One-piece (white) HDPE plastic storage cistern with lid. Maximum operating temperature 60°C.

Section:

0130 Cisterns

Section Subtitle:

Cold-water storage and lids - plastics. Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Section 7, Paragraph 4, of the Water Supply (Water Fittings) Regulations 1999.

WRAS Approval Number:

2012015

Note:

Not supplied with a wholesome water kit.

Size:

300 litres – 1,000 litres. In January 2024 the size range was extended up to 30,000 litres.

Marking:

Models BM3, BM5, BM6, BM7.5 & BM10: PNF logo, capacity, made in KSA, date of manufacture (DD/MM/YY) on body. PNF logo on lid. All other models: MNT (brand of National Factory for Fiberglass), capacity, made in KSA, date of manufacture (DD/MM/YY) on body.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

BM3, BM5, BM6, BM7.5 & BM10 Model added January 2024: BM15 to BM300 (30,000 Litres). LID1 (plastic lid).

Approval Holder:

National Factory for Fiberglass

Company Name

National Factory for Fiberglass

Postcode

31472

Country

Saudi Arabia

General Email

kandan.m@mnt-sa.com

View All Listings by this Company

Manufacturer:

National Factory for Fiberglass

Company Name

National Factory for Fiberglass

Postcode

31472

Country

Saudi Arabia

General Email

kandan.m@mnt-sa.com

View All Listings by this Company

Range of hot pressed moulded GRP sectional cold water storage cisterns. Larger cisterns are fitted with PVC roof supports and are supplied with stainless steel ladders, tie rods, braces and hatches. Cold water use only.

Section:

0135 Cisterns

Section Subtitle:

Cold-water storage with cover or roof - plastic, sectional. Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.

WRAS Approval Number:

2012027

Note:

NON POTABLE USE ONLY.

Size:

SEE MODEL

Marking:

Mitsubishi chemical infratec, capacity & product info on label on body. Mitsubishi chemical infratec on lid.

Installation Requirements:

R001 R270 R280

Expiry date:

31/12/2025

Model:

Hishitank GE & GSE 1000 Litres – 430,000 Litres

Product Images

Approval Holder:

Mitsubishi Chemical Infratec Co., Ltd.

Company Name

Mitsubishi Chemical Infratec Co., Ltd.

Address

1-1, Marunouchi 1-Chome, Chiyoda-ku, Tokyo 100-8251

Country

Japan

Phone

+81-80-2683-2994

General Email

yusuke.nakao.ma@mcgc.com

View All Listings by this Company

An aerator attachment for a mixer tap with a black plastic body and NBR O-rings. The outlet incorporates a stainless-steel strainer. This product incorporates swivel joint and a mechanism that alters the flow from jet to spray. Maximum working temperature 60°C.

Section:

0435 Taps and shower valves - Components

Section Subtitle:

Aerators, Flow Straighteners, Flow Regulators and Restrictors.

WRAS Approval Number:

2012057

Note:

Open outlet use only.

Size:

M22 thread

Marking:

Siroflex Italy on body.

Installation Requirements:

R001 R040

Expiry date:

31/12/2025

Model:

G&N 073 mixer tap attachment.

Product Images

Approval Holder:

G&N International

Company Name

G&N International

View All Listings by this Company

Manufacturer:

Siroflex

Company Name

Siroflex

Address

View All Listings by this Company

Range of ceramic cartridge headworks with NBR ‘O’-rings and silicone seals or silicone ‘O’-rings and seals (depending on model). For insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Models 35H-F, 40D-F & 40H-F have a maximum operating temperature of 60°C. All other models have a maximum operating temperature of 85°C.

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

2012703

Size:

35 prefix models: Ø35mm. 40 prefix models: Ø40mm.

Marking:

Wanhai and model on body.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

35PH-1, 35P-1 & 35H-F. 40D-F, 40H-F, 35H-5, 40H-5 & 40D-5.

Approval Holder:

Ningbo Wanhai Cartridge Technology Co. Ltd.

Company Name

Ningbo Wanhai Cartridge Technology Co. Ltd.

Address

Xiachen Development Zone, Chunhu, Fenghua

Country

Zhejiang, China

View All Listings by this Company

Manufacturer:

Ningbo Wanhai Cartridge Technology Co. Ltd.

Company Name

Ningbo Wanhai Cartridge Technology Co. Ltd.

Address

Xiachen Development Zone, Chunhu, Fenghua

Country

Zhejiang, China

View All Listings by this Company

Range of ceramic cartridge headworks with plastic bodies incorporating silicone seals for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

2011063

Size:

19mm

Marking:

Manufacturer’s logo, model and date of manufacture (DDMMYY) on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

19C & 19H

Product Images

Approval Holder:

Shanghai Gear Plastic Co., Ltd.

Company Name

Shanghai Gear Plastic Co., Ltd.

Address

Block 1, No. 33, Jucheng Road, Jiading District, Shanghai

Country

China

Phone

+86 21 59902528

General Email

www.gearcartridge.com

View All Listings by this Company

Manufacturer:

Shanghai Gear Plastic Co., Ltd.

Company Name

Shanghai Gear Plastic Co., Ltd.

Address

Block 1, No. 33, Jucheng Road, Jiading District, Shanghai

Country

China

Phone

+86 21 59902528

General Email

www.gearcartridge.com

View All Listings by this Company