Directory Search Results

Print List

#240704704

Range of wall mounted gas fired condensing instantaneous water heaters. Maximum working pressure 10.0bar. Maximum operating temperature 85°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
240704704
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP(M) for 10-12L & 14~17L/min (Flow rate) ¾” BSP(M) for 22~26L/min (Flow rate)
Marking:
Company Logo Vanward, model, pressure, tempeture and and other technical info on adhesive label on side panel.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
10~12L balance type & forces exhaust type gas water heater: JSG=balance type gas water heater, JSQ=forces exhaust type gas water, a= nominal heat input(kW) (fixed from 20, 22 to 24), b=volume (fixed from 10, 11 to 12), STc=Sd= the type of casing (c fixed from 27, 28 to 29, d fixed from 21, 25, 22, 21B, 23, 24, 25(A), 25(B), 26, 27, 28, 31, 32, 34 to 35) Casing 1: ST27, S21, Casing 2: ST28, S25, Casing 3: ST29, S22, Casing 4: S21B, Casing 5: S23, Casing 6: S24, Casing 7: S25(A), Casing 8: S25(B), Casing 9: S26, Casing 10: S27, Casing 11: S28, Casing 12: S31, Casing 13: S32, Casing 14: S34, Casing 15: S35. Where a typical code is: ①JSG28-14ST28、JSG14ST-S25: JSG=balance type gas water heater 28=nominal heat input(kW) 14=volume ST28=the type of casing, ST=structure platform S25=the type of casing 14~17L balance type & forces exhaust type gas water heater: JSG=balance type gas water heater, JSQ=forces exhaust type gas water, a= nominal heat input(kW) (fixed from 20, 22 to 24), b=volume (fixed from 10, 11 to 12), STc=Sd= the type of casing (c fixed from 27, 28 to 29, d fixed from 21, 25, 22, 21B, 23, 24, 25(A), 25(B), 27, 28, 31, 32, 34 to 35). Same casings as above but without casing 9. ②JSG14ST-S25(B) 、JSQ28-14ST28 JSG=balance type gas water heater JSQ=forces exhaust type gas water 14=volume 28=nominal heat input(kW) ST=structure platform S25(B)=the type of casing, ST28=the type of casing 22~26L outdoor type gas water heater: JSW=outdoor type gas water heater, a= nominal heat input(kW) (fixed from 44 to 52), b=volume (fixed from 22 to 26), ST58=Wd= the type of casing (d fixed from 81, 82, 83 to 84), Casing 1: ST58, W81, Casing 2: W82, Casing 3: W83, Casing 4: W84. ③JSW44-22ST58、 JSW22HT-W81: JSW=outdoor type gas water heater 44=nominal heat input(kW) 22=volume ST58=the type of casing, HT=structure platform W81=the type of casing
JSG20-10ST27, JSG10ST-S21, JSQ20-10ST27, JSQ10ST-S21, JSG22-11ST27, JSG11ST-S21, JSQ22-11ST27, JSQ11ST-S21, JSG24-12ST27, JSG12ST-S21, JSQ24-12ST27, JSQ12ST-S21, JSG20-10ST28, JSG10ST-S25, JSQ20-10ST28, JSQ10ST-S25, JSG22-11ST28, JSG11ST-S25, JSQ22-11ST28, JSQ11ST-S25, JSG24-12ST28, JSG12ST-S25, JSQ24-12ST28, JSQ12ST-S25, JSG20-10ST29, JSG10ST-S22, JSQ20-10ST29, JSQ10ST-S22, JSG22-11ST29, JSG11ST-S22, JSQ22-11ST29, JSQ11ST-S22, JSG24-12ST29, JSG12ST-S22, JSQ24-12ST29, JSQ12ST-S22, JSG10ST-S21B, JSQ10ST-S21B, JSG11ST-S21B, JSQ11ST-S21B, JSG12ST-S21B, JSQ12ST-S21B, JSG10ST-S23, JSQ10ST-S23, JSG11ST-S23, JSQ11ST-S23, JSG12ST-S23, JSQ12ST-S23, JSG10ST-S24, JSQ10ST-S24, JSG11ST-S24, JSQ11ST-S24, JSG12ST-S24, JSQ12ST-S24, JSG10ST-S25(A), JSQ10ST-S25(A), JSG11ST-S25(A), JSQ11ST-S25(A), JSG12ST-S25(A), JSQ12ST-S25(A), JSG10ST-S25(B), JSQ10ST-S25(B), JSG11ST-S25(B), JSQ11ST-S25(B), JSG12ST-S25(B), JSQ12ST-S25(B), JSG10ST-S26, JSQ10ST-S26, JSG12ST-S26, JSQ12ST-S26, JSG10ST-S27, JSQ10ST-S27, JSG12ST-S27, JSQ12ST-S27, JSG10ST-S28, JSQ10ST-S28, JSG12ST-S28, JSQ12ST-S28, JSG10ST-S31, JSQ10ST-S31, JSG12ST-S31, JSQ12ST-S31, JSG10ST-S32, JSQ10ST-S32, JSG12ST-S32, JSQ12ST-S32, JSG10ST-S34, JSQ10ST-S34, JSG12ST-S34, JSQ12ST-S34, JSG10ST-S35, JSQ10ST-S35, JSG11ST-S35, JSQ11ST-S35, JSG12ST-S35, JSQ12ST-S35. JSG28-14ST27, JSG14ST-S21, JSQ28-14ST27, JSQ14ST-S21, JSG30-16ST27, JSG16ST-S21, JSQ30-16ST27, JSQ16ST-S21, JSG31-17ST27, JSG17ST-S21, JSQ31-17ST27, JSQ17ST-S21, JSG28-14ST28, JSG14ST-S25, JSQ28-14ST28, JSQ14ST-S25, JSG30-16ST28, JSG16ST-S25, JSQ30-16ST28, JSQ16ST-S25, JSG31-17ST28, JSG17ST-S25, JSQ31-17ST28, JSQ17ST-S25, JSG28-14ST29, JSG14ST-S22, JSQ28-14ST29, JSQ14ST-S22, JSG30-16ST29, JSG16ST-S22, JSQ30-16ST29, JSQ16ST-S22, JSG31-17ST29, JSG17ST-S22, JSQ31-17ST29, JSQ17ST-S22, JSG14ST-S21B, JSQ14ST-S21B, JSG16ST-S21B, JSQ16ST-S21B, JSG17ST-S21B, JSQ17ST-S21B, JSG14ST-S23, JSQ14ST-S23, JSG16ST-S23, JSQ16ST-S23, JSG17ST-S23, JSQ17ST-S23, JSG14ST-S24, JSQ14ST-S24, JSG16ST-S24, JSQ16ST-S24, JSG17ST-S24, JSQ17ST-S24, JSG14ST-S25(A), JSQ14ST-S25(A), JSG16ST-S25(A), JSQ16ST-S25(A), JSG17ST-S25(A), JSQ17ST-S25(A), JSG14ST-S25(B), JSQ14ST-S25(B), JSG16ST-S25(B), JSQ16ST-S25(B), JSG17ST-S25(B), JSQ17ST-S25(B), JSG14ST-S27, JSQ14ST-S27, JSG16ST-S27, JSQ16ST-S27, JSG14ST-S28, JSQ14ST-S28, JSG16ST-S28, JSQ16ST-S28, JSG14ST-S31, JSQ14ST-S31, JSG16ST-S31, JSQ16ST-S31, JSG14ST-S32, JSQ14ST-S32, JSG16ST-S32, JSQ16ST-S32, JSG14ST-S34, JSQ14ST-S34, JSG16ST-S34, JSQ16ST-S34, JSG14ST-S35, JSQ14ST-S35,JSG16ST-S35, JSQ16ST-S35. JSW44-22ST58, JSW22HT-W81, JSW52-26ST58, JSW26HT-W81, JSW22HT-W82, JSW26HT-W82, JSW22HT-W83, JSW26HT-W83, JSW22HT-W84, JSW26HT-W84.
Product Images

Approval Holder:
Guangdong Vanward New Electric Co. Ltd.
Company Name
Guangdong Vanward New Electric Co. Ltd.
Address
13 Jianye Mid- Road Shunde High Tech Industry Development Zone
Country
Ronggui Shunde

View All Listings by this Company
Manufacturer:
Guangdong Vanward New Electric Co. Ltd.
Company Name
Guangdong Vanward New Electric Co. Ltd.
Address
13 Jianye Mid- Road Shunde High Tech Industry Development Zone
Country
Ronggui Shunde

View All Listings by this Company

Print This Approval


#240502069

Octave range of water meters with blue epoxy coated cast iron or plastic bodies (see models). Maximum working pressure 16.0 Bar. Maximum operating temperature 50.0°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
CZUS & Company logo on cap. Company Information,, product information and model range on label under the plastic lid.
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
CZUS 13905XXX DN: 40 mm (Composite Body, 2" BSP (M) 1CZUS 13915XXX COMPOSITE BODY DN: 50 mm 2.1/4" BSP (M) CZUS 139XXXXX IRON BODY DN: 50-300 mm (Iron Body, 2” to 12”) 13905 & 13915: Where the XXX denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications. 139XXXXX: Where the 1st X denotes the size, and can be replaced with any of the following: 1 = 2” Flanged, 2 = 2.1/2” Flanged, 3 = 3” Flanged, 4 = 4” Flanged, 5 = 6” Flanged, 6 = 8” Flanged, 7 = 10” Flanged, 8 = 12” Flanged, Where the 2nd X denotes body type and customer specific and can be replaced with any of the following: 5 = Composite body, All other numbers = Customer specific Where the 3rd, 4th and 5th X’s denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications.

Approval Holder:
Contadores De Agua De Zaragoza S.A. (Contazara S.A.)
Company Name
Contadores De Agua De Zaragoza S.A. (Contazara S.A.)
Address
Carretera Castellon KM. 5 5 50720 Zaragoza Spain

View All Listings by this Company

Print This Approval


#240702009

Range of inline and manifold water meters with brass bodies and stainless-steel strainers on the inlets. Maximum working pressure 16.0 Bar Maximum operating temperature 50.0°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Inline models. 1" BSP (M) Manifold models 1 ½” BSP (M)
Marking:
Itron logo, model code, serial number, date of manufacture (YYYY) on dial face.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
P50-I Aquadis+ DN20 inline P50-M Aquadis+ DN20 manifold
Product Images

Approval Holder:
Itron Metering Solutions UK Ltd
Company Name
Itron Metering Solutions UK Ltd
Address
Unit 10, Haven Exchange Felixstowe Suffolk
Postcode
IP11 2QX
Phone
+44 161 865 1181

View All Listings by this Company
Manufacturer:
ITRON France SAS
Company Name
ITRON France SAS
Address
9 rue Ampère Mâcon
Postcode
71031
Country
France
Phone
+33 6 43 94 48 08

View All Listings by this Company

Print This Approval


#240702034

Range of ultrasonic in-line water meters with brass bodies, inlets incorporating plastic strainers. Models MA408 – DN15 & DN25 incorporate a non-return valve (not suitable for backflow prevention) at the outlet. Maximum working pressure 16.0 Bar. Maximum operating temperature 50.0°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M).
Marking:
Kaifa logo, size, pressure and other technical information on faceplate. DN15 marking - Kaifa logo on top of water meter, Kaifa Logo, MM/YY date, serial number, meter parameter and model code.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
MA408 – DN15, DN20, DN25.
Product Images

Approval Holder:
Shenzhen Kaifa Technology (Chengdu) Co., Ltd.
Company Name
Shenzhen Kaifa Technology (Chengdu) Co., Ltd.
Address
No 99 Tianquan Hi Tech Development Zone Chengdu PRC
General Email
xingweiyang@kaifa.com

View All Listings by this Company
Manufacturer:
Shenzhen Kaifa Technology (Chengdu) Co., Ltd.
Company Name
Shenzhen Kaifa Technology (Chengdu) Co., Ltd.
Address
No 99 Tianquan Hi Tech Development Zone Chengdu PRC
General Email
xingweiyang@kaifa.com

View All Listings by this Company

Print This Approval


#240702042

Water meter with a brass body. Maximum working pressure 16 Bar. Maximum operating temperature 90°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M) inlet/outlet
Marking:
Diehl logo, Altair, Year of manufacture (YYYY) and product info on face. Flow arrow on body
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
ALTAIR V4 T90
Product Images

Approval Holder:
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Company Name
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Country

View All Listings by this Company
Manufacturer:
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Company Name
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Country

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1775 of 2243

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.