Fixed filling loop assembly comprising of a lever operated brass spherical valve, an angled non-verifiable double check valve/spherical valve assembly (suitable for backflow protection against fluid category 3), brass adaptors and a copper connecting elbow fitting. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1015 Filling Loop

Size:

½” BSP captive nut (F)

Marking:

IDC, PN, date of manufacture (MM-YY), flow arrow & CR on body of double check valve/spherical valve.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

1BTA001

Product Images

Approval Holder:

Ningbo IDC International Trading Co. Ltd.

Company Name

Ningbo IDC International Trading Co. Ltd.

Address

Floor 43, Building A, International Trade Center, Ningbo Chamber of Commerce, No. 558 of Taikangzhong Road, Yinzhou District, Ningbo

Country

China

View All Listings by this Company

Range of in-line carbon block water filters and housings with polypropylene bodies. Maximum working pressure 8.0 bar. Cold water use only.

Section:

1050 Filters and Housings

Size:

¼” pushfit or 3/8” pushfit inlet connection.

Marking:

Model & technical info on adhesive label on body

Installation Requirements:

R001 R008 R120 R150 R170

Expiry date:

28/02/2029

Model:

¼” pushfit inlet connection: AQF-FF11B MB-F11B AQF-FF11F AQF-FF13 AQF-FF27 MB-F27 AQU-WF02 3/8” pushfit inlet connection: MB-W01

Approval Holder:

Qingdao Ecopure filter Co., Ltd

Company Name

Qingdao Ecopure filter Co., Ltd

Address

No. 13, Yishengbai Rd. Environmental Protection Industry Zone, Jimo

Country

Qingdao,

View All Listings by this Company

Range of inline filter cartridges with plastic or chromium plated brass bodies. Models 02-803231, 02-803235 & 02-803236 incorporate a plastic flow regulator, stainless steel filter and and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection. Model 02-000242 is a replacement filter for 02-803236 Chrome In-line filter. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

1055 Filter Cartridges

WRAS Approval Number:

2312330

Note:

These products have not been tested or approved for claims of antimicrobial properties made by the approval holder. IRN R008 applies to model 02-000242 only.

Size:

½” BSP (M)

Marking:

T-Safe. Flow arrow and PN on body of plastic units.

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

31/12/2028

Proviso:

The models listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The products have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.

Model:

02-803231 Medical In-Line filter. 02-803235 Sterile Medical In-Line filter. 02-803236 Chrome In-line filter. 02-000242 Replacement filter for 02-803236 Chrome In-line filter.

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Range of M type press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404010

Size:

see models

Marking:

YS, size etched on body. (Note: For 66.7mm models it will be marked as 67mm, for 76.1mm models it will be marked as 76mm, for 88.9mm it will be marked as 89mm)

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

STRAIGHT COUPLING CxC: 6270.15 - 15mm 6270.22 - 22mm 6270.28 - 28mm 6270.35 - 35mm 6270.42 - 42mm 6270.54 - 54mm 6270.67 - 66.7mm 6270.76 - 76.1mm 6270.89 - 88.9mm 6270.108 - 108mm SLIP COUPLING C x C: 6270L.15 - 15mm 6270L.22 - 22mm 6270L.28 - 28mm 6270L.35 - 35mm 6270L.42 - 42mm 6270L.54 - 54mm 6270L.67 - 66.7mm 6270L.76 - 76.1mm 6270L.89 - 88.9mm 6270L.108 - 108mm REDUCING COUPLING C x C: 6240.2215 - 22mm x 15mm 6240.2815 - 28mm x 15mm 6240.2822 - 28mm x 22mm 6240.3515 - 35mm x 15mm 6240.3522 - 35mm x 22mm 6240.3528 - 35mm x 28mm 6240.4215 - 42mm x 15mm 6240.4222 - 42mm x 22mm 6240.4228 - 42mm x 28mm 6240.4235 - 42mm x 35mm 6240.5415 - 54mm x 15mm 6240.5422 - 54mm x 22mm 6240.5428 - 54mm x 28mm 6240.5435 - 54mm x 35mm 6240.5442 - 54mm x 42mm 6240.6728 - 66.7mm x 28mm 6240.6735 - 66.7mm x 35mm 6240.6742 - 66.7mm x 42mm 6240.6754 - 66.7mm x 54mm 6240.7635 - 76.1mm x 35mm 6240.7642 - 76.1mm x 42mm 6240.7654 - 76.1mm x 54mm 6240.7667 - 76.1mm x 66.7mm 6240.8942 - 88.9mm x 42mm 6240.8954 - 88.9mm x 54mm 6240.8967 - 88.9mm x 66.7mm 6240.8976 - 88.9mm x 76.1mm 6240.10842 - 108mm x 42mm 6240.10854 - 108mm x 54mm 6240.10867 - 108mm x 66.7mm 6240.10876 - 108mm x 76.1mm 6240.10889 - 108mm x 88.9mm FITTING REDUCER F x C: 6243.2215 - 22mm x 15mm 6243.2815 - 28mm x 15mm 6243.2822 - 28mm x 22mm 6243.3515 - 35mm x 15mm 6243.3522 - 35mm x 22mm 6243.3528 - 35mm x 28mm 6243.4215 - 42mm x 15mm 6243.4222 - 42mm x 22mm 6243.4228 - 42mm x 28mm 6243.4235 - 42mm x 35mm 6243.5415 - 54mm x 15mm 6243.5422 - 54mm x 22mm 6243.5428 - 54mm x 28mm 6243.5435 - 54mm x 35mm 6243.5442 - 54mm x 42mm 6243.6728 - 66.7mm x 28mm 6243.6735 - 66.7mm x 35mm 6243.6742 - 66.7mm x 42mm 6243.6754 - 66.7mm x 54mm 6243.7635 - 76.1mm x 35mm 6243.7642 - 76.1mm x 42mm 6243.7654 - 76.1mm x 54mm 6243.7667 - 76.1mm x 66.7mm 6243.8942 - 88.9mm x 42mm 6243.8954 - 88.9mm x 54mm 6243.8967 - 88.9mm x 66.7mm 6243.8976 - 88.9mm x 76.1mm 6243.10842 - 108mm x 42mm 6243.10854 - 108mm x 54mm 6243.10867 - 108mm x 66.7mm 6243.10876 - 108mm x 76.1mm 6243.10889 - 108mm x 88.9mm 90DEG ELBOW C x C: 6002.15 - 15mm 6002.22 - 22mm 6002.28 - 28mm 6002.35 - 35mm 6002.42 - 42mm 6002.54 - 54mm 6002.67 - 66.7mm 6002.76 - 76.1mm 6002.89 - 88.9mm 6002.108 - 108mm 90DEG STREET ELBOW F x C: 6001.15 15mm 6001.22 22mm 6001.28 28mm 6001.35 35mm 6001.42 42mm 6001.54 54mm 6001.67 66.7mm 6001.76 76.1mm 6001.89 88.9mm 6001.108 108mm 45DEG ELBOW C x C: 6041.15 - 15mm 6041.22 - 22mm 6041.28 - 28mm 6041.35 - 35mm 6041.42 - 42mm 6041.54 - 54mm 6041.67 - 66.7mm 6041.76 - 76.1mm 6041.89 - 88.9mm 6041.108 - 108mm 45DEG STREET ELBOW F x C: 6040.15 - 15mm 6040.22 - 22mm 6040.28 - 28mm 6040.35 - 35mm 6040.42 - 42mm 6040.54 - 54mm 6040.67 - 66.7mm 6040.76 - 76.1mm 6040.89 - 88.9mm 6040.108 - 108mm CAP C x C: 6301.15 - 15mm 6301.22 - 22mm 6301.28 - 28mm 6301.35 - 35mm 6301.42 - 42mm 6301.54 - 54mm 6301.67 - 66.7mm 6301.76 - 76.1mm 6301.89 - 88.9mm 6301.108 - 108mm EQUAL TEE C x C: 6130.15 - 15mm 6130.22 - 22mm 6130.28 - 28mm 6130.35 - 35mm 6130.42 - 42mm 6130.54 - 54mm 6130.67 - 66.7mm 6130.76 - 76.1mm 6130.89 - 88.9mm 6130.108 - 108mm PART CROSSOVER F x C: 6086.15 - 15mm 6086.22 - 22mm CROSSOVER C x C: 6085.15 - 15mm 6085.22 - 22mm REDUCER ELBOW 6090.2215 - 22mm x 15mm 6090.2815 - 28mm x 15mm 6090.2822 - 28mm x 22mm REDUCING TEE: 6130R.221515 - 22mm x 15mm x 15mm 6130R.222215 - 22mm x 22mm x 15mm 6130R.282222 - 28mm x 22mm x 22mm 6130R.282822 - 28mm x 28mm x 22mm 6130R.281522 - 28mm x 15mm x 22mm 6130R.282815 - 28mm x 28mm x 15mm 6130R.352222 - 35mm x 22mm x 22mm 6130R.353522 - 35mm x 35mm x 22mm 6130R.353528 - 35mm x 35mm x 28mm 6130R.423535 - 42mm x 35mm x 35mm 6130R.152215 - 15mm x 22mm x 15mm 6130R.222822 - 22mm x 28mm x 22mm 6130R.221522 - 22mm x 15mm x 22mm 6130R.281528 - 28mm x 15mm x 28mm 6130R.282228 - 28mm x 22mm x 28mm 6130R.351535 - 35mm x 15mm x 35mm 6130R.352235 - 35mm x 22mm x 35mm 6130R.352835 - 35mm x 28mm x 35mm 6130R.421542 - 42mm x 15mm x 42mm 6130R.422242 - 42mm x 22mm x 42mm 6130R.422842 - 42mm x 28mm x 42mm 6130R.423542 - 42mm x 35mm x 42mm 6130R.541554 - 54mm x 15mm x 54mm 6130R.542254 - 54mm x 22mm x 54mm 6130R.542854 - 54mm x 28mm x 54mm 6130R.543554 - 54mm x 35mm x 54mm 6130R.544254 - 54mm x 42mm x 54mm 6130R.672867 - 66.7mm x 28mm x 66.7mm 6130R.673567 - 66.7mm x 35mm x 66.7mm 6130R.674267 - 66.7mm x 42mm x 66.7mm 6130R.675467 - 66.7mm x 54mm x 66.7mm 6130R.762276 - 76.1mm x 22mm x 76.1mm 6130R.762876 - 76.1mm x 28mm x 76.1mm 6130R.763576 - 76.1mm x 35mm x 76.1mm 6130R.764276 - 76.1mm x 42mm x 76.1mm 6130R.765476 - 76.1mm x 54mm x 76.1mm 6130R.766776 - 76.1mm x 66.7mm x 76.1mm 6130R.894289 - 88.9mm x 42mm x 88.9mm 6130R.895489 - 88.9mm x 54mm x 88.9mm 6130R.896789 - 88.9mm x 66.7mm x 88.9mm 6130R.897689 - 88.9mm x 76.1mm x 88.9mm 6130R.10854108 - 108mm x 54mm x 108mm 6130R.10867108 - 108mm x 66.7mm x 108mm 6130R.10876108 - 108mm x 76.1mm x 108mm 6130R.10889108 - 108mm x 88.9mm x 108mm

Product Images

Approval Holder:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Manufacturer:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Range of press fittings and pipe. Fittings incorporate EPDM ‘O’-rings Maximum working pressure 10 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2304373

Size:

SEE MODEL

Marking:

Manufacturers logo, TH and size on fitting. Logo and product info on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

M-1-0101-TH 16mm M-1-0103-TH 20mm M-1-0109-TH 26mm M-1-0105-TH 32mm M-1-0106-TH 40mm M-1-0107-TH 50mm M-1-0202-TH 20 x 16mm M-1-0223-TH 26 x 16mm M-1-0225-TH 26 x 20mm M-1-0207-TH 32 x 20mm M-1-0227-TH 32 x 26mm M-1-0211-TH 40 x 20mm M-1-0228-TH 40 x 26mm M-1-0213-TH 40 x 32mm M-1-0229-TH 50 x 26mm M-1-0216-TH 50 x 32mm M-1-0217-TH 50 x 40mm M-1-0301-TH 1/2"M x 16mm M-1-0302-TH 3.4" M x 16mm M-1-0305-TH 1/2" M x 20mm M-1-0306-TH 3/4" M x 20mm M-1-0307-TH 1" M x 20mm M-1-0326-TH 1/2"M x 26mm M-1-0327-TH 3/4"M x 26mm M-1-0328-TH 1" M x 26mm M-1-0313-TH 1"M x 32mm M-1-0314-TH 1 1/4" x 32mm M-1-0317-TH 1 1/4" M x 40mm M-1-0320-TH 1 1/2" M x 50mm M-1-0321-TH 2" M x 50mm M-1-0401-TH 1/2" F x 16mm M-1-0402-TH 3/4" F x 16mm M-1-0408-TH 3/4" F x 20mm M-1-0409-TH 1" F x 20mm M-1-0422-TH 1/2" F x 26mm M-1-0423-TH 3/4" F x 26mm M-1-0424-TH 1" F x 26mm M-1-0415-TH 1" F x 32mm M-1-0408-TH 3/4" F x 20mm M-1-0422-TH 1 1/4" F x 40mm M-1-0419-TH 1 1/2" F x 50mm M-1-3101-TH 1/2" C x 16mm M-1-3104-TH 3/4" C x 20mm M-1-3102-TH 3/4" C x 16mm M-1-3110-TH 3/4" C x 26mm M-1-3111-TH 1" X x 26mm M-1-3113-TH 1" C x 32mm M-1-3301-TH 1/2" C x 16mm M-1-3304-TH 3/4" C x 20mm M-1-3302-TH 15mm C x 16mm M-1-3305-TH 22mm C x 20mm M-1-3401-TH 16mm x1/2" M-1-3402-TH 16mm x 15mm M-1-3403-TH 20mm x 3/4" M-1-3404-TH 20mm x 22mm M-1-3405-TH 26mm x 22mm M-1-3406-TH 26mm x 28mm M-1-3407-TH 26mm x 3/4" M-1-3408-TH 26mm x 1" M-1-3409-TH 32mm x 28mm M-1-0501-TH 16mm M-1-0503-TH 20mm M-1-0509-TH 26mm M-1-0505-TH 32mm M-1-0506-TH 40mm M-1-0507-TH 50mm M-1-3201-TH 16mm x 100mm M-1-3202-TH 16mm x 300mm M-1-0801-TH 1/2" M x 16mm M-1-0805-TH 1/2" M x 20mm M-1-0806-TH 3/4M x 20mm M-1-0813-TH 1" M x 20mm M-1-0816-TH 3/4" M x 26mm M-1-0817-TH 1"M x 26mm M-1-0812-TH 1"M x 32mm M-1-0814-TH 1 1/4" M x 32mm M-1-0901-TH 1/2" F x 16mm M-1-0901CP-TH 1/2" x 16mm CP M-1-0905-TH 1/2" F x 20mm M-1-0906-TH 3/4" F x 20mm M-1-0913-TH 1" F x 20mm M-1-0914-TH 1/2" F x 26mm M-1-0915-TH 3/4" F x 26mm M-1-0916-TH 1" F x 26mm M-1-0912-TH 1"F x 32mm M-1-0917-TH 1 1/4" x 32mm M-1-1101-TH 16mm M-1-1103-TH 20mm M-1-1109-TH 26mm M-1-1105-TH 32mm M-1-1106-TH 40mm M-1-1107-TH 50mm M-1-1202-TH 16 x 16 x 20 M-1-1210-TH 20 x 16 x 16 M-1-1219-TH 20 x 16 x 20 M-1-1207-TH 20 x 20 x 16 M-1-1253-TH 20 x 20 x 26 M-1-1260-TH 26 x 16 x 16 M-1-1246-TH 26 x 16 x 20 M-1-1241-TH 26 x 16 x 26 M-1-1248-TH 26 x 26 x 20 M-1-1243-TH 26 x 20 x 26 M-1-1261-TH 26 x 26 x 16 M-1-1249-TH 26 x 26 x 20 M-1-1259-TH 26 x 26 x 32 M-1-1240-TH 32 x 16 x 32 M-1-1242-TH 32 x 20 x 32 M-1-1262-TH 32 x 26 x 20 M-1-1258-TH 32 x 26 x 26mm M-1-1245-TH 32 x 26 x 32 M-1-1215-TH 32 x 32 x 16 M-1-1217-TH 32 x 32 x 20 M-1-1257-TH 32 x 32 x 26 M-1-1229-TH 40 x 40 x 20 M-1-1261-TH 40 x 40 x 26 M-1-1231-TH 40 x 40 x 32 M-1-1262-TH 50 x 50 x 26 M-1-1234-TH 50 x 50 x 32 M-1-1235-TH 50 x 50 x 40 M-1-1001-TH 1/2" F x 16mm M-1-1004-TH 1/2" F x 20mm M-1-3501 1/2" x 16mm M-1-3502 1/2" x 16mm CP M-1-3503 15mm x 16mm M-1-3504 15mm x 16mm CP M-1-3505 3/4" x 20mm M-1-3506 1" x 26mm M-1-3507 22mm x 20mm M-1-3508 28mm x 26mm M-1-3601-TH 1/2" x 16mm M-1-3602-TH 15mm x 16mm M-1-3603-TH 3/4" x 20mm M-1-3701-TH 16mm x 15mm M-1-3702-TH 20mm x 22mm M-1-3703-TH 26mm x 28mm M-1-3801-TH 16mm x 1/2" M-1-3802-TH 20mm x 3/4" M-1-3803-TH 26mm x 1" M-1-1301-TH 16 x 16 x 1/2"F M-1-1306-TH 20 x 20 x 3/4" F M-1-1331-TH 26 x 26 x 1" F M-1-1313-TH 32 x 32 x 1" F M-1-2601-TH 16mm M-1-2603-TH 20mm M-1-2606-TH 26mm M-1-2605-TH 32mm M-6-2901-TH 16mm

Approval Holder:

Zhejiang Mingshi Xingxin Hvac Technology Co., Ltd.

Company Name

Zhejiang Mingshi Xingxin Hvac Technology Co., Ltd.

Address

No.1-7 Fengye Road Diankou Town Zhuji City

Country

Zhejiang Province

Phone

0086-575-89006963

General Email

manager@ms-piping.com

View All Listings by this Company