Directory Search Results

Print List

#2312362

Range of concealed WC dual flushing cisterns with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10 Bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2312362
Size:
½” BSP (M).
Marking:
OLI on cistern. 6l line inside cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/12/2028
Model:
AI103 PLUS MEC AI103 PLUS PNEU

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#2306086

Three-hole, single outlet (fixed), combination tap assembly (brass body – various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to the shower outlet. The product is supplied with a stainless-steel braided EPDM lined flexible connection hose to connect the head work to the spout outlet. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0653 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.
WRAS Approval Number:
2306086
Note:
The product does not include shower hose or handset.
Size:
Stainless steel braided, EPDM lined flexible hose assemblies with ¾” BSP captive nut end connections.
Marking:
Scudo on tap body
Installation Requirements:
R001 R006 R020
Expiry date:
30/06/2028
Model:
TAP246L

Approval Holder:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works Keighley West Yorkshire
Postcode
BD21 4LA
Country
United Kingdom
Phone
01535 663024
General Email
adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Print This Approval


#240404707

In-line non-verifiable single check valve assembly consisting of a single check valve cartridge housed within a DZR brass body. Maximum working pressure 16.0 bar. Cold water use only.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
240404707
Size:
¾” BSP (F) x ¾” BSP (M)
Marking:
Aquacheck, CR, flow arrow and 750MFS on body.
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
Aquacheck 750MFS
Product Images

Approval Holder:
Aquacheck Engineering Ltd
Company Name
Aquacheck Engineering Ltd
Address
Royal Barn Road Castleton Rochdale
Postcode
OL11 3DT
Phone
01706 712 593
General Email
sales@aqua-check.co.uk

View All Listings by this Company
Manufacturer:
Aquacheck Engineering Ltd
Company Name
Aquacheck Engineering Ltd
Address
Royal Barn Road Castleton Rochdale
Postcode
OL11 3DT
Phone
01706 712 593
General Email
sales@aqua-check.co.uk

View All Listings by this Company

Print This Approval


#241204701

Verifiable double check valve assembly consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body with two test ports. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0032 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EC - Verifiable double check valve.
WRAS Approval Number:
241204701
Note:
Not for use with water injected with CO2 gas
Size:
¾” BSP (M) outer, ½” BSP (F) inner
Marking:
Caleffi, flow arrow, CR, DN15, NF ECI moulded on body
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
304841 CST

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#240402052

Single hole, single outlet (fixed) over the rim swivel nozzle bidet combination tap assembly (brass body - various finishes) with a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a lever operated pop-up waste (not verified by test). Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
240402052
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP Captive nut end connections.
Marking:
SHS logo on underside of operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/04/2029
Model:
V6K19-YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: M = Metal Levers, MB = Metal Levers Black. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, CTB = City Bronze.
Product Images

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1554 of 2250

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.