100016N - 16 x 2 87.31.615: RM058100020N - 20 x 2 Elbow 90°: 88.04.015: RM056000016N - 16 x 2 88.04.020: RM056000X16N - 16 x 2 88.04.035: RM056000020N - 20 x 2 Male elbow 90°: 88.04.115: RM056100516N - 16 x 2 - ½” 88.04.120: RM05610X516N - 16 x 2 - ½” 88.04.135: RM056100520N - 20 x 2 - ½” 88.04.140: RM056100716N - 16 x 2 - ¾” 88.04.155: RM056100720N - 20 x 2 - ¾” Female elbow 90°: 88.04.215: RM056200516N - 16 x 2 - ½” 88.04.220: RM05620X516N - 16 x 2 - ½” 88.04.235: RM056200520N - 20 x 2 - ½” 88.04.240: RM056200716N - 16 x 2 - ¾” 88.04.255: RM056200720N - 20 x 2 - ¾” Elbow with wallplate 90°: 88.04.315: RM056300516N - 16 x 2 - ½” 88.04.320: RM05630X516N - 16 x 2 - ½” 88.04.335: RM056300520N - 20 x 2 - ½” 88.04.350: RM056300716N - 16 x 2 - ¾” 88.04.365: RM056300720N - 20 x 2 - ¾” Tee: 88.04.515: RM055000016N - 16 x 16 x 16 88.04.520: RM055000X16N - 16 x 16 x 16 88.04.535: RM055000020N - 20 x 20 x 20 Reducing Tee: 88.04.558: RM055300BAAN - 20 x 2 - 16 x 2 - 16 x 2 88.04.560: RM055300BABN - 20 x 2 - 16 x 2 - 20 x 2 88.04.566: RM055300BBAN - 20 x 2 - 20 x 2 - 16 x 2 Male Tee: 88.04.715: RM055100516N - 16 x ½” x 16 88.04.720: RM055100716N - 16 x ¾” x 16 88.04.735: RM055100720N - 20 x ¾” x 20 Female Tee: 88.04.615: RM055200516N - 16 x ½” x 16 88.04.620: RM05520X516N - 16 x ½” x 16 88.04.635: RM055200520N - 20 x ½” x 20 88.04.640: RM055200716N - 16 x ¾” x 16 88.04.655: RM055200720N - 20 x ¾” x 20 Nipples press x compression: 87.47.020: MU0877016150 - 16 x 2 - 15 mm 87.47.030: MU0877020220 - 20 x 2 - 22 mm 87.47.035: MU0877026220 - 26 x 3 - 22 mm 87.47.040: MU0877026280 - 26 x 3 - 28 mm 87.47.080: MU0886I20220 - 20 x 2 - 22 mm Ireland 87.47.081: MU0886I26220 - 26 x 3 - 22 mm Ireland : MU0886026220 - 26 x 3 - 22 mm

Product Images

Approval Holder:

Comisa S.p.A

Company Name

Comisa S.p.A

Address

Via Neziole,27 Pisogne (BS)

Postcode

25055

Country

Italy

Phone

+39 0364 896861

General Email

info@comisa.it

View All Listings by this Company

Manufacturer:

Comisa S.p.A

Company Name

Comisa S.p.A

Address

Via Neziole,27 Pisogne (BS)

Postcode

25055

Country

Italy

Phone

+39 0364 896861

General Email

info@comisa.it

View All Listings by this Company

Geberit range of ‘FlowFit’ press Fittings for use with ‘Geberit FlowFit Pipe ML’ and ‘Geberit FlowFit Pipe coils ML’ (insulated and uninsulated) PERT/Al/PERT pipes. The fittings are made from PPSU or lead free silicon bronze. Operating parameters: 16.0 bar@cold water and 10.0 bar@70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312363

Size:

16mm – 75mm.

Marking:

Geberit & size on fittings. Geberit, size, model & material on pipes.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Geberit FlowFit Fittings for use with Geberit FlowFit Pipe ML and Geberit FlowFit Pipe coils ML (insulated and uninsulated) Fittings included on the approval: FlowFit coupling 620.010.00.1 PPSU, d=16mm 620.011.00.1 PPSU, d=20mm 620.012.00.1 PPSU, d=25mm 620.013.00.1 PPSU, d=32mm 620.014.00.1 PPSU, d=40mm 620.015.00.1 PPSU, d=50mm 620.016.00.1 PPSU, d=63mm 620.017.00.1 PPSU, d=75mm FlowFit long coupling 620.020.00.1 CuZn21Si3P, d=16mm 620.021.00.1 CuZn21Si3P, d=20mm 620.022.00.1 CuZn21Si3P, d=25mm 620.023.00.1 CuZn21Si3P, d=32mm 620.024.00.1 CuZn21Si3P, d=40mm 620.025.00.1 CuZn21Si3P, d=50mm FlowFit reducer 620.031.00.1 PPSU, d=20mm, d1=16mm 620.032.00.1 PPSU, d=25mm, d1=16mm 620.042.00.1 PPSU, d=25mm, d1=20mm 620.033.00.1 PPSU, d=32mm, d1=20mm 620.043.00.1 PPSU, d=32mm, d1=25mm 620.034.00.1 PPSU, d=40mm, d1=20mm 620.044.00.1 PPSU, d=40mm, d1=25mm 620.054.00.1 PPSU, d=40mm, d1=32mm 620.035.00.1 PPSU, d=50mm, d1=32mm 620.045.00.1 PPSU, d=50mm, d1=40mm 620.036.00.1 PPSU, d=63mm, d1=40mm 620.046.00.1 PPSU, d=63mm, d1=50mm 620.037.00.1 PPSU, d=75mm, d1=40mm 620.047.00.1 PPSU, d=75mm, d1=50mm 620.057.00.1 PPSU, d=75mm, d1=63mm FlowFit bend 620.062.00.1 45°, PPSU, d=25mm 620.063.00.1 45°, PPSU, d=32mm 620.064.00.1 45°, PPSU, d=40mm 620.065.00.1 45°, PPSU, d=50mm 620.066.00.1 45°, PPSU, d=63mm 620.067.00.1 45°, PPSU, d=75mm 620.070.00.1 90°, PPSU, d=16mm 620.071.00.1 90°, PPSU, d=20mm 620.072.00.1 90°, PPSU, d=25mm 620.073.00.1 90°, PPSU, d=32mm 620.074.00.1 90°, PPSU, d=40mm 620.075.00.1 90°, PPSU, d=50mm 620.076.00.1 90°, PPSU, d=63mm 620.077.00.1 90°, PPSU, d=75mm FlowFit T-piece, equal 620.080.00.1 PPSU, d=16mm 620.081.00.1 PPSU, d=20mm 620.082.00.1 PPSU, d=25mm 620.083.00.1 PPSU, d=32mm 620.084.00.1 PPSU, d=40mm 620.085.00.1 PPSU, d=50mm 620.086.00.1 PPSU, d=63mm 620.087.00.1 PPSU, d=75mm FlowFit T-piece, reduced 620.111.00.1 PPSU, d=20mm, d1=16mm, d2=20mm 620.101.00.1 PPSU, d=20mm, d1=16mm, d2=16mm 620.121.00.1 PPSU, d=16mm, d1=20mm, d2=16mm 620.102.00.1 PPSU, d=25mm, d1=20mm, d2=20mm 620.131.00.1 PPSU, d=20mm, d1=20mm, d2=16mm 620.103.00.1 PPSU, d=32mm, d1=25mm, d2=25mm 620.104.00.1 PPSU, d=40mm, d1=20mm, d2=40mm 620.105.00.1 PPSU, d=50mm, d1=40mm, d2=40mm 620.106.00.1 PPSU, d=63mm, d1=25mm, d2=63mm 620.107.00.1 PPSU, d=75mm, d1=25mm, d2=75mm 620.112.00.1 PPSU, d=25mm, d1=16mm, d2=25mm 620.113.00.1 PPSU, d=32mm, d1=16mm, d2=32mm 620.114.00.1 PPSU, d=40mm, d1=25mm, d2=40mm 620.115.00.1 PPSU, d=50mm, d1=25mm, d2=50mm 620.116.00.1 PPSU, d=63mm, d1=32mm, d2=63mm 620.117.00.1 PPSU, d=75mm, d1=32mm, d2=75mm 620.122.00.1 PPSU, d=25mm, d1=20mm, d2=25mm 620.123.00.1 PPSU, d=32mm, d1=20mm, d2=25mm 620.124.00.1 PPSU, d=40mm, d1=32mm, d2=40mm 620.125.00.1 PPSU, d=50mm, d1=32mm, d2=50mm 620.126.00.1 PPSU, d=63mm, d1=40mm, d2=63mm 620.127.00.1 PPSU, d=75mm, d1=40mm, d2=75mm 620.132.00.1 PPSU, d=20mm, d1=25mm, d2=20mm 620.133.00.1 PPSU, d=32mm, d1=20mm, d2=32mm 620.135.00.1 PPSU, d=50mm, d1=40mm, d2=50mm 620.136.00.1 PPSU, d=63mm, d1=50mm, d2=63mm 620.137.00.1 PPSU, d=75mm, d1=50mm, d2=75mm 620.142.00.1 PPSU, d=25mm, d1=25mm, d2=20mm 620.143.00.1 PPSU, d=32mm, d1=25mm, d2=32mm 620.147.00.1 PPSU, d=75mm, d1=63mm, d2=75mm FlowFit T-piece with female thread 620.150.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=16mm 620.151.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm 620.157.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=20mm 620.152.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=25mm 620.162.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4", d1=25mm 620.153.00.1 CuSn4Zn2PS, d=32mm, Rp=1/2", d1=32mm 620.163.00.1 CuSn4Zn2PS, d=32mm, Rp=3/4", d1=32mm 620.173.00.1 CuSn4Zn2PS, d=32mm, Rp=1", d1=32mm 620.154.00.1 CuSn4Zn2PS, d=40mm, Rp=1/2", d1=40mm 620.164.00.1 CuSn4Zn2PS, d=40mm, Rp=3/4", d1=40mm 620.174.00.1 CuSn4Zn2PS, d=40mm, Rp=1", d1=40mm 620.184.00.1 CuSn4Zn2PS, d=40mm, Rp=1 1/4", d1=40mm 620.155.00.1 CuSn4Zn2PS, d=50mm, Rp=1/2", d1=50mm 620.165.00.1 CuSn4Zn2PS, d=50mm, Rp=3/4", d1=50mm 620.175.00.1 CuSn4Zn2PS, d=50mm, Rp=1", d1=50mm 620.185.00.1 CuSn4Zn2PS, d=50mm, Rp=1 1/2", d1=50mm 620.156.00.1 CuSn4Zn2PS, d=63mm, Rp=1/2", d1=63mm 620.166.00.1 CuSn4Zn2PS, d=63mm, Rp=1", d1=63mm 620.176.00.1 CuSn4Zn2PS, d=63mm, Rp=2", d1=63mm 620.177.00.1 CuSn4Zn2PS, d=75mm, Rp=1", d1=75mm FlowFit adapter to Geberit Mepla: 620.090.00.1 CuZn21Si3P, d=16mm, d1=16mm 620.091.00.1 CuZn21Si3P, d=20mm, d1=20mm 620.092.00.1 CuZn21Si3P, d=25mm, d1=26mm 620.093.00.1 CuZn21Si3P, d=32mm, d1=32mm 620.094.00.1 CuZn21Si3P, d=40mm, d1=40mm 620.095.00.1 CuZn21Si3P, d=50mm, d1=50mm 620.096.00.1 CuZn21Si3P, d=63mm, d1=63mm 620.097.00.1 CuZn21Si3P, d=75mm, d1=75mm FlowFit adapter to Geberit Mapress, with plain end 620.230.00.1 CuSn4Zn2PS, d=16mm, d1=12mm 620.240.00.1 CuSn4Zn2PS, d=16mm, d1=15mm 620.231.00.1 CuSn4Zn2PS, d=20mm, d1=15mm 620.241.00.1 CuSn4Zn2PS, d=20mm, d1=18mm 620.242.00.1 CuSn4Zn2PS, d=20mm, d1=22mm 620.232.00.1 CuSn4Zn2PS, d=25mm, d1=22mm 620.233.00.1 CuSn4Zn2PS, d=32mm, d1=28mm 620.234.00.1 CuSn4Zn2PS, d=40mm, d1=35mm 620.235.00.1 CuSn4Zn2PS, d=50mm, d1=42mm 620.236.00.1 CuSn4Zn2PS, d=63mm, d1=54mm 620.250.00.1 X5CrNiMo17-12-2, d=16mm, d1=15mm 620.251.00.1 X5CrNiMo17-12-2, d=20mm, d1=18mm 620.252.00.1 X5CrNiMo17-12-2, d=20mm, d1=22mm 620.253.00.1 X5CrNiMo17-12-2, d=25mm, d1=22mm 620.254.00.1 X5CrNiMo17-12-2, d=32mm, d1=28mm 620.255.00.1 X5CrNiMo17-12-2, d=40mm, d1=35mm 620.256.00.1 X5CrNiMo17-12-2, d=50mm, d1=42mm 620.257.00.1 X5CrNiMo17-12-2, d=63mm, d1=54mm FlowFit adapter to Geberit Mapress, with pressing socket 620.329.00.1 X5CrNiMo17-12-2, d=16mm, d1=12mm 620.332.00.1 X5CrNiMo17-12-2, d=16mm, d1=15mm 620.347.00.1 X5CrNiMo17-12-2, d=20mm, d1=15mm 620.333.00.1 X5CrNiMo17-12-2, d=20mm, d1=18mm 620.334.00.1 X5CrNiMo17-12-2, d=20mm, d1=22mm 620.335.00.1 X5CrNiMo17-12-2, d=25mm, d1=22mm 620.336.00.1 X5CrNiMo17-12-2, d=32mm, d1=28mm 620.337.00.1 X5CrNiMo17-12-2, d=40mm, d1=35mm 620.338.00.1 X5CrNiMo17-12-2, d=50mm, d1=42mm 620.339.00.1 X5CrNiMo17-12-2, d=63mm, d1=54mm FlowFit adapter with male thread 620.300.00.1 CuZn21Si3P, d=16mm, R=3/8" 620.301.00.1 CuZn21Si3P, d=20mm, R=3/8" 620.302.00.1 CuZn21Si3P, d=25mm, R=1/2" 620.303.00.1 CuZn21Si3P, d=32mm, R=1" 620.304.00.1 CuZn21Si3P, d=40mm, R=1" 620.305.00.1 CuZn21Si3P, d=50mm, R=1 1/2" 620.306.00.1 CuZn21Si3P, d=63mm, R=2" 620.307.00.1 CuZn21Si3P, d=75mm, R=2 1/2" 620.310.00.1 CuZn21Si3P, d=16mm, R=1/2" 620.311.00.1 CuZn21Si3P, d=20mm, R=1/2" 620.312.00.1 CuZn21Si3P, d=25mm, R=3/4" 620.313.00.1 CuZn21Si3P, d=32mm, R=1 1/4" 620.314.00.1 CuZn21Si3P, d=40mm, R=1 1/4" 620.315.00.1 CuZn21Si3P, d=50mm, R=2" 620.316.00.1 CuZn21Si3P, d=63mm, R=2 1/2" 620.320.00.1 CuZn21Si3P, d=16mm, R=3/4" 620.321.00.1 CuZn21Si3P, d=20mm, R=3/4" 620.322.00.1 CuZn21Si3P, d=25mm, R=1" 620.324.00.1 CuZn21Si3P, d=40mm, R=1 1/2" 619.700.00.1 X5CrNiMo17-12-2, d=20mm, R=1/2" 619.701.00.1 X5CrNiMo17-12-2, d=25mm, R=3/4" 619.702.00.1 X5CrNiMo17-12-2, d=32mm, R=1" 619.703.00.1 X5CrNiMo17-12-2, d=40mm, R=1 1/4" 619.704.00.1 X5CrNiMo17-12-2, d=50mm, R=1 1/2" 619.705.00.1 X5CrNiMo17-12-2, d=63mm, R=2" 619.706.00.1 X5CrNiMo17-12-4, d=75mm, R=2 1/2" FlowFit adapter with female thread: 620.400.00.1 CuZn21Si3P, d=16mm, Rp=3/8" 620.410.00.1 CuZn21Si3P, d=16mm, Rp=1/2" 620.420.00.1 CuZn21Si3P, d=16mm, Rp=3/4" 620.401.00.1 CuZn21Si3P, d=20mm, Rp=3/8" 620.411.00.1 CuZn21Si3P, d=20mm, Rp=1/2" 620.421.00.1 CuZn21Si3P, d=20mm, Rp=3/4" 620.402.00.1 CuZn21Si3P, d=25mm, Rp=3/4" 620.412.00.1 CuZn21Si3P, d=25mm, Rp=1" 620.403.00.1 CuZn21Si3P, d=32mm, Rp=1" 620.413.00.1 CuZn21Si3P, d=32mm, Rp=1 1/4" 620.404.00.1 CuZn21Si3P, d=40mm, Rp=1" 620.414.00.1 CuZn21Si3P, d=40mm, Rp=1 1/4" 620.424.00.1 CuZn21Si3P, d=40mm, Rp=1 1/2" 620.405.00.1 CuZn21Si3P, d=50mm, Rp=1 1/2" 620.415.00.1 CuZn21Si3P, d=50mm, Rp=2" 620.406.00.1 CuZn21Si3P, d=63mm, Rp=2" 620.416.00.1 CuZn21Si3P, d=63mm, Rp=2 1/2" 620.407.00.1 CuZn21Si3P, d=75mm, Rp=2 1/2" FlowFit bend adapter 90° with male thread 620.510.00.1 CuSn4Zn2PS, d=16mm, R=1/2" 620.520.00.1 CuSn4Zn2PS, d=16mm, R=3/4" 620.511.00.1 CuSn4Zn2PS, d=20mm, R=1/2" 620.521.00.1 CuSn4Zn2PS, d=20mm, R=3/4" 620.502.00.1 CuSn4Zn2PS, d=25mm, R=3/4" 620.512.00.1 CuSn4Zn2PS, d=25mm, R=1" 620.503.00.1 CuSn4Zn2PS, d=32mm, R=1" 620.504.00.1 CuSn4Zn2PS, d=40mm, R=1 1/4" 620.505.00.1 CuSn4Zn2PS, d=50mm, R=1 1/2" 620.506.00.1 CuSn4Zn2PS, d=63mm, R=2" FlowFit 90° bend adapter with male thread, long: 620.522.00.1 CuSn4Zn2PS, d=16mm, R=1/2" 620.523.00.1 CuSn4Zn2PS, d=16mm, R=3/4" 620.524.00.1 CuSn4Zn2PS, d=20mm, R=1/2" 620.525.00.1 CuSn4Zn2PS, d=20mm, R=3/4" 620.526.00.1 CuSn4Zn2PS, d=25mm, R=3/4" 620.527.00.1 CuSn4Zn2PS, d=25mm, R=1" 620.528.00.1 CuSn4Zn2PS, d=32mm, R=1" FlowFit bend adapter 90° with female thread 620.532.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4" 620.533.00.1 CuSn4Zn2PS, d=32mm, Rp=1" 620.534.00.1 CuSn4Zn2PS, d=40mm, Rp=1 1/4" 620.535.00.1 CuSn4Zn2PS, d=50mm, Rp=1 1/2" 620.536.00.1 CuSn4Zn2PS, d=63mm, Rp=2" 620.540.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.541.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" 620.542.00.1 CuSn4Zn2PS, d=25mm, Rp=1" 620.550.00.1 CuSn4Zn2PS, d=16mm, Rp=3/4" 620.551.00.1 CuSn4Zn2PS, d=20mm, Rp=3/4" FlowFit adapter with MasterFix 620.290.00.1 PPSU, d=16mm, RpMF=1/2" 620.291.00.1 PPSU, d=20mm, RpMF=1/2" FlowFit elbow adapter 90° with MasterFix: 620.490.00.1 PPSU, d=16mm, RpMF=1/2" 620.491.00.1 PPSU, d=20mm, RpMF=1/2" FlowFit T-piece adapter with MasterFix, through-flow 620.380.00.1 PPSU, d=16mm, RpMF=1/2", d1=16mm 620.381.00.1 PPSU, d=20mm, RpMF=1/2", d1=16mm 620.391.00.1 PPSU, d=20mm, RpMF=1/2", d1=20mm 620.382.00.1 PPSU, d=25mm, RpMF=1/2", d1=20mm 620.392.00.1 PPSU, d=25mm, RpMF=1/2", d1=25mm 620.780.00.1 PPSU, d=16mm, d1=16mm, RpMF1=1/2" 620.781.00.1 PPSU, d=20mm, d1=20mm, RpMF1=1/2" FlowFit adapter to Compact 620.560.00.1 CuZn21Si3P, d=16mm, di=21mm 620.561.00.1 CuZn21Si3P, d=20mm, di=21mm 620.562.00.1 CuZn21Si3P, d=25mm, di=21mm FlowFit screw connection 620.570.00.1 CuZn21Si3P, d=16mm 620.571.00.1 CuZn21Si3P, d=20mm 620.572.00.1 CuZn21Si3P, d=25mm 620.573.00.1 CuZn21Si3P, d=32mm 620.574.00.1 CuZn21Si3P, d=40mm 620.575.00.1 CuZn21Si3P, d=50mm 620.576.00.1 CuZn21Si3P, d=63mm FlowFit adapter union with clamping ring 620.680.00.1 CuZn21Si3P, d=16mm, d1=12mm 620.690.00.1 CuZn21Si3P, d=16mm, d1=15mm 620.681.00.1 CuZn21Si3P, d=20mm, d1=15mm FlowFit elbow adapter 90° with clamping ring union 620.700.00.1 CuSn4Zn2PS, d=16mm, d1=12mm 620.710.00.1 CuSn4Zn2PS, d=16mm, d1=15mm 620.701.00.1 CuSn4Zn2PS, d=20mm, d1=15mm 620.720.00.1 CuZn21Si3P / Cu, d=16mm, d1=15mm 620.721.00.1 CuZn21Si3P / Cu, d=20mm, d1=15mm 620.722.00.1 CuZn21Si3P / Cu, d=25mm, d1=22mm FlowFit adapter with screw connection to PEX pipes: 620.730.00.1 CuZn21Si3P, d=16mm, d1=16mm, PN=6bar 620.731.00.1 CuZn21Si3P, d=20mm, d1=20mm, PN=6bar 620.732.00.1 CuZn21Si3P, d=25mm, d1=25mm, PN=6bar FlowFit pipe end plug 620.740.00.1 CuZn21Si3P, d=16mm 620.741.00.1 CuZn21Si3P, d=20mm 620.742.00.1 CuZn21Si3P, d=25mm FlowFit tap connector box 90° with MasterFix 650.681.00.3 CC499K, d=16mm, Rp=1/2" 651.681.00.3 CC499K, d=20mm, Rp=1/2" 652.682.00.3 CC499K, d=20mm, Rp=3/4" Tap connector box 90° for MasterFix 650.687.00.3 CC499K, Rp=1/2" 650.688.00.3 CC499K, Rp=3/4" FlowFit double tap connector box 90° with MasterFix 650.683.00.3 CC499K, d=16mm, Rp=1/2", d1=16mm 652.685.00.3 CC499K, d=20mm, Rp=1/2", d1=16mm Double tap connector box 90° for MasterFix 650.689.00.3 CC499K, Rp=1/2" FlowFit tap connector box 90° with MasterFix, premounted 650.791.00.3 CC499K, d=16mm, Rp=1/2", AD=15.3cm 651.791.00.3 CC499K, d=20mm, Rp=1/2", AD=15.3cm 650.792.00.3 CC499K, Rp=1/2", RMF=1/2", AD=15.3cm FlowFit connection bend 90° 620.802.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4", L=5.2cm 620.750.00.1 CuSn4Zn2PS, d=16mm, Rp=3/8", L=3.6cm 620.751.00.1 CuSn4Zn2PS, d=20mm, Rp=3/8", L=3.6cm 620.760.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=3.6cm 620.761.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=3.6cm 620.810.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=5.2cm 620.811.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=5.2cm 620.821.00.1 CuSn4Zn2PS, d=20mm, Rp=3/4", L=5.2cm 620.770.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=7.8cm 620.771.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=7.8cm 620.800.00.1 CuSn4Zn2PS, d=16mm, Rp=3/8", L=5.2cm 620.801.00.1 CuSn4Zn2PS, d=20mm, Rp=3/8", L=5.2cm FlowFit T-elbow tap connector 90°, offset 620.951.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=3.6cm 620.981.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=5.2cm FlowFit double elbow tap connector 90°: 620.830.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=16mm, L=5.2cm 620.831.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=20mm, L=5.2cm 620.832.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=25mm, L=5.2cm 620.841.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=16mm, L=5.2cm 620.842.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=20mm, L=5.2cm 620.851.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=5.2cm 620.852.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=25mm, L=5.2cm FlowFit corner elbow connector 90° 620.881.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=3.6cm 620.921.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=5.2cm FlowFit set of connection bend 90°, double 619.620.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=4.7cm, AD=15cm 619.621.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15cm FlowFit connection bend 90°, premounted 619.630.00.1 single: CuSn4Zn2PS, d=16mm, Rp=1/2", L1=5.2cm 619.631.00.1 single: CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm FlowFit elbow tap connector 90°, premounted, double 619.640.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=5.2cm, AD=15.3cm 619.651.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm 619.641.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=10cm FlowFit PushFit tap connector box 90° pre-mounted, double 619.661.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm FlowFit elbow tap connector 90°, premounted, double 619.671.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=7.8cm, AD=15.3cm FlowFit connection bend 90°, premounted, double, with drain pipe bracket and connection bend 619.681.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm FlowFit elbow tap connector 90°, premounted, double 619.690.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=3.6cm, AD=15.3cm FlowFit elbow tap connector 90° for concealed cistern: 620.790.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.791.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" FlowFit Mepla elbow tap connector 90° for concealed cistern 620.890.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.891.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" FlowFit FloiwFit connector T-piece for concealed cistern 620.990.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.991.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" Manifold with threaded connection and connection nipple for manifold, for MasterFix 653.428.00.1 CC770S, Rp=3/4", RMF1=1/2", R1=3/4", 2 outlets 653.429.00.1 CC770S, Rp=3/4", RMF1=1/2", R1=3/4", 3 outlets Offset bend with male thread 653.478.00.1 CC499K, R=3/4" Cap with MasterFix 653.420.00.1 CW617N, RpMF=1/2" FlowFit connection nipple for manifold, for Euro cone 620.330.00.1 CuZn21Si3P, d=16mm, G=3/4" 620.331.00.1 CuZn21Si3P, d=20mm, G=3/4"

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Manufacturer:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Range of tank and cistern connectors, with push fittings. Models CM0715S and CM0722S are for use with copper tube (manufactured to BS EN 1057) PE-X pipe (BS7291-3) & PB pipe (BS7291-2). Until April 2023, model CM0728S was only for use with copper tube (manufactured to BS EN 1057). From May 2023, model CM0728S is also for use with PE-X pipe (BS7291-3) & PB pipe (BS7291-2). Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2212014

Size:

15mm, 22mm, 28mm - pushfit

Marking:

John Guest logo “JG” (brand of Reliance Worldwide Corporation (UK) Ltd.) and size on body.

Installation Requirements:

R001

Expiry date:

31/12/2027

Model:

CM0715S - 15mm Tank Connector. CM0722S - 22mm Tank Connector. CM0728S - 28mm Tank Connector.

Product Images

Approval Holder:

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Address

HORTON ROAD WEST DRAYTON

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Address

HORTON ROAD WEST DRAYTON

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of WC flapper valves with a silicone seal, ABS body and internal overflow. The device is operated via a plastic chain to be connected to a cistern handle. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2104042

Size:

2” BSP (M)

Marking:

WDI, ECO and B1017 on body.

Installation Requirements:

R001 R571

Expiry date:

30/04/2026

Model:

B1017-G. B1017-U.

Product Images

Approval Holder:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Manufacturer:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Dual flush, WC outlet valve with internal overflow, operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2104334

Size:

62.12mm ∅

Marking:

Geberit and Type 212 on body

Installation Requirements:

R001 R571

Expiry date:

30/04/2026

Model:

Geberit Type 212 Flush Valve Models added October 2021: Geberit Type 212 Flush Valve – for Omega Cisterns Geberit Type 212 Flush Valve – for Sigma and Delta Cisterns

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company