A Range of drain valves with bronze bodies incorporating brass bonnets, stems and baffles with EPDM seats and O’-rings. The products incorporate a rising spindle operating mechanism. Maximum working pressure 16.0bar. Maximum operating temperature 85°C.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

241108001

Size:

See models.

Marking:

Albion Logo, BS2879/2 Cast onto the body.

Installation Requirements:

R001 R511

Expiry date:

30/11/2029

Model:

Albion ART 310 Bronze Drain Cock MBSP – BS 2879/2 - ½” or ¾” iso 7/1 male taper thread rising spindle. Albion ART 311 Bronze Drain Cock MBSP Lockshield – BS 2879/2 - ½” or ¾” iso 7/1 male taper thread rising spindle.

Approval Holder:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company

Manufacturer:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company

Range of draining taps with DZR brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2304099

Size:

See Models

Marking:

Conex, CR and size on body.

Installation Requirements:

R001 R511

Expiry date:

30/04/2028

Model:

DZR Brass Models: S746 (15mm Spigot) S742 (1/2” BSP (M))

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Self-closing combination tap assembly (chromium plated brass) with a spring-loaded headwork controlling both temperature and flow with a dome type operating member. The spout outlet incorporates a plastic flow straightener. The flexible hose inlets incorporate a combined EPDM washer and stainless-steel strainer, as well as an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

240604001

Size:

Stainless steel or polyamide braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Inta on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/06/2029

Model:

NC230CP

Product Images

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Manufacturer:

Idral S.p.A.

Company Name

Idral S.p.A.

Address

Via Isei, 8/10 - I-28010 Gargallo (NO)

Country

Italy

Phone

+39 0322 912017

General Email

View All Listings by this Company

Stainless steel interlocked shower hose with PVC inner hose and EPDM O-rings, various finishes. Open outlet use only. Maximum operating temperature 65°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240204029

Size:

½” BSP (F)

Marking:

C.P. HART on body

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

CPHS1102（CP/MB/BRG/BGM/BB/BN/PB） anti-twist 1.5m CP：Chrome plating MB：Matt black BRG：Brushed rose gold BGM：Gun mental BB：Brushed brass BN：Brushed nickel PB：polished black

Approval Holder:

C.P.Hart

Company Name

C.P.Hart

Address

Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford

Postcode

DA2 6QA

Country

United Kingdom

General Email

roy.davis@cphart.co.uk

View All Listings by this Company

Manufacturer:

C.P.Hart

Company Name

C.P.Hart

Address

Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford

Postcode

DA2 6QA

Country

United Kingdom

General Email

roy.davis@cphart.co.uk

View All Listings by this Company

Range of nylon braided (DG50X model series) or stainless steel braided (DG10X model series), PEX lined flexible hose assemblies with a variety of end connections (see models for full breakdown), including EPDM washers and ‘O’-rings where applicable. Some models are supplied with screwdriver operated isolation valves (see model list). All compression and push-fit fittings are to be used with copper pipe (manufactured to EN 1057). Maximum working pressure: 16 bar. Maximum operating temperature: 85°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240402029

Size:

See models below. Note: Comp = compression, PF = push-fit

Marking:

Fanski, WRAS and year of manufacture (YYYY) on ferrule

Installation Requirements:

R001 R008

Expiry date:

30/04/2029

Model:

DG50X-WRAS-200-L - 15mm comp x M10 short, DN8 DG10X-WRAS-400-L - 15mm comp x M10 short, DN8 DG50X-WRAS-201-L - 15mm comp x M12 short, DN8 DG10X-WRAS-401-L - 15mm comp x M12 short, DN8 DG50X-WRAS-202-L - ⅜” BSP (F) x 10mm comp, DN10 DG10X-WRAS-402-L - ⅜” BSP (F) x 10mm comp, DN10 DG50X-WRAS-203-L - ½” BSP (F) elbow x 15mm comp, DN10 DG10X-WRAS-403-L - ½” BSP (F) elbow x 15mm comp, DN10 DG50X-WRAS-204-L - ½” BSP (F) x ½” BSP (F), DN10 DG10X-WRAS-404-L - ½” BSP (F) x ½” BSP (F), DN10 DG50X-WRAS-205-L - ½” BSP (F) x 15mm comp iso valve, DN10 DG10X-WRAS-405-L - ½” BSP (F) x 15mm comp iso valve, DN10 DG50X-WRAS-206-L - 15mm PF x 15mm PF iso valve, DN10 DG10X-WRAS-406-L - 15mm PF x 15mm PF iso valve, DN10 DG50X-WRAS-207-L - ¾” BSP (F) x 22mm comp iso valve, DN13 DG10X-WRAS-407-L - ¾” BSP (F) x 22mm comp iso valve, DN13 DG50X-WRAS-208-L - ¾” BSP (F) x 22mm comp, DN13 DG10X-WRAS-408-L - ¾” BSP (F) x 22mm comp, DN13 DG50X-WRAS-209-L - 22mm PF x 22mm PF iso valve, DN13 DG10X-WRAS-409-L - 22mm PF x 22mm PF iso valve, DN13 DG50X-WRAS-210-L - ⅜” BSP (F) x 15mm comp, DN10 DG10X-WRAS-410-L - ⅜” BSP (F) x 15mm comp, DN10 DG50X-WRAS-211-L - ½” BSP (F) x 15mm comp, DN10 DG10X-WRAS-411-L - ½” BSP (F) x 15mm comp, DN10 DG50X-WRAS-212-L - 10mm comp x 15mm comp, DN10 DG10X-WRAS-412-L - 10mm comp x 15mm comp, DN10 DG50X-WRAS-213-L - 15mm comp x 15mm comp, DN10 DG10X-WRAS-413-L - 15mm comp x 15mm comp, DN10 DG50X-WRAS-214-L - ¾” BSP (F) x 15mm comp, DN10 DG10X-WRAS-414-L - ¾” BSP (F) x 15mm comp, DN10 DG50X-WRAS-215-L - 15mm comp x 22mm comp, DN10 DG10X-WRAS-415-L - 15mm comp x 22mm comp, DN10 DG50X-WRAS-216-L - ½” BSP (F) x 22mm comp, DN10 DG10X-WRAS-416-L - ½” BSP (F) x 22mm comp, DN10 DG50X-WRAS-217-L - ¾” BSP (F) x 15mm comp iso valve, DN10 DG10X-WRAS-417-L - ¾” BSP (F) x 15mm comp iso valve, DN10 DG50X-WRAS-218-L - 15mm PF x M10x1 short, DN10 DG10X-WRAS-418-L - 15mm PF x M10x1 short, DN10 DG50X-WRAS-219-L - 15mm PF x M12x1 short, DN10 DG10X-WRAS-419-L - 15mm PF x M12x1 short, DN10 DG50X-WRAS-220-L - ¾” BSP (F) x 15mm PF, DN10 DG10X-WRAS-420-L - ¾” BSP (F) x 15mm PF, DN10 DG50X-WRAS-221-L - 15mm PF x ½” BSP (F) elbow, DN10 DG10X-WRAS-421-L - 15mm PF x ½” BSP (F) elbow, DN10 DG50X-WRAS-222-L - 15mm comp x 15mm PF, DN10 DG10X-WRAS-422-L - 15mm comp x 15mm PF, DN10 DG50X-WRAS-223-L - 15mm PF x 15mm PF, DN10 DG10X-WRAS-423-L - 15mm PF x 15mm PF, DN10 DG50X-WRAS-224-L - ¾” BSP (F) x ¾” BSP (F), DN13 DG10X-WRAS-424-L - ¾” BSP (F) x ¾” BSP (F), DN13 DG50X-WRAS-225-L - 22mm comp x 22mm comp, DN13 DG10X-WRAS-425-L - 22mm comp x 22mm comp, DN13 DG50X-WRAS-226-L - 22mm PF x 22mm comp, DN13 DG10X-WRAS-426-L - 22mm PF x 22mm comp, DN13 DG50X-WRAS-227-L - 22mm PF x 22mm PF, DN13 DG10X-WRAS-427-L - 22mm PF x 22mm PF, DN13 DG50X-WRAS-228-L - ½” BSP (F) x M10 short, DN8 DG10X-WRAS-428-L - ½” BSP (F) x M10 short, DN8 DG50X-WRAS-229-L - ⅜” BSP (F) x M10 short, DN8 DG10X-WRAS-429-L - ⅜” BSP (F) x M10 short, DN8 DG50X-WRAS-230-L - 15mm comp x 15mm comp iso valve, DN10 DG10X-WRAS-430-L - 15mm comp x 15mm comp iso valve, DN10 DG50X-WRAS-231-L - ¾” BSP (F) x ¾” BSP (F) elbow, DN10 DG10X-WRAS-431-L - ¾” BSP (F) x ¾” BSP (F) elbow, DN10 DG50X-WRAS-232-L - ⅜” BSP (F) X ⅜” BSP (F), DN8 DG10X-WRAS-432-L - ⅜” BSP (F) X ⅜” BSP (F), DN8 DG50X-WRAS-233-L - ⅜” BSP (F) X ⅜” BSP (F) elbow, DN8 DG10X-WRAS-433-L - ⅜” BSP (F) X ⅜” BSP (F) elbow, DN8 DG50X-WRAS-234-L - ⅜” BSP (F) x ¼" BSP (F), DN8 DG10X-WRAS-434-L - ⅜” BSP (F) x ¼" BSP (F), DN8 DG50X-WRAS-235-L - ½” BSP (F) x ½" BSP (M), DN13 DG10X-WRAS-435-L - ½” BSP (F) x ½" BSP (M), DN13 DG50X-WRAS-236-L - 15mm comp x ½” BSP (M), DN13 DG10X-WRAS-436-L - 15mm comp x ½” BSP (M), DN13 DG50X-WRAS-237-L - ¾” BSP (F) x ¾" BSP (M), DN13 DG10X-WRAS-437-L - ¾” BSP (F) x ¾" BSP (M), DN13 DG50X-WRAS-238-L - ½” BSP (F) x ½” BSP (F) elbow, DN10 DG10X-WRAS-438-L - ½” BSP (F) x ½” BSP (F) elbow, DN10 DG50X-WRAS-239-L - ½” BSP (F) x ½” BSP (M), DN8 DG10X-WRAS-439-L - ½” BSP (F) x ½” BSP (M), DN8 DG50X-WRAS-240-L - ½” BSP (F) x ½” BSP (F), DN8 DG10X-WRAS-440-L - ½” BSP (F) x ½” BSP (F), DN8 DG50X-WRAS-241-L - ½” BSP (F) x 15mm comp iso valve, DN13 DG10X-WRAS-441-L - ½” BSP (F) x 15mm comp iso valve, DN13 DG50X-WRAS-242-L - ½” BSP (F) x ½” BSP (F), DN13 DG10X-WRAS-442-L - ½” BSP (F) x ½” BSP (F), DN13 DG50X-WRAS-243-L - ½” BSP (F) x 15mm comp, DN13 DG10X-WRAS-443-L - ½” BSP (F) x 15mm comp, DN13 DG50X-WRAS-244-L - 22mm comp x 22mm comp iso valve, DN13 DG10X-WRAS-444-L - 22mm comp x 22mm comp iso valve, DN13 DG50X-WRAS-245-L - 15mm comp x 15mm comp, DN13 DG10X-WRAS-445-L - 15mm comp x 15mm comp, DN13 DG50X-WRAS-246-L - 15mm comp x M12x1 short, DN10 DG10X-WRAS-446-L - 15mm comp x M12x1 short, DN10 DG50X-WRAS-247-L - ½” BSP (F) x 14.7mm comp iso valve, DN10 DG10X-WRAS-447-L - ½” BSP (F) x 14.7mm comp iso valve, DN10 DG50X-WRAS-248-L - ¾” BSP (F) x 21mm comp iso valve, DN13 DG10X-WRAS-448-L - ¾” BSP (F) x 21mm comp iso valve, DN13 DG50X-WRAS-249-L - 15mm comp x M12x1 long, DN10 DG10X-WRAS-449-L - 15mm comp x M12x1 long, DN10 DG50X-WRAS-250-L - ½” BSP (F) x M12x1 short, DN8 DG10X-WRAS-450-L - ½” BSP (F) x M12x1 short, DN8 DG50X-WRAS-251-L - ½” BSP (F) x 15mm PF, DN10 DG10X-WRAS-451-L - ½” BSP (F) x 15mm PF, DN10 DG50X-WRAS-252-L - ½” BSP (F) x 15mm PF iso valve, DN10 DG10X-WRAS-452-L - ½” BSP (F) x 15mm PF iso valve, DN10 DG50X-WRAS-253-L - ¾” BSP (F) x 22mm PF, DN13 DG10X-WRAS-453-L - ¾” BSP (F) x 22mm PF, DN13 DG50X-WRAS-254-L - ¾” BSP (F) x 22mm PF iso valve, DN13 DG10X-WRAS-454-L - ¾” BSP (F) x 22mm PF iso valve, DN13 DG50X-WRAS-255-L - ½” BSP (F) x 15mm PF, DN13 DG10X-WRAS-455-L - ½” BSP (F) x 15mm PF, DN13 DG50X-WRAS-256-L - ¾” BSP (F) x 15mm PF, DN13 DG10X-WRAS-456-L - ¾” BSP (F) x 15mm PF, DN13 DG50X-WRAS-257-L - ⅜” BSP (F) x M10x1 short, DN6 DG10X-WRAS-457-L - ⅜” BSP (F) x M10x1 short, DN6 DG50X-WRAS-258-L - ½” BSP (F) x M10x1 short, DN6 DG10X-WRAS-458-L - ½” BSP (F) x M10x1 short, DN6 DG50X-WRAS-259-L - ⅜” BSP (F) x M8x1 short, DN6 DG10X-WRAS-459-L - ⅜” BSP (F) x M8x1 short, DN6 DG50X-WRAS-260-L - ½” BSP (F) x M10x1 short, DN6 DG10X-WRAS-460-L - ½” BSP (F) x M10x1 short, DN6 DG50X-WRAS-261-L - ⅜” BSP (F) x M8x1 short, DN6 DG10X-WRAS-461-L - ⅜” BSP (F) x M8x1 short, DN6 DG50X-WRAS-262-L - ½” BSP (F) x 15mm PF, DN13 DG10X-WRAS-462-L - ½” BSP (F) x 15mm PF, DN13 DG50X-WRAS-263-L - ¾” BSP (F) x 15mm PF, DN13 DG10X-WRAS-463-L - ¾” BSP (F) x 15mm PF, DN13 DG50X-WRAS-264-L - M12x1 short x M8x1 short DG10X-WRAS-464-L - M12x1 short x M8x1 short DG50X-WRAS-265-L - M12x1 short x M8x1 short DG50X-WRAS-465-L - M12x1 short x M8x1 short DG50X-WRAS-266-L - F ½” BSP x 15mm push-fit iso valve DG50X-WRAS-466-L - F ½” BSP x 15mm push-fit iso valve Models added April 2025: DG10X-376-006-L, ½” BSP (F) x M8x1 short, DN6 DG10X-376-008-L, ½” BSP (F) x M8x1 short, DN8 DG50X-376-010-L, ½” BSP (F) x M8x1 short, DN6 DG50X-376-012-L, ½” BSP (F) x M8x1 short, DN8 Models added August 2025: DG10X-WRAS-469-L, ½” BSP (F) x ⅜” BSP (F), DN6 DG10X-WRAS-470-L, ½” BSP (F) x ⅜” BSP (F), DN8 DG10X-WRAS-471-L, 15mm push-fit x ½" BSP (M), DN10 DG10X-WRAS-472-L, ¾” BSP (F) x 22mm push-fit , DN13 DG10X-WRAS-477-L, ½” BSP (F) x M10 long, DN10 DG10X-WRAS-478-L, ½” BSP (F) x M10 short, DN10 DG10X-WRAS-479-L, ½" BSP (M)x M10 long, DN10 DG10X-WRAS-480-L, ½" BSP (M)x M10 short, DN10

Product Images

Approval Holder:

Fanski Group Inc

Company Name

Fanski Group Inc

Address

NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600

Country

China

View All Listings by this Company

Manufacturer:

Fanski Group Inc

Company Name

Fanski Group Inc

Address

NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600

Country

China

View All Listings by this Company

Range of stainless-steel interlocked shower hoses and shower hose extension pieces (smaller length versions) incorporating PE/EPDM and PEX inner tube materials. Available with various surface finishes and end connectors. For further details see model section. Maximum working pressure open outlet use. Maximum operating temperature 85.0°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240402049

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP captive nut. M15x1. All connection sizes can be used with every model of hose.

Marking:

CONST (trademark of Ningbo Jinxing Flexible Pipe Co., LTD), WRAS, KS & year of manufacture (YYYY)

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Model：KS-XXXXXXXX 1st X stands for out diameter: from 13mm to 17mm +/-0.3mm (PVC tube use size 14mm and 15mm) 2nd X stands for outer material: S=stainless steel, B=brass, P=PVC，(PVC outer tube only with PVC inside tube) 3rd X stands for the surface treatment: C=chrome plated, P=stainless steel natural color, B=black, S=sliver, G=Gold,/Gray 4th X stands for fittings material: B=brass, S=stainless steel, Z=Zinc Alloy P=ABS 5th X stands for fittings size and shape: 1/2’ 3/8’ M15x1, M16x1,(M15*1,M16*1 use brass material only use size 13mm and 14mm only) Fitting shape find the attached1. 6th X stands for hose nipple material: B=brass, S=stainless steel, P=POM, N=Nylon 7th X stands for inner tube material:, PVC, EPDM，PEX (EPDM,PEX, tube only use with stainless steel and brass out side) 8th X stands for hose length from 10cm to 300cm. 9th X stands for the fitting number end connection type), which can be a number from 1 to 29, or 51 to 72 with the prefix: Nut and suffix: #, (if different end connection types are used two numbers will be provided Size 1/2” 3/8” (only used for stainless steel outer material) Size M15*1 M16*1 ( use brass material only, use size 13mm and 14mm only) Limits: 1. Size 1/2”can use all fitting number except #51 2. Size 1/2” 3/8” can use #13 and #30， but they are only used for stainless steel outer material. 3. #30 is used for stainless steel outer material and surface treatment of stainless steel natural color Size M15*1 only use #51, M15*1,M16*1 use size 13mm and 14mm only 4. ABS is only used in fitting size of 1/2’ 5. Only 14mm diameter is used nipple materials of stainless steel，POM and Nylon；other diameter only used brass material 6. EPDM,TPE tube only use with stainless steel and brass out side Model code example: KS-17SCB1/2”1/2”SPEX150 Nut 4# & 16#. This gives a 17mm hose with stainless steel interlocked outer, chrome surface finish, brass fittings, ½” end connections at each end, stainless steel nipples, PEX hose inner, 150cm length, end connections type Nut number 4 and 16.

Product Images

Approval Holder:

Ningbo Jinxing Flexible Pipe Co.,LTD

Company Name

Ningbo Jinxing Flexible Pipe Co.,LTD

Address

No.1 Beixing RD , Mazhu Town, Yuyao City

Phone

62462608

General Email

sale@nbjinxing.com

View All Listings by this Company

Manufacturer:

Ningbo Jinxing Flexible Pipe Co.,LTD

Company Name

Ningbo Jinxing Flexible Pipe Co.,LTD

Address

No.1 Beixing RD , Mazhu Town, Yuyao City

Phone

62462608

General Email

sale@nbjinxing.com

View All Listings by this Company

Range of (grey or black) nylon or polyethylene braided flexible hose assemblies comprising of a multi-layered hose with a black HDPE outer layer and green PEX inner layer. End connections can incorporate an ‘O’-ring, a washer and/or a V-ring. Washers and ‘O’-rings are EPDM, the V-ring is silicone. Maximum operating temperature 60°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240202050

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

See model

Marking:

Solex, WRAS & date of manufacture (MM/YY) on ferrule.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

H36 ANTI-TWIST Range: H36X0002S-01: Ø11mm quick connect inlet x ½” captive nut outlet, H36X0002S-02: Ø11mm quick connect inlet x M18*1.5” (F) outlet, H36X0002S-03: M15 (M) inlet x ½” captive nut outlet, H36X0002S-04: M15 (M) inlet x M15 (M) outlet, H36X0002S-05: Ø11mm quick connect inlet x M15 (F) outlet.

Product Images

Approval Holder:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

Manufacturer:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

Multi-layer PVC shower hoses with silver coating, brass end connections, EPDM gasket and NBR ‘O’-ring. Open outlet use only. Maximum operating temperature 65°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240502017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) x ½” BSP (F)

Marking:

Hualing logo, WRAS and year of manufacture YYYY on ferrule.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

FF1212-WRAS.

Product Images

Approval Holder:

Kaiping City Hualing Hoses Co Ltd

Company Name

Kaiping City Hualing Hoses Co Ltd

Address

No.18 East Road, Industrial Park Shuikou Town Kaiping City Guangdong Province

Country

CHINA

View All Listings by this Company

Manufacturer:

Kaiping City Hualing Hoses Co Ltd

Company Name

Kaiping City Hualing Hoses Co Ltd

Address

No.18 East Road, Industrial Park Shuikou Town Kaiping City Guangdong Province

Country

CHINA

View All Listings by this Company

Adaptor assembly consisting of a brass fitting with EPDM washer and PEX hose. Open outlet use only Maximum operating temperature 60°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240502050

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models below

Marking:

Wuxi Jinhua, date of manufacture (YYYY) WRAS on hose.

Installation Requirements:

R001 R008

Expiry date:

31/05/2029

Model:

GJS/E-BSW8788 - ½” BSP (F) GCUZ02K.005.0 – 7/16” UNS (F) Adaptor GCUZ02K.006.0 – ¾” BSP (F) Adaptor

Product Images

Approval Holder:

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Address

No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province

Country

China

View All Listings by this Company

Manufacturer:

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Address

No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province

Country

China

View All Listings by this Company

Range of nylon braided (DG50E model series) or stainless steel braided (DG10E model series), EPDM lined flexible hose assemblies with a variety of end connections (see models for full breakdown), including EPDM washers and ‘O’-rings where applicable. Some models are supplied with screwdriver operated isolation valves (see model list). All compression and push-fit fittings are to be used with copper pipe (manufactured to BS EN 1057). Maximum working pressure: 16 bar. Maximum operating temperature: 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240402030

Size:

See models below. Note: Comp = compression, PF = push-fit

Marking:

Fanski, WRAS and year of manufacture (YYYY) on ferrule

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

DG50E-WRAS-100-L - 15mm comp x M10 short, DN8 DG10E-WRAS-300-L - 15mm comp x M10 short, DN8 DG50E-WRAS-101-L - 15mm comp x M12 short, DN8 DG10E-WRAS-301-L - 15mm comp x M12 short, DN8 DG50E-WRAS-102-L - ⅜” BSP (F) x 10mm comp, DN10 DG10E-WRAS-302-L - ⅜” BSP (F) x 10mm comp, DN10 DG50E-WRAS-103-L - ½” BSP (F) elbow x 15mm comp, DN10 DG10E-WRAS-303-L - ½” BSP (F) elbow x 15mm comp, DN10 DG50E-WRAS-104-L - ½” BSP (F) x ½” BSP (F), DN10 DG10E-WRAS-304-L - ½” BSP (F) x ½” BSP (F), DN10 DG50E-WRAS-105-L - ½” BSP (F) x 15mm comp iso valve, DN10 DG10E-WRAS-305-L - ½” BSP (F) x 15mm comp iso valve, DN10 DG50E-WRAS-106-L - 15mm PF x 15mm PF iso valve, DN10 DG10E-WRAS-306-L - 15mm PF x 15mm PF iso valve, DN10 DG50E-WRAS-107-L - ¾” BSP (F) x 22mm comp iso valve, DN13 DG10E-WRAS-307-L - ¾” BSP (F) x 22mm comp iso valve, DN13 DG50E-WRAS-108-L - ¾” BSP (F) x 22mm comp, DN13 DG10E-WRAS-308-L - ¾” BSP (F) x 22mm comp, DN13 DG50E-WRAS-109-L - 22mm PF x 22mm PF iso valve, DN13 DG10E-WRAS-309-L - 22mm PF x 22mm PF iso valve, DN13 DG50E-WRAS-110-L - ⅜” BSP (F) x 15mm comp, DN10 DG10E-WRAS-310-L - ⅜” BSP (F) x 15mm comp, DN10 DG50E-WRAS-111-L - ½” BSP (F) x 15mm comp, DN10 DG10E-WRAS-311-L - ½” BSP (F) x 15mm comp, DN10 DG50E-WRAS-112-L - 10mm comp x 15mm comp, DN10 DG10E-WRAS-312-L - 10mm comp x 15mm comp, DN10 DG50E-WRAS-113-L - 15mm comp x 15mm comp, DN10 DG10E-WRAS-313-L - 15mm comp x 15mm comp, DN10 DG50E-WRAS-114-L - ¾” BSP (F) x 15mm comp, DN10 DG10E-WRAS-314-L - ¾” BSP (F) x 15mm comp, DN10 DG50E-WRAS-115-L - 15mm comp x 22mm comp, DN10 DG10E-WRAS-315-L - 15mm comp x 22mm comp, DN10 DG50E-WRAS-116-L - ½” BSP (F) x 22mm comp, DN10 DG10E-WRAS-316-L - ½” BSP (F) x 22mm comp, DN10 DG50E-WRAS-117-L - ¾” BSP (F) x 15mm comp iso valve, DN10 DG10E-WRAS-317-L - ¾” BSP (F) x 15mm comp iso valve, DN10 DG50E-WRAS-118-L - 15mm PF x M10x1 short, DN10 DG10E-WRAS-318-L - 15mm PF x M10x1 short, DN10 DG50E-WRAS-119-L - 15mm PF x M12x1 short, DN10 DG10E-WRAS-319-L - 15mm PF x M12x1 short, DN10 DG50E-WRAS-120-L - ¾” BSP (F) x 15mm PF, DN10 DG10E-WRAS-320-L - ¾” BSP (F) x 15mm PF, DN10 DG50E-WRAS-121-L - 15mm PF x ½” BSP (F) elbow, DN10 DG10E-WRAS-321-L - 15mm PF x ½” BSP (F) elbow, DN10 DG50E-WRAS-122-L - 15mm comp x 15mm PF, DN10 DG10E-WRAS-322-L - 15mm comp x 15mm PF, DN10 DG50E-WRAS-123-L - 15mm PF x 15mm PF, DN10 DG10E-WRAS-323-L - 15mm PF x 15mm PF, DN10 DG50E-WRAS-124-L - ¾” BSP (F) x ¾” BSP (F), DN13 DG10E-WRAS-324-L - ¾” BSP (F) x ¾” BSP (F), DN13 DG50E-WRAS-125-L - 22mm comp x 22mm comp, DN13 DG10E-WRAS-325-L - 22mm comp x 22mm comp, DN13 DG50E-WRAS-126-L - 22mm PF x 22mm comp, DN13 DG10E-WRAS-326-L - 22mm PF x 22mm comp, DN13 DG50E-WRAS-127-L - 22mm PF x 22mm PF, DN13 DG10E-WRAS-327-L - 22mm PF x 22mm PF, DN13 DG50E-WRAS-128-L - ½” BSP (F) x M10 short, DN8 DG10E-WRAS-328-L - ½” BSP (F) x M10 short, DN8 DG50E-WRAS-129-L - ⅜” BSP (F) x M10 short, DN8 DG10E-WRAS-329-L - ⅜” BSP (F) x M10 short, DN8 DG50E-WRAS-130-L - 15mm comp x 15mm comp iso valve, DN10 DG10E-WRAS-330-L - 15mm comp x 15mm comp iso valve, DN10 DG50E-WRAS-131-L - ¾” BSP (F) x ¾” BSP (F) elbow, DN10 DG10E-WRAS-331-L - ¾” BSP (F) x ¾” BSP (F) elbow, DN10 DG50E-WRAS-132-L - ⅜” BSP (F) X ⅜” BSP (F), DN8 DG10E-WRAS-332-L - ⅜” BSP (F) X ⅜” BSP (F), DN8 DG50E-WRAS-133-L - ⅜” BSP (F) X ⅜” BSP (F) elbow, DN8 DG10E-WRAS-333-L - ⅜” BSP (F) X ⅜” BSP (F) elbow, DN8 DG50E-WRAS-134-L - ⅜” BSP (F) x ¼" BSP (F), DN8 DG10E-WRAS-334-L - ⅜” BSP (F) x ¼" BSP (F), DN8 DG50E-WRAS-135-L - ½” BSP (F) x ½" BSP (M), DN13 DG10E-WRAS-335-L - ½” BSP (F) x ½" BSP (M), DN13 DG50E-WRAS-136-L - 15mm comp x ½” BSP (M), DN13 DG10E-WRAS-336-L - 15mm comp x ½” BSP (M), DN13 DG50E-WRAS-137-L - ¾” BSP (F) x ¾" BSP (M), DN13 DG10E-WRAS-337-L - ¾” BSP (F) x ¾" BSP (M), DN13 DG50E-WRAS-138-L - ½” BSP (F) x ½” BSP (F) elbow, DN10 DG10E-WRAS-338-L - ½” BSP (F) x ½” BSP (F) elbow, DN10 DG50E-WRAS-139-L - ½” BSP (F) x ½” BSP (M), DN8 DG10E-WRAS-339-L - ½” BSP (F) x ½” BSP (M), DN8 DG50E-WRAS-140-L - ½” BSP (F) x ½” BSP (F), DN8 DG10E-WRAS-340-L - ½” BSP (F) x ½” BSP (F), DN8 DG50E-WRAS-141-L - ½” BSP (F) x 15mm comp iso valve, DN13 DG10E-WRAS-341-L - ½” BSP (F) x 15mm comp iso valve, DN13 DG50E-WRAS-142-L - ½” BSP (F) x ½” BSP (F), DN13 DG10E-WRAS-342-L - ½” BSP (F) x ½” BSP (F), DN13 DG50E-WRAS-143-L - ½” BSP (F) x 15mm comp, DN13 DG10E-WRAS-343-L - ½” BSP (F) x 15mm comp, DN13 DG50E-WRAS-144-L - 22mm comp x 22mm comp iso valve, DN13 DG10E-WRAS-344-L - 22mm comp x 22mm comp iso valve, DN13 DG50E-WRAS-145-L - 15mm comp x 15mm comp, DN13 DG10E-WRAS-345-L - 15mm comp x 15mm comp, DN13 DG50E-WRAS-146-L - 15mm comp x M12x1 short, DN10 DG10E-WRAS-346-L - 15mm comp x M12x1 short, DN10 DG50E-WRAS-147-L - ½” BSP (F) x 14.7mm comp iso valve, DN10 DG10E-WRAS-347-L - ½” BSP (F) x 14.7mm comp iso valve, DN10 DG50E-WRAS-148-L - ¾” BSP (F) x 21mm comp iso valve, DN13 DG10E-WRAS-348-L - ¾” BSP (F) x 21mm comp iso valve, DN13 DG50E-WRAS-149-L - 15mm comp x M12x1 long, DN10 DG10E-WRAS-349-L - 15mm comp x M12x1 long, DN10 DG50E-WRAS-150-L - ½” BSP (F) x M12x1 short, DN8 DG10E-WRAS-350-L - ½” BSP (F) x M12x1 short, DN8 DG50E-WRAS-151-L - ½” BSP (F) x 15mm PF, DN10 DG10E-WRAS-351-L - ½” BSP (F) x 15mm PF, DN10 DG50E-WRAS-152-L - ½” BSP (F) x 15mm PF iso valve, DN10 DG10E-WRAS-352-L - ½” BSP (F) x 15mm PF iso valve, DN10 DG50E-WRAS-153-L - ¾” BSP (F) x 22mm PF, DN13 DG10E-WRAS-353-L - ¾” BSP (F) x 22mm PF, DN13 DG50E-WRAS-154-L - ¾” BSP (F) x 22mm PF iso valve, DN13 DG10E-WRAS-354-L - ¾” BSP (F) x 22mm PF iso valve, DN13 DG50E-WRAS-155-L - ½” BSP (F) x 15mm PF, DN13 DG10E-WRAS-355-L - ½” BSP (F) x 15mm PF, DN13 DG50E-WRAS-156-L - ¾” BSP (F) x 15mm PF, DN13 DG10E-WRAS-356-L - ¾” BSP (F) x 15mm PF, DN13 DG50E-WRAS-157-L - ⅜” BSP (F) x M10x1 short, DN6 DG10E-WRAS-357-L - ⅜” BSP (F) x M10x1 short, DN6 DG50E-WRAS-158-L - ½” BSP (F) x M10x1 short, DN6 DG10E-WRAS-358-L - ½” BSP (F) x M10x1 short, DN6 DG50E-WRAS-159-L - ⅜” BSP (F) x M8x1 short, DN6 DG10E-WRAS-359-L - ⅜” BSP (F) x M8x1 short, DN6 DG50E-WRAS-160-L - ½” BSP (F) x M10x1 short, DN6 DG10E-WRAS-360-L - ½” BSP (F) x M10x1 short, DN6 DG50E-WRAS-161-L - ⅜” BSP (F) x M8x1 short, DN6 DG10E-WRAS-361-L - ⅜” BSP (F) x M8x1 short, DN6 DG50E-WRAS-162-L - ½” BSP (F) x 15mm PF, DN13 DG10E-WRAS-362-L - ½” BSP (F) x 15mm PF, DN13 DG50E-WRAS-163-L - ¾” BSP (F) x 15mm PF, DN13 DG10E-WRAS-363-L - ¾” BSP (F) x 15mm PF, DN13 DG50X-WRAS-164-L - M12x1 short x M8x1 short DG10X-WRAS-364-L - M12x1 short x M8x1 short DG50X-WRAS-165-L - M12x1 short x M8x1 short DG50X-WRAS-365-L - M12x1 short x M8x1 short DG50X-WRAS-166-L - F ½” BSP x 15mm push-fit iso valve DG50X-WRAS-366-L - F ½” BSP x 15mm push-fit iso valve Models added July 2025: DG10E-WRAS-465-L, ½” BSP (F) x ⅜” BSP (F), DN6, DG10E-WRAS-466-L, ½” BSP (F) x ⅜” BSP (F), DN8, DG10E-WRAS-467-L, 15mm push-fit x ½" BSP (M), DN10, DG10E-WRAS-468-L, ¾” BSP (F) x 22mm push-fit , DN13, DG10E-WRAS-473-L, ½” BSP (F) x M10 long, DN10, DG10E-WRAS-474-L, ½” BSP (F) x M10 short, DN10, DG10E-WRAS-475-L, ½" BSP (M)x M10 long, DN10, DG10E-WRAS-476-L, ½" BSP (M)x M10 short, DN10.

Product Images

Approval Holder:

Fanski Group Inc

Company Name

Fanski Group Inc

Address

NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600

Country

China

View All Listings by this Company

Manufacturer:

Fanski Group Inc

Company Name

Fanski Group Inc

Address

NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600

Country

China

View All Listings by this Company