Directory Search Results

Print List

#240255025

'TT-001 Natural'. Natural (appears white, translucent), compression moulded silicone rubber material. Shore hardness 50. Tested in-radius size 0.5mm. For use with water up to 85°C.

Section:
5415 Rubbers
Section Subtitle:
Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240255025
Expiry date:
28/02/2029

Approval Holder:
Rizhao Tiantuo Sealing Technology Co., Ltd.
Company Name
Rizhao Tiantuo Sealing Technology Co., Ltd.
Address
Maqihe West Village, Zhonglou Town, Lanshan District, Rizhao, Shandong Province
Country
China

View All Listings by this Company

Print This Approval


#2305558

'Guarri 543'. Blue coloured pipe sealant. Apply as per manufacturer's instructions '543 Usage', version '0', issue date '22/06/2023'. Cure for 24 hours@23°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5510 Sealants - Screwed Joints
Section Subtitle:
General.
WRAS Approval Number:
2305558
Expiry date:
31/05/2028

Approval Holder:
ATLAS PLAST İNŞ. MALZ. İTH. İHR. SAN. VE TİC LTD. ŞTİ.
Company Name
ATLAS PLAST İNŞ. MALZ. İTH. İHR. SAN. VE TİC LTD. ŞTİ.
Address
Adnan Kahveci mah. Yavuz Sultan Selim Blv. Perla Vista B Blok D:53 , Beylikdüzü, Istanbul
Country
Turkey

View All Listings by this Company

Print This Approval


#2312551

‘Drei Bond 5204’. Yellow coloured anaerobic adhesive paste. For use with water up to 85°C. This product is to be applied and cured in strict accordance with the manufacturer's instructions.

Section:
5520 Sealants - Screwed Joints
Section Subtitle:
Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions
WRAS Approval Number:
2312551
Expiry date:
31/12/2028

Approval Holder:
Drei Bond GmbH
Company Name
Drei Bond GmbH

View All Listings by this Company

Print This Approval


#240255016

‘THERMOLAST DW’ range of natural (appears off-white), black, white & grey coloured, extruded TPE-S materials with an in-radius between 0.39mm & 0.41mm. DW7HTV-(1) (70 ShA). DW7HTU-(1) (75 ShA). DW8HTV-(1) (80 ShA). DW8HTU-(1) (85 ShA). DW9HTV-(1) (90 ShA). DW0HTV-(1) (40 ShD). (1) – indicates the colour of the material: - LCNT: means without pigment (natural colour). - 9017: means black coloured material. - 9003: means white coloured material. - 7---: 4 digit code means grey coloured material, mixture of white and black pigments. For use with water up to 65°C.

Section:
5586 Thermoplastic Elastomer
Section Subtitle:
Material only
WRAS Approval Number:
240255016
Expiry date:
28/02/2029

Approval Holder:
Kraiburg TPE GmbH & Co KG
Company Name
Kraiburg TPE GmbH & Co KG
Address
Friedrich-Schmidt-Str. 2, 84478 Waldkraiburg
Country
Germany

View All Listings by this Company

Print This Approval


#2312385

Bidet seat assembly which discharges via a sensor actuated solenoid valve and utilises a ‘Type AB’ air gap arrangement (verified by test, suitable for backflow prevention against Fluid Category 5). Maximum working pressure 7.5 bar. Cold water supply only.

Section:
0278 Bidets and associated fittings
WRAS Approval Number:
2312385
Size:
½” BS(M) or 3/8” nut.
Marking:
Beewill on adhesive label. Voltage, Power, Waterproof grad , model no, serial no on manufacturer label.
Installation Requirements:
R001 R008 R009 R574
Expiry date:
31/12/2028
Model:
BWE7201A BWE7201B BWE7201AF BWE7201BF BWE6003A BWE6003AF BWE6003B BWE6003BF

Approval Holder:
Xiamen Beewill Sanitary Co., Ltd.
Company Name
Xiamen Beewill Sanitary Co., Ltd.
Address
No. 1, Dongren Road, Jimei District, Xiamen, 361022
Country
China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1568 of 2222

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.