Water Regulations Approval Scheme Ltd

Fittings for use with Tube and Pipe

Section Code 1180 : Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

Back To Directory Sections

WRAS Approval Number: #250402063

Flomasta Range of Copper and Brass push fit fittings. Brass fittings are for use with PB pipe (manufactured to BS7291-2) & Copper pipe (manufactured to BS EN 1057) only. Copper fittings are for use with PB pipe (manufactured to BS7291-2), PE-X pipe (manufactured to BS7291-3) & Copper pipe (manufactured to BS EN 1057). Maximum working pressures and operating temperatures when used with: PB & PEX pipe – 3.0 bar and 92°C, 20.0 bar cold water. Copper pipe – 20.0 bar and 100°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250402063
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 10mm – 22mm.
Marking:: TLC Logo and size on body
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: Copper Model Code (Size): SCE6711M (10mm Pushfit) SCE6744M (Push-fit 22mm) SCE6766M (15mm Pushfit) SCE6766MC (15mm Pushfit) SCAE6766M (15mm Pushfit) SCASE6766M (15mm Pushfit) SCRD6716M (10mm x 15mm Pushfit Stem) SCRD6764M (15mm x 22mm Pushfit Stem) SCSE6766M (15mm Pushfit) SCU6711M (10mm Pushfit) SCU6744M (22mm Push-fit) SCU6766M (15mm Pushfit) SCU6766MC (15mm Pushfit) SCT67444M (22mm Push-fit) SCT67446M (22mm x 22mm x 15mm Push-fit) SCT67666M (15mm Pushfit) SCST676M (15mm Push-fit) SCST674M (22mm Push-fit) Brass Model Code (Size): SBDE6766M (15mm Pushfit) SBDMC6764M (15mm Pushfit x 1/2” BSPT (M)) SBDME6764M (15mm Pushfit x 1/2” BSPT (M)) SBDU6766M (15mm Pushfit) SBDT67666M (15mm Pushfit)

Approval Holder:: Kingfisher Plc.

Company Name
Kingfisher Plc.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX
Phone
+44 (0) 20 7372 8008

View All Listings by this Company
Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company

WRAS Approval Number: #250512018

Range of DZR brass push fit fittings for use with copper pipe (EN1057). Maximum working pressure 10.0 Bar. Maximum operating temperature 65 °C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250512018
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: “IDC” logo & size on body.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: 2PAA014 - Push-fit straight fitting 1/2”(14.7mm), 2PAA021 - Push-fit straight fitting 1/2”(14.7mm), 2PAB014 - Push-fit Elbow fitting 1/2”(14.7mm), 2PAB021 - Push-fit Elbow fitting 3/4”(21mm), 2PAC014 - Push-fit equal Tee fitting 1/2”(14.7mm), 2PAC021 - Push-fit equal Tee fitting 3/4”(21mm), 2PAD014 - Push-fit Stop End 1/2”(14.7mm), 2PAD021 - Push-fit Stop End 3/4”(21mm), 2PAE002 - Push-fit x Male straight adapter 1/2”(14.7mm) x 3/4”M, 2PAA121 - Push-fit Reduce straight adapter 3/4”(21mm) x 1/2”(14.7mm), 2PPA142 - Pushfit Straight Pushfit x Pipe 1/2”(14.7mm) x 3/4”(21mm), 2PAC221 - Push-fit Reduce Tee fitting 3/4”(21mm) x 3/4”(21mm) x 1/2”(14.7mm), 2PAC211 - Push-fit Reduce Tee fitting 3/4”(21mm) x 1/2”(14.7mm) x 1/2”(14.7mm), 2PAC212 - Push-fit Reduce Tee fitting 3/4”(21mm) x 1/2”(14.7mm) x 3/4”(21mm).

Product Images

Approval Holder:: IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company

WRAS Approval Number: #2106063

Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2106063
Size:: 15mm to 108mm
Marking:: RP - Rapid Press, WRAS Approved Product logo, Size & batch number.
Installation Requirements:: R001
Expiry date:: 30/06/2026
Model:: CCP015 - CCP108 15 - 108mm. FRCP Reducer x press: 22mmx15mm - FRCP022015 28mmx15mm - FRCP028015 28mmx22mm - FRCP022022 35mmx22mm - FRCP035022 35mmx28mm - FRCP035028 42mmx22mm - FRCP042022 42mmx28mm - FRCP042028 42mmx35mm - FRCP042035 54mmx35mm - FRCP054035 54mmx42mm - FRCP054042 67mmx54mm - FRCP067054 76mmx67mm - FRCP076067 108mmx76mm - FRCP108076 SECP015 - SECP108 Bend 90° x press: 15 - 108mm. ECP015 - EPC108 Bend 90° press x press: 15 - 108mm. ETCP015 - ETCP108 Equal Tee 3 x press: 15 - 108mm. 6040 & 6040CP Bend 45° x press: 12 - 108mm. OECP015 - OECP108 Bend 45° press x press: 15 - 108mm. RTCP015015022 -RTCP108108076 Reducing Tee 3 x press: 15mmx22mmx15mm 22mmx15mmx22mm 28mmx15mmx28mm 28mmx22mmx28mm 35mmx15mmx35mm 35mmx22mmx35mm 35mmx28mmx35mm 42mmx22mmx42mm 42mmx28mmx42mm 42mmx35mmx42mm 54mmx28mmx54mm 54mmx35mmx54mm 54mmx42mmx54mm 67mmx54mmx67mm 76mmx67mmx76mm 108mmx76mmx108mm 6085 & 6085CP Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 & 6086CP Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 & 6510CP Flange PN16: 76.1mm. Chrome plated models added 02/06/2023

Approval Holder:: Rapid Press Fittings Ltd

Company Name
Rapid Press Fittings Ltd
Address
2 Penrod Way Heysham Lancashire
Postcode
LA3 2UZ
Phone
(01524) 965100
General Email
jacobrelph@phd.ltd

View All Listings by this Company

WRAS Approval Number: #250602010

Twistloc’ range of push-fit fittings with PEX-b, polysulphone or PPE bodies, supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part 2) and copper pipe (EN1057). Maximum working pressure/temperature: 12.5 Bar @ 20°C. As of October 2025: Maximum working pressure/temperature 3 Bar @ 92°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250602010
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 10mm, 15mm, 22mm, 28mm
Marking:: TLC (TwistLoc logo) and size on body
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: ‘Twistloc’ range comprising of models: SRDE6764M 15mmX1/2"BSP DROP EAR ELBOW SRF6764M 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M 28mmX1"BSP FEMALE ADAPTOR SPU6711M 10mm STR UNION SPU6766M 15mm STR UNION SPU6744M 22mm STR UNION SPU6700M 28mm STR UNION SPU6761M 15mmX10mm REDUCING STR UNION SPU6746M 22mmX15mm REDUCING STR UNION SRSE6714M 10mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6764M 15mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6765M 15mmX3/4"BSP SWIVEL ELBOW (Hand Tighten) SRSE6714BM 10mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6764BM 15mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6765BM 15mmX3/4"BSP SWIVEL ELBOW (Brass Nut) SPSU6714M 10mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6764M 15mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6765M 15mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6745M 22mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6714BM 10mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6764BM 15mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6765BM 15mmX3/4"BSP SWIVEL UNION (Brass Nut) SPSU6745BM 22mmX3/4"BSP SWIVEL UNION (Brass Nut) SPST671M 10mm END STOP SPST676M 15mm END STOP SPST674M 22mm END STOP SRST670M 28mm END STOP SPE6711M 10mm ELBOW SPE6766M 15mm ELBOW SPE6744M 22mm ELBOW SPE6700M 28mm ELBOW SPE6761M 15mmX10mm REDUCING ELBOW SPE6746M 22mmX15mm REDUCING ELBOW SPATE6766M 15mm-135o STEM ELBOW SPATE6744M 22mm-135o STEM ELBOW SPR6716M 10mmX15mm REDUCER SPR6764M 15mmX22mm REDUCER SPR6760M 15mmX28mm REDUCER SPR6740M 22mmX28mm REDUCER SPT67111M 10mm TEE SPT67666M 15mm TEE SPT67444M 22mm TEE SPT67000M 28mm TEE SPT67611M 15mmX10mmX10mm REDUCING TEE SPT67661M 15mmX15mmX10mm REDUCING TEE SPT67664M 15mmX15mmX22mm REDUCING TEE SPT67466M 22mmX15mmX15mm REDUCING TEE SPT67464M 22mmx15mmx22mm REDUCING TEE SPT67441M 22mmx22mmx10mm REDUCING TEE SPT67446M 22mmX22mmX15mm REDUCING TEE SPT67044M 28mmX22mmX22mm REDUCING TEE SPT67040M 28mmX22mmX28mm REDUCING TEE SPT67001M 28mmX28mmX10mm REDUCING TEE SPT67006M 28mmX28mmX15mm REDUCING TEE SPT67004M 28mmX28mmX22mm REDUCING TEE SPTT67441M 22mX22mmX10mm TUBE TEE SPTT67446M 22mX22mmX15mm TUBE TEE SPTE6711M 10mm TUBE ELBOW SPTE6716M 10mmx15mm TUBE ELBOW SPTE6766M 15mm TUBE ELBOW SPTE6744M 22mm TUBE ELBOW SRMC6764M 15mmX1/2"BSPT MALE CONNECTOR SRME6764M 15mmX1/2"BSPT MALE ELBOW SRFWC6741M 22mmX10mm 4WAY MANIFOLD SRU6766SM 15mm SLIP UNION SRU6744SM 22mm SLIP UNION STS10M 10mm PIPE INSERT STS15M 15mm PIPE INSERT STS22M 22mm PIPE INSERT STS28M 28mm PIPE INSERT SRAV63M 15mm AIR-VENT CONNECTOR

Product Images

Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company

WRAS Approval Number: #250615003

‘HDE-210xxx-xx’ range of brass press-fit fittings incorporating EPDM ‘O’-rings for use with copper pipes (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250615003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD. logo and size on body.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Plug: HDE-210001-01: 15mm, HDE-210001-02: 22mm, HDE-210001-03: 28mm, HDE-210001-05: 35mm, HDE-210001-06: 42mm, HDE-210001-07: 54mm. Straight Connector: HDE-210002-01: 15mm*15mm, HDE-210002-02: 22mm*22mm, HDE-210002-03: 28mm*28mm, HDE-210002-05: 35mm*35mm, HDE-210002-06: 42mm*42mm, HDE-210002-07: 54mm*54mm. Male Connector: HDE-210003-01 : 15mm*½”, HDE-210003-02 : 22mm*¾”, HDE-210003-03 : 28mm*1”, HDE-210003-05 : 35mm*1¼”, HDE-210003-06 : 42mm*1½”, HDE-210003-07 : 54mm*2”. Female Connector: HDE-210005-01 : 15mm*½”, HDE-210005-02 : 22mm*¾”, HDE-210005-03 : 28mm*1”, HDE-210005-05 : 35mm*1¼”, HDE-210005-06 : 42mm*1½”, HDE-210005-07 : 54mm*2”. Elbow Connector: HDE-210006-01: 15mm*15mm, HDE-210006-02: 22mm*22mm, HDE-210006-03: 28mm*28mm, HDE-210006-05: 35mm*35mm, HDE-210006-06: 42mm*42mm, HDE-210006-07: 54mm*54mm. Male Elbow Connector: HDE-210007-01: 15mm*½”, HDE-210007-02: 22mm*¾”, HDE-210007-03: 28mm*1”, HDE-210007-05: 35mm*1¼”, HDE-210007-06: 42mm*1½”, HDE-210007-07: 54mm*2”. Female Elbow Connector: HDE-210008-01: 15mm*½”, HDE-210008-02: 22mm*¾”, HDE-210008-03: 28mm*1”, HDE-210008-05: 35mm*1¼”, HDE-210008-06: 42mm*1½”, HDE-210008-07: 54mm*2”. Tee Connector: HDE-210009-01: 15mm*15mm*15mm, HDE-210009-02: 22mm*22mm*22mm, HDE-210009-03: 28mm*28mm*28mm, HDE-210009-05: 35mm*35mm*35mm, HDE-210009-06: 42mm*42mm*42mm, HDE-210009-07: 54mm*54mm*54mm. Male Tee Connector: HDE-210010-01: 15mm*15mm*½”, HDE-210010-02: 22mm*22mm*¾”, HDE-210010-03: 28mm*28mm*1”, HDE-210010-05: 35mm*35mm*1¼”, HDE-210010-06: 42mm*42mm*1½”, HDE-210010-07: 54mm*54mm*2”. Female Tee Connector: HDE-210011-01 : 15mm*15mm*½”, HDE-210011-02 : 22mm*22mm*¾”, HDE-210011-03 : 28mm*28mm*1”, HDE-210011-05 : 35mm*35mm*1¼”, HDE-210011-06 : 42mm*42mm*1½”, HDE-210011-07 : 54mm*54mm*2”. Wall-Plate Elbow Connector: HDE-210012-01: 15mm*15mm, HDE-210012-02: 22mm*22mm, HDE-210012-03: 28mm*28mm, HDE-210012-05: 35mm*35mm, HDE-210012-06: 42mm*42mm, HDE-210012-07: 54mm*54mm. Wall-Plate Male Elbow Connector: HDE-210013-01: 15mm*½”, HDE-210013-02: 22mm*¾”, HDE-210013-03: 28mm*1”, HDE-210013-05: 35mm*1¼”, HDE-210013-06: 42mm*1½”, HDE-210013-07: 54mm*2”. Wall-Plate Female Elbow Connector: HDE-210015-01: 15mm*½”, HDE-210015-02: 22mm*¾”, HDE-210015-03: 28mm*1”, HDE-210015-05: 35mm*1¼”, HDE-210015-06: 42mm*1½”, HDE-210015-07: 54mm*2”. All threaded connection are BSP.

Product Images

Approval Holder:: TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name
TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.
Address
No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610
Country
China

View All Listings by this Company
Manufacturer:: TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name
TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.
Address
No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610
Country
China

View All Listings by this Company