'FC941'. Black coloured, injection moulded, carbon graphite bearing. For use with water up to 85°C.

Section:

5022 Carbon

Expiry date:

31/05/2027

Approval Holder:

Schunk Kohlenstofftechnik GmbH

Company Name

Schunk Kohlenstofftechnik GmbH

Address

Rodmeiher Strasse 59, 35452 Heuchelheim

Country

Germany

View All Listings by this Company

'Intercrete 4841 White'. Site applied, light grey coloured (once mixed), two-component cementitious coating. Mix Part A (white liquid) with Part B (powder) in a weight ratio of 1:4 then apply in accordance with manufacturer's instructions '4841/031/012' dated 'July 2021'. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5038 Coatings, Paints & Linings

Section Subtitle:

Site applied concrete coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2109561

Expiry date:

30/09/2026

Approval Holder:

International Paints Limited

Company Name

International Paints Limited

Address

Tomlinson Road, Leyland, Lancashire

Postcode

PR25 2DY

View All Listings by this Company

‘Intergard 269 & Interline 975’. Site applied, white coloured Epoxy coating system comprising of a base coat and a topcoat. ‘Intergard 269’ is a two-component base coat which comprises of Part A (red/brown coloured) and Part B (straw coloured). Mix Part A & Part B in a mass ratio of 7.46:1 and apply as per manufacturer’s TDS ref. ‘206’, dated 08/02/2021. Cure for 12 days@25°C. ‘Interline 975’ is a two-component topcoat which comprises of Part A (white coloured) and Part B (straw coloured). Mix Part A & Part B in a mass ratio of 3.12:1 and apply as per manufacturer’s TDS ref. ‘3577’, dated 31/07/2017. Cure for 14 days@25°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5046 Coatings, Paints & Linings

Section Subtitle:

Site applied cistern coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2201535

Expiry date:

31/01/2027

Approval Holder:

International Paint Ltd.

Company Name

International Paint Ltd.

Address

Stoneygate Lane, Felling, Tyne & Wear

Postcode

NE10 0JY

View All Listings by this Company

'Krystaline Add PLUS 2.5'. Grey coloured, site-applied waterproofing admixture. Admixture is to be added to cement mix in a dosing ratio of 2.5 kg per m3 of concrete. Cure for 5°C for 48 hours. For use with water up to 23°C. This material is only approved for the dosing and curing conditions that appear on the approval. If the dosing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5055 Concrete, Cement and Mortar

Section Subtitle:

Waterproofers.

WRAS Approval Number:

2204509

Expiry date:

30/04/2027

Approval Holder:

Krystaline Technology S.A.

Company Name

Krystaline Technology S.A.

Address

C/ Nicolás de Bussi 52, Parque Empresarial, 03203 Elche (Alicante)

Country

Spain

View All Listings by this Company

'BELPA CSA 45'. Beige coloured fibre gasket material manufactured by calendaring. For use with water up to 23°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Section:

5075 Fibre

Section Subtitle:

These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

WRAS Approval Number:

2203523

Expiry date:

31/03/2027

Approval Holder:

Montero FYE S.A.

Company Name

Montero FYE S.A.

Address

Retuerto 15, 48903 Baracaldo

Country

Spain

Phone

+34 94 418 0011

General Email

raul@monterofye.com

View All Listings by this Company