`Water block` range of self-closing valves with either a natural (white), blue or grey plastic body and a gear driven volume-controlled operation device. The product incorporates a stainless-steel strainer. The product is designed to stop the flow of water once a preset value (in litres) has been reached. User intervention is then required to reset it. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

2335 Valves

Section Subtitle:

Stop, plastic, self-closing.

WRAS Approval Number:

250202701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

R008 only applies to the natural (white) body version. The self-closing function once a pre-set value has been reached has not been assessed and is not considered to be covered by the scope of this approval.

Size:

¾” BSP (F) inlet and ¾” BSP (M) outlet.

Marking:

Eltek, Flow arrow, Water block and Minimum flow rate on body.

Installation Requirements:

R001 R008

Expiry date:

28/02/2030

Model:

100041XX. Where ‘xx’ denotes the setting notches regulation and packaging type to either a ‘0’ or ‘9’.

Approval Holder:

Eltek SpA

Company Name

Eltek SpA

Address

Strada Valenza 5/A Casale Monferrato

Postcode

15033

Country

Italy

Phone

+39 0142 335511

General Email

f.ruzzafante@eltekgroup.it

View All Listings by this Company

Range of double regulating valves incorporating bronze bodies, brass disc face (½” - ¾” models) or PTFE (1” - 2” models), PTFE plate and NBR ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

2201828

Size:

½” BSP (F) - 2” BSP (F)

Marking:

T & C, PN, flow arrow and size cast on body. Trouvay & Cauvin and WRAS on operating member.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

TCBZDRV25

Approval Holder:

TROUVAY & CAUVIN

Company Name

TROUVAY & CAUVIN

Address

P.O. Box 16954, Jebel Ali Free Zone

Country

United Arab Emirates

View All Listings by this Company

Range of bronze double regulating valves. Products incorporate a non-rising spindle headwork. Products also include two test ports. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

241108016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Sizes: ½” to 2” Rc or Rp (F), NPT (F) or BSPP (F)

Marking:

IVAL logo, size, PN and flow arrow on body.

Installation Requirements:

R001 R120

Expiry date:

30/11/2029

Model:

D40F

Approval Holder:

IVAL Hydronics UK Ltd

Company Name

IVAL Hydronics UK Ltd

Address

71-75 Shelton Street, Covent Garden London

Postcode

WC2H 9JQ

Country

United Kingdom

Phone

0044 0203 989 4475

General Email

info@ival-hydronics.co.uk

View All Listings by this Company

Range of commercial dish washing machines with flow controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 bar. Cold water use only.

Section:

2390 Washing Machines

Section Subtitle:

Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2303400

Size:

¾” BSP(F) captive nut

Marking:

Maidaid, Company address, Model No, Serial No. Brand, Date of manufacture DD/MM/YY & other technical info on adhesive label on panel

Installation Requirements:

R001 R574

Expiry date:

31/03/2028

Model:

UT61-E UT61H-E UT70-E UT132-E

Approval Holder:

Buttress Group Ltd T/A Maidaid Halcyon

Company Name

Buttress Group Ltd T/A Maidaid Halcyon

Address

The Engine Shed Top Station Road Brackley

Country

Northamptonshire

View All Listings by this Company

Electrolytic inline limescale reducer with a zinc plated brass body and a copper coil. Maximum working pressure 10 bar. Maximum operating temperature 80°C.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm Compression.

Marking:

Inline, TFC Group & address, WRAS and model on adhesive label.

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

30/11/2029

Model:

ILS2.

Product Images

Approval Holder:

TFC Group

Company Name

TFC Group

Address

Tower House, Vale Rise, Tonbridge

Postcode

TN9 1TB

Country

Kent

View All Listings by this Company