Range of wall or ceiling mounted shower outlets with chromium plated bodies (or black body for 22123KF0) consisting of showers arms and shower head for installation with specific rough-in sets. Shower head bodies incorporate approved single check valve cartridges, however, the complete assemblies have not been tested to demonstrate it provides backflow protection. The 26.484 model rough-in set incorporates a plastic flow regulator on the inlet. Maximum working pressure: Open Outlet. Maximum operating temperature: 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250602028

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Any flow rates claimed by the manufacturer have not been verified

Size:

½” BSP (F).

Marking:

Showerheads: Grohe on face. Concealed bodies: Grohe, Date of manufacture (YYMMDD), Made in Germany on adhesive label inside plastic shell, Grohe, DR and Flow arrows on brass body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

Grohe ‘RSH’ Cosmopolitan 310’ headshower sets 400mm: 26.475.xxx & 26.479.xxx. Grohe ‘RSH’ Smart Active 310’ headshower sets 400mm: 22123KF0 Concealed bodies (rough-in sets): 26.483 & 26.484 Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit BE0 – polished nickel DL0 – brushed warm sunset EN0 – brushed nickel GN0 – brushed cool sunrise GL0 – cool sunrise LS0 – moon white A00 – hard graphite

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

View All Listings by this Company

Range of shower handsets with plastic bodies and various finishes. Maximum operating temperature 60 °C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250612005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Keekoe on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

H01011, H01023, H02013, H03013, H03021, H04011, H04023, H05014, H05015, H06013, H09015, H11013, H12013, H17015, H20013, H21011, H27015, H28013, H29033, H30043, H31015, H33013, H34013, H34021, H35013, H36011, H34021, H34021, H43014, H46014, H39033, H37013, H39031, H39013, H39043, H49014, H48013, H48021, H46023, H55013, H56013, H41013 & H42013.

Approval Holder:

Xiamen Keekoe Sanitary Ware Co. Ltd.

Company Name

Xiamen Keekoe Sanitary Ware Co. Ltd.

Address

No.275-279 Huanzhu Road North Jimei Industrial Zone Xiamen

Country

China

View All Listings by this Company

Range of wall mounted bib tap with brass bodies (various finishes - see model), incorporating either non-rising spindle headworks with cross top operating members or quarter turn ceramic disc headworks with single lever operating members. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.

Section:

1750 Taps

Section Subtitle:

Draw off bib tap(s)

WRAS Approval Number:

250515012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Taizhou Shenglang Sanitary Ware Co., Ltd logo on rear of body.

Installation Requirements:

R001 R040

Expiry date:

31/05/2030

Model:

Non-rising spindle headworks: SL-T40810, SL-T40810B, SL-T40810BB, SL-T40810W, SL-T40810WB, SL-T40810WBB. Quarter turn ceramic disc headworks: SL-T40610, SL-T40610B, SL-T40610BB, SL-T42210, SL-T42210B, SL-T42210BB. Model suffix denotes finish: No suffix: Chrome plated. B suffix: Black. BB suffix: Brushed brass.

Product Images

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Section:

1800 Taps

Description:

A Range of Pillar tap(s).

Deck Mounted Capable of achieving AUK2 Tap Gap

Installation Requirements:

R001 R005

Expiry date:

31/07/2030

Notes & Further Information

1. Various finish: (1) With suffix B: Black (2) With suffix BB: Brushed brass (3) Models SL-T40217, SL-T40218, SL-T40107W, SL-T40108W & SL-T40106W, with suffix G: Champagne Gold

Product Images

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Shenglang Sanitary Ware Co, Ltd.

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Wall Mounted Concealed. Inlets incorporate approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

30/06/2030

Notes & Further Information

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies. Each inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression connections are for use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2310177

Size:

See model.

Marking:

Valtech logo, mix, CR and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

TMVIRCC 14.7mm IRISH- Size TMVIRCC 21mm IRISH- Size TMVCC 15mm TMVCC 22mm TMVMM 1/2” Male TMVMM 3/24 Male

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

1130 Baizhang Road Ningbo Zhejiang

Country

China

View All Listings by this Company

Range of wall mounted self-closing thermostatic shower valves with brass bodies, with a chrome plated dome type operating member. Models are also supplied with a chrome plated shower head with a plastic aerator. Both inlets incorporate stainless steel strainers and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250602015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models:

Marking:

790BOX - Delabie on case cover 790218 – Delabie on button and shower head 790219 – Delabie on button and shower head

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

790BOX – ½” BSP (M) X 3/4" BSP (F) 790218 – ¾” BSP (M) 790219 – ¾” BSP (M)

Manufacturer:

Delabie SAS

Company Name

Delabie SAS

Address

1-3 Henderson house Hithercroft Road Wallingford Oxfordshire

Postcode

OX10 9DG

Country

United Kingdom

View All Listings by this Company

Range of concealed thermostatic shower valves, (brass bodies – various finishes) incorporating a quarter turn ceramic disc headwork controlling the flow to the shower outlets. Model VQ15 and VQ16 incorporates a manual diverter to the outlets. Model VQ20 incorporates a single shower outlet and model VQ21 incorporates a double shower outlet. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate approved single check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250602040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) or ¾” BSP (F) inlets and outlets.

Marking:

Model number on body

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

VQ15 VQ16 VQ20 VQ21

Manufacturer:

Ultra Finishing Ltd.

Company Name

Ultra Finishing Ltd.

Address

Raikes Lane Ind Est. Lancashire, BL3 2NH

Phone

01282 436934

View All Listings by this Company

Range of normally closed (NC), solenoid valves with plastic bodies and EPDM diaphragm. Models with push-fit connections are for use with copper pipe (manufactured to EN 1057) and PTFE pipe. The products incorporate a plastic or stainless steel filter on the inlet, (except for models with swivel nut, push-fit and nozzle inlets, as well as the 44.007.126 and 01.021.126 models) . The 44.007.126 model incorporates a Y-pattern stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperatures: Cold water use only, 65°C or 90°C for models marked with ℗ - Please consult model section for further details.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

250404711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

AuK Muller, type (model), voltage, maximum water temperature (Tm 23°C, 65°C or 90°C as appropriate), date of manufacture WW/YY on adhesive label on coil. AuK Muller logo, flow arrow, pressure rating and model moulded on body. Models suitable for 90°C are also marked with a ℗ on the base of the body.

Installation Requirements:

R001 R008

Expiry date:

30/04/2030

Model:

Cold water use only models: 01.007.115: Inlet: G 3/8” (M), 01.021.126: Inlet: G 1” (M). 65°C models: 01.007.111: Inlet: G 1/2” (M); G 3/8”(M); G 3/4” (M), 01.007.115: Inlet: G 3/4” (M), 01.007.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Push-Fit; Ø 8 Push-Fit, 44.007.126: Inlet: G 1/2” (M); G 3/4” (M), 29.007.215: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M), 01.010.115: Inlet: G 3/4" (M), 01.010.125: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Nozzle; 3/8” Push-Fit; G 3/4” (F) ; 3/4-11,5 NH (F); G 1/2” (F), 01.010.215: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.216: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.315: Inlet: G 3/4” (M), 01.010.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.415: Inlet: G 3/4” (M), 01.010.425: Inlet: G 3/4” (M), 29.010.226: Inlet: G 3/4” (M), 29.010.326: Inlet: G 3/4” (M), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); 3/4-11,5 NH (M), 01.013.215: Inlet: G 3/4” (M), 01.013.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.017.126: Inlet: G 3/4” (M, 15.017.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 15.017.425: Inlet: G 3/4” (M); 3/4-11,5 NH (M). 90°C models (marked with a ℗): 01.010.115: Inlet: G 1/2” (M); G 3/4 (M), 01.010.125: Inlet: G 3/4” (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F); G 1/2” (F), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F), 01.017.115: Inlet: G 3/4” (M), 01.017.126: Inlet: G 3/4” (M); 3/4-11,5 NH (M).

Product Images

Approval Holder:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Country

Germany

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Manufacturer:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Country

Germany

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Range of spherical valves with DZR brass bodies (chromium plated), chromium plated brass balls, PTFE seat and single lever operating members. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250608014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Conex, size and PN on the body and Conex on lever.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

126013RRR250404 ½” BSP (F), 126013RRR250606 ¾” BSP (F), 126013RRR250808 1” BSP (F), 126013RRR251010 1 1/4” BSP (F), 126013RRR251212 1 ½” BSP (F), 126013RRR251616 2” BSP (F).

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of stop valves with either DZR brass or brass bodies (see models) with T-type operating members. The 15mm, 22mm and 28mm compression sizes are for use with copper pipe (manufactured to EN 1057). The 20mm and 25mm compression sizes are for use PE pipes (manufactured to EN 12201-2). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

250515009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

ZHEJIANG VALOGIN TECHNOLOGY CO., LTD. logo (‘V&G’), WRAS, size, flow arrow and production date (MM-YY) on body. 8511 suffix models are also marked with CR.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Compression models (DZR brass body): 16.20105.015.CP5R-8511: 15mm, 16.20105.022.CP5R-8511: 22mm, 16.20105.028.CP5R-8511: 28mm, 16.20105.820.CP5R-8511: 20mm, 16.20105.840.CP5R-8511: 25mm, 16.20105.811.CP5R-8511: 20mm x 15mm, 16.20105.812.CP5R-8511: 25mm x 15mm, 16.20105.821.CP5R-8511: 25mm x 20mm, 16.20105.831.CP5R-8511: 25mm x 22mm. Compression models (brass body): 16.20105.015.CP5R-8510: 15mm, 16.20105.022.CP5R-8510: 22mm, 16.20105.028.CP5R-8510: 28mm, 16.20105.820.CP5R-8510: 20mm, 16.20105.840.CP5R-8510: 25mm, 16.20105.811.CP5R-8510: 20mm x 15mm, 16.20105.812.CP5R-8510: 25mm x 15mm, 16.20105.821.CP5R-8510: 25mm x 20mm, 16.20105.831.CP5R-8510: 25mm x 22mm. Threaded models (brass body): 16.11005.G15.CP5R-8510: ½” BSP (F) x ½” BSP (F), 16.11005.G20.CP5R-8510: ¾” BSP (F) x ¾” BSP (F), 16.11005.G25.CP5R-8510: 1” BSP (F) x 1” BSP (F).

Product Images

Approval Holder:

Zhejiang Valogin Technology Co., Ltd.

Company Name

Zhejiang Valogin Technology Co., Ltd.

Address

Qinggang Technological Industrial Zone Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Valogin Technology Co., Ltd.

Company Name

Zhejiang Valogin Technology Co., Ltd.

Address

Qinggang Technological Industrial Zone Yuhuan, Zhejiang

Country

China

View All Listings by this Company

'FH821Z2'. Dark grey coloured, pressed & carbonised, resin impregnated carbon bearing. For use with water up to 85°C.

Section:

5022 Carbon

Expiry date:

30/06/2030

Approval Holder:

Schunk Kohlenstofftechnik GmbH

Company Name

Schunk Kohlenstofftechnik GmbH

Address

Rodmeiher Strasse 59, 35452 Heuchelheim

Country

Germany

View All Listings by this Company

'Resicoat PI Brown'. Factory applied, brown coloured epoxy coating. Apply as per manufacturers datasheet dated March 4, 2020. Post-cure for 20 minutes@210°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250555054

Expiry date:

31/05/2030

Approval Holder:

Akzo Nobel Powder Coatings GmbH

Company Name

Akzo Nobel Powder Coatings GmbH

Address

Markwiesenstrasse 50, D72770 Reutlingen

Country

Germany

Phone

+49 7121 519 191

General Email

info@resicoat.com

View All Listings by this Company

'CB Silicone Lubricant Spray (code: F15215)'. Clear, Silicone Lubricant Spray. Apply as per manufacturer's packaging instructions. For use with water up to 85°C.

Section:

5160 Lubricants

Expiry date:

31/05/2030

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

'ISO Resin Topaz-2100-AT'. Beige coloured polyester resin manufactured by hand layup. For use with water up to 45°C.

Section:

5217 Polyester

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250455054

Expiry date:

30/04/2030

Approval Holder:

Industrial Chemicals & Resins Co.

Company Name

Industrial Chemicals & Resins Co.

Address

P.O. Box 7952, 2nd Industrial City, 20th Street, Dammam – 31472

View All Listings by this Company

'Bondrite S1010'. Epoxy putty which has a grey coloured outer layer, a black coloured inner layer and is grey coloured once mixed. Mix layers by hand until a homogenous colour is achieved and then apply as per TDS, issue date November 2021. Cure for 24 hours@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5308 Repair Material

Expiry date:

31/03/2028

Approval Holder:

Bondrite Adhesives Ltd.

Company Name

Bondrite Adhesives Ltd.

Address

Unit 3H Sileby Road Industrial Estate, Barrow Upon Soar, Leicester

Postcode

LE12 8LP

View All Listings by this Company

‘ELASTOSIL® R’ solid silicone rubber materials. The number in brackets indicates shore hardness. Tested in-radius size 1.0mm. The following grades are natural and are for use with water up to 85°C. E indicates ELASTOSIL® AUX Crosslinker E. C1 indicates ELASTOSIL® AUX Crosslinker C1. Grades for extrusion and press moulding: R 401/20 E (shore hardness 20), R 401/30 E (30), R 401/40 E (40), R 401/50 E (50), R 401/55 E (55), R 401/60 E (60), R 401/70 E (70), R 401/80 E (80) & R 401/90 E (90). R 402/60 E (shore hardness 60), R 401/65 E (65) & R 401/75 E (75). R 420/30 E (shore hardness 30), R 420/40 E (40), R 420/50 E (50), R 420/60 E (60) & R 420/70 E (70). Grades for press moulding: R 401/20 C1 (shore hardness 20), R 401/30 C1 (30), R 401/40 C1 (40), R 401/50 C1 (50), R 401/55 C1 (55), R 401/60 C1 (60), R 401/70 C1 (70), R 401/80 C1 (80) & R 401/90 C1 (90). R 402/60 C1 (shore hardness 60) & R 402/75 C1 (75). R 420/30 C1 (shore hardness 30), R 420/40 C1 (40), R 420/50 C1 (50), R 420/60 C1 (60) & R 420/70 C1 (70). R 420/30 C1 & R 420/70 C1. The products may be coloured using the following ELASTOSIL® pigment pastes, also for use with water up to 85°C: PT Yellow RAL 1021. PT Yellow RAL 1016. PT Red RAL 3000 F. PT Red brown RAL 3013. PT Light brown RAL 8003. PT Dark brown RAL 8015. PT Green RAL 6017. PT Ultramarineblue RAL 5002. PT Light blue RAL 5015. PT Grey RAL 7040. PT Deep black RAL 9005. PT Black RAL 9017. PT White RAL 9010.

Section:

5415 Rubbers

Section Subtitle:

Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250655025

Expiry date:

30/06/2030

Approval Holder:

Wacker Chemie AG

Company Name

Wacker Chemie AG

Address

Johannes-Heb-Strasse 24, D-84489, Burghausen

Country

Germany

Phone

Tel: +49 8677 835947 Fax: +49 8677 834142

View All Listings by this Company

Range of single hole, double outlet (fixed) combination tap assemblies (various finishes) with electronically controlled functions to allow the tap to dispense boiling water, chilled water or sparkling water from under counter units (not supplied). All models incorporate a separate vent outlet within the tap spout for the near-boiling water circuit. Near-boiling circuit has a maximum operating temperature 98°C. Hot-water circuit has a maximum operating temperature of 65°C.

Section:

0683 Combination Tap Assemblies

Section Subtitle:

Multiple Function tap(s). In addition to normal tap function includes at least one of following functions chilled, filtered, carbonated, instantaneous hot water.

WRAS Approval Number:

250602049

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only. No flow control device, ‘control centre’ or under-counter units are included as part of this approval. R160 applies to the sparkling water connection only.

Size:

6.35mm LLDPE pipe/ silicone flexible pipe ID 7.7mm x OD 10.95mm

Marking:

Zip logo on tap body.

Installation Requirements:

R001 R006 R009 R010 R160

Expiry date:

30/06/2030

Model:

Chilled water only: 91521 HydroTap Classic Chilled Bright Chrome, 91589 HydroTap Classic Chilled Brushed Chrome, 91591 HydroTap Classic Chilled Matt Black, 91611 HydroTap Wave Chilled Bright Chrome, 91623 HydroTap Classic Plus Chilled Bright Chrome, 91623Z01 HydroTap Classic Plus Chilled Brushed Chrome, 91623Z03 HydroTap Classic Plus Chilled Matt Black. Boiling water only: 91517 HydroTap Classic Boiling Bright Chrome, 91583 HydroTap Classic Boiling Brushed Chrome, 91585 HydroTap Classic Boiling Matt Black, 91607 HydroTap Wave Boiling Bright Chrome, 91619 HydroTap Classic Plus Boiling Bright Chrome, 91619Z01 HydroTap Classic Plus Boiling Brushed Chrome, 91619Z03 HydroTap Classic Plus Boiling Matt Black. Boiling & ambient water: 91518 HydroTap Classic Boiling Ambient Bright Chrome, 91586 HydroTap Classic Boiling Ambient Brushed Chrome, 91588 HydroTap Classic Boiling Ambient Matt Black, 91608 HydroTap Wave Boiling Ambient Bright Chrome, 91620 HydroTap Classic Plus Boiling Ambient Bright Chrome, 91620Z01 HydroTap Classic Plus Boiling Ambient Brushed Chrome, 91620Z03 HydroTap Classic Plus Boiling Ambient Matt Black. Boiling & chilled water: 95272 HydroTap Classic Boiling Chilled Bright Chrome, 91569 HydroTap Classic Boiling Chilled Brushed Chrome, 91582 HydroTap Classic Boiling Chilled Matt Black, 91609Z00 HydroTap Wave Boiling Chilled Bright Chrome, 91609Z03 HydroTap Wave Boiling Chilled Matt Black, 91621Z00 HydroTap Classic Plus Boiling Chilled Bright Chrome, 91621Z01 HydroTap Classic Plus Boiling Chilled Brushed Chrome, 91621Z03 HydroTap Classic Plus Boiling Chilled Matt Black, 91621Z05 HydroTap Classic Plus Boiling Chilled Brushed Rose Gold, 91621Z07 HydroTap Classic Plus Boiling Chilled Brushed Gold, 91621Z11 HydroTap Classic Plus Boiling Chilled Brushed Nickel. Boiling, chilled & sparkling water: 91520 HydroTap Classic Boiling Chilled Sparkling Bright Chrome, 91566 HydroTap Classic Boiling Chilled Sparkling Brushed Chrome, 91581 HydroTap Classic Boiling Chilled Sparkling Matt Black, 91610 HydroTap Wave Boiling Chilled Sparkling Bright Chrome, 91610Z03 HydroTap Wave Boiling Chilled Sparkling Matt Black, 91622 HydroTap Classic Plus Boiling Chilled Sparkling Bright Chrome, 91622Z01 HydroTap Classic Plus Boiling Chilled Sparkling Brushed Chrome, 91622Z03 HydroTap Classic Plus Boiling Chilled Sparkling Matt Black, 91622Z07 HydroTap Classic Plus Boiling Chilled Sparkling Brushed Gold, 91622Z09 HydroTap Classic Plus Boiling Chilled Sparkling Gunmetal, 91622Z11 HydroTap Classic Plus Boiling Chilled Sparkling Brushed Nickel. Chilled & sparkling water: 91522 HydroTap Classic Chilled Sparkling Bright Chrome, 91592 HydroTap Classic Chilled Sparkling Brushed Chrome, 91594 HydroTap Classic Chilled Sparkling Matt Black, 91612 HydroTap Wave Chilled Sparkling Bright Chrome, 91624Z00 HydroTap Classic Plus Chilled Sparkling Bright Chrome, 91624Z01 HydroTap Classic Plus Chilled Sparkling Brushed Chrome, 91624Z03 HydroTap Classic Plus Chilled Sparkling Matt Black. Models added October 2025: Boiling & chilled water: 90887 HydroTap Boiling Chilled 2 Button Top Touch Industrial Tap, 90835 HydroTap 3 Button Industrial Side Touch Tap Boiling Chilled with safety button.

Product Images

Approval Holder:

Zip Heaters UK Ltd T/A Zip Water UK

Company Name

Zip Heaters UK Ltd T/A Zip Water UK

Address

Trafalgar House, Trafalgar Business Park, Dereham

Postcode

NR19 1JG

Country

United Kingdom

Phone

0345 600 5005

General Email

sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Manufacturer:

Zip Industries (Aust) Pty Ltd.

Company Name

Zip Industries (Aust) Pty Ltd.

Address

67 Allingham Street Condell Park NSW 2200

Country

Australia

General Email

View All Listings by this Company

Side entry BS1212-4 (2016) compact type float operated valves for use with WC flushing cisterns. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

240704743

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

BSP1/2” (M) Plastic, BSP1/2” (M) Brass,

Marking:

Flomasta, BS1212-4 & datum line on body.

Installation Requirements:

R001 R550 R560

Expiry date:

31/07/2029

Model:

5059340065700，5059340124032

Approval Holder:

Kingfisher PLC

Company Name

Kingfisher PLC

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Bottom entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns with a plastic body and adjustable float and a plastic flow regulator at the inlet. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

2012121

Size:

½” BSP (M)

Marking:

Plumb Bliss, logo & company website on side of float & BS1212-4 on cap

Installation Requirements:

R001 R550 R560

Expiry date:

31/12/2025

Model:

10.1258

Approval Holder:

Bliss UK Group Ltd

Company Name

Bliss UK Group Ltd

Address

Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire

Postcode

MK43 8TS

Country

United Kingdom

Phone

01234 860230

General Email

accounts@blissukgroup.co.uk

View All Listings by this Company