Water Regulations Approval Scheme Ltd

Miscellaneous Fittings

Section Code 1530 :

WRAS Approval Number: #2303801

Range of tee pieces with nickel plated brass bodies. Models 0912/15CVCC & 0912/CVCC incorporate a non-return valve (not suitable for backflow prevention) and stainless steel retaining clip. Compression connections to be used with copper pipe to BS EN 1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85˚C.

Section:: 1530 Miscellaneous Fittings
Size:: see model
Marking:: Altecnic logo, casting date YYWW moulded on body
Installation Requirements:: R001
Expiry date:: 31/03/2028
Model:: 0912/22CC 22mm comp x 22mm spigot x 22mm spigot tee (22mm compression x 22mm tails) 0912/22CVCC 22mm comp x 22mm spigot x 22mm spigot tee c/w non return valve (22mm compression x 22mm tails) 0912/15CVCC 15mm comp x 15mm spigot x 15mm spigot tee c/w non return valve (15mm compression x 15mm tails) 0912/15CC 15mm comp x 15mm spigot x 15mm spigot (15mm compression x 15mm tails)

Approval Holder:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company
Manufacturer:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

WRAS Approval Number: #2210043

EcoBETA dual-flush retrofit device with an ABS body for use with siphons.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 2210043
Note:: When installed on a WC syphon, additional testing will be required to verify the WC complies with the reduced flush volume requirements of the Regulators Specification.
Marking:: EcoBeta on valve body
Installation Requirements:: R001
Expiry date:: 31/10/2027
Model:: EcoBETA Siphon - Siphon retro kit

Approval Holder:: ecoBETA Ltd

Company Name
ecoBETA Ltd
Address
Staunvej 29 DK-9240 NIBE Denmark

View All Listings by this Company
Manufacturer:: ecoBETA Ltd

Company Name
ecoBETA Ltd
Address
Staunvej 29 DK-9240 NIBE Denmark

View All Listings by this Company

WRAS Approval Number: #2203048

Range of commissioning valves incorporating integral test ports & DZR brass bodies. Maximum working pressure 20.0 bar. Maximum operating temperature 50°C.

Section:: 1530 Miscellaneous Fittings
Size:: Please refer to model.
Marking:: Pegler logo, flow arrow, CR, size and PN on body.
Installation Requirements:: R001
Expiry date:: 31/03/2027
Model:: 1250LF - ½” x DN15 - Item Code 126090: ½” BSP (F) inlet/outlet. 1250MF - ½” x DN15 - Item Code 126049: ½” BSP (F) inlet/outlet. 1250SF - ½” x DN15 - Item Code 126091: ½” BSP (F) inlet/outlet. 1250SF - ¾” x DN20 - Item Code 126092: ¾” BSP (F) inlet/outlet. 1250SF - 1” x DN25 - Item Code 126093: 1” BSP (F) inlet/outlet. 1250SF - 1¼” x DN32 - Item Code 126094: 1¼” BSP (F) inlet/outlet. 1250SF - 1½” x DN40 - Item Code 126095: 1½” BSP (F) inlet/outlet. 1250SF - 2” x DN50 - Item Code 126096: 2” BSP (F) inlet/outlet. (LF = Low Flow, ULF = Ultra Low Flow, MF = Medium Flow & SF = Standard Flow).

Approval Holder:: Pegler Yorkshire Group Ltd.

Company Name
Pegler Yorkshire Group Ltd.
Address
St. Catherine's Ave Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
0844 243 440

View All Listings by this Company

WRAS Approval Number: #2212043

Range of acoustic leak sensors with stainless steel bodies. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 2212043
Note:: Claims made by the manufacturer regarding leak detection have not been verified by test.
Size:: Please refer to model.
Marking:: Aquarius logo on body, model on cable.
Installation Requirements:: R001
Expiry date:: 31/12/2027
Model:: AQS-S-X-3-HNA-1-SS: 1" NPT (M) AQS-S-X-3-HNA-2-SS: 1" BSPT (M) X denotes cable length: 3, 5 & 10 metres.

Product Images

Approval Holder:: Aquarius Spectrum Ltd

Company Name
Aquarius Spectrum Ltd
Address
Hamahshev PO Box 8814 Israel

View All Listings by this Company
Manufacturer:: Aquarius Spectrum Ltd

Company Name
Aquarius Spectrum Ltd
Address
Hamahshev PO Box 8814 Israel

View All Listings by this Company

WRAS Approval Number: #2212913

Range of differential (DPI) or relative (RPI) pressure sensors (with or without temperature transmitter) with stainless steel bodies and EPDM ‘O’-rings. The DPI2 model consists of a sensor and fitting for a capillary tube which is used for measuring the differential pressure between either sides of the sensor. Maximum working pressure 30.0 Bar. Maximum operating temperature 100°C.

Section:: 1530 Miscellaneous Fittings
Size:: Sensor alone: ½” BSP (M). Sensor with adaptor: ¼" NPT (M), ½" NPT (M), ½" BSPP (M). Capillary tube (DPI2 models): ¼" BSPT (M).
Marking:: Grundfos name and logo, model, product no., version no., series no., technical information, and manufacturing country on adhesive label on body.
Installation Requirements:: R001
Expiry date:: 31/12/2027
Model:: DPI2 sensor alone: AAA/B.B-BBB B/C/D/E E.EE EE/FFF DPI2 with or without accessories: AAA/B.B-BBB B/C/D/E E.EE EE/FFF/GG/HHH/IIII Product: [A] - Must be DPI Range and unit: [B] - Of no importance to wetted parts* Gen.: [C] - Must be 2 Output: [D] Of no importance to wetted parts* (+T = temperature transmitter), Cable: [E] Of no importance to wetted parts* Sealing: [F] - The first character must be E, second and third character have no importance to wetted parts Materials: [G] - Must be either -- or -B, Connection: [H] - 02N or 03P or 02B or --, Packaging: [I] - Of no importance to wetted parts*. RPI sensor alone: AAA/B.B-BBB B/C/D/E E.EE EE/FFF RPI with or without accessories: AAA/B.B-BBB B/C/D/E E.EE EE/FFF/GG/HHH/IIII Product: [A] - Must be RPI Range and unit: [B] - Of no importance to wetted parts*, Gen.: [C] - Of no importance to wetted parts*, Output: [D] - Of no importance to wetted parts* (+T = temperature transmitter), Cable: [E] - Of no importance to wetted parts*, Sealing: [F] - The first character must be E, second and third character have no importance to wetted parts, Materials: [G] - Must be either -- or -S, Connection: [H] - 02N or 03P or 02B or --, Packaging: [I] - Of no importance to wetted parts*. Code for sealing [F]: “E” = EPDM ‘O’-rings. Code for materials [G]: "B" = brass fitting, "S" = stainless steel fitting, "--" = sensor only (w/o accessory). Code for connection [H]: "02N" = 1/4" NPT, "02B" = 1/4" BSPT, "03N" = 1/2" NPT, "03P" = 1/2" BSPP, "---" = sensor only (w/o accessory). * All characters are allowed.

Product Images

Approval Holder:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company
Manufacturer:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company