Directory Search Results

Print List

#2112372

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112372
Size:
½” BSP (M)
Marking:
Duravit on adhesive label bon body Duravit on flush plate Duravit, date of manufacture YYYY & Model on adhesive label inside cistern 6L waterline on casing within cistern
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
Durasystem range WD1034000080 WD1029000080

Approval Holder:
Duravit UK Ltd.
Company Name
Duravit UK Ltd.
Address
Unit 7 Stratus Park Brudenell Drive Brinklow Milton Keynes
Postcode
MK10 0DE

View All Listings by this Company

Print This Approval


#240902044

Range of floor mounted single hole, single outlet (fixed), combination tap assembly (various plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to shower outlet with a dome type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0675 Combination Tap Assemblies
Section Subtitle:
Multi-hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
240902044
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.
Marking:
Lanbiao on operating member
Installation Requirements:
R001 R020
Expiry date:
30/09/2029
Model:
F9918-XX Where XX denotes the finish and can be replaced with any of the following: No Suffix = Chrome H = Black DYB = Matte White BZ = Perl White Painted HGTS = Red Bronze HTL = Yellow Bronze Brushed Q = Bronze QTSL = Bronze Brushed Bright WTS = Bronze Brushed Matte STS = Acid Copper Brushed SDMGJ = Water Plated Rose Gold N = Nickel Brushed Bright Light NP = Nickel Brushed TJ = Titanium Gold TJLS = Titanium Gold Brushed G = Gold GJS = Gold Brushed GJSY = Zirconium Gold Wire Drawing Matte PGJFY = Zirconium Gold Wire Drawing Matte Bright Light PLSJ = Brushed Gold LSJY = Brushed Gold Matte MGJ = Rose GHold MGJL = Rose Gold Brushed DMGJ = Light Rose Gold Brushed HTS = Red Bronze Brushed QHP = Grey LSQH = Grey Brushed LHMGJ = Brushed Yellow Rose Gold
Product Images

Approval Holder:
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Company Name
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Address
Xudou Villiage Qinggang Yuhuan Zhejiang
Postcode
317606
Country
China
Phone
18957382651
General Email
957989256@qq.com

View All Listings by this Company
Manufacturer:
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Company Name
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Address
Xudou Villiage Qinggang Yuhuan Zhejiang
Postcode
317606
Country
China
Phone
18957382651
General Email
957989256@qq.com

View All Listings by this Company

Print This Approval


#240704740

Range of non-verifiable double check valve assemblies, consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies with a drain port located between the cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
240704740
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see model
Marking:
Albion Logo etched on body. Size, flow arrow mould on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
ART 37 15mm compression, ART 37 22mm compression ART 37 28mm compression

Approval Holder:
Albion Valves (UK) Limited
Company Name
Albion Valves (UK) Limited
Address
9a Fallbank Industrial Estate Dodworth Barnsley
Postcode
S75 3LS
Country
United Kingdom
Phone
01226 729900
General Email
samjed@albionvalvesuk.com

View All Listings by this Company

Print This Approval


#241104703

Non-verifiable double check valve assemblies incorporating two spring loaded resilient trim in-line check valve cartridges, DZR brass bodies (brushed chrome) and a drain port located in between the cartridges. The assemblies incorporate spherical valve. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
241104703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression x 15mm compression. 15 compression x ½ “ BSP (M)
Marking:
Inta, flow arrow and CR on body
Installation Requirements:
R001
Expiry date:
30/11/2029
Model:
DCV0123.1: 15mm compression x 15mm compression. DCV0123X.1: 15mm compression x ½” BSP (M)
Product Images

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#250104709

Range of non-verifiable double check valve assemblies, incorporating two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. The products incorporate a drain port between the cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
250104709
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½”, ¾” & 1” BSP (F)
Marking:
VIR logo, CR, PN16 DN and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/01/2030
Model:
782DR Double Check Valve
Product Images

Approval Holder:
VIR Valvoindustria Ing. Rizzio S.p.A.
Company Name
VIR Valvoindustria Ing. Rizzio S.p.A.
Address
Via Circonvallazione n. 10, 13018 Valduggia (VC)
Country
Italy

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 159 of 189

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.