Combination Tap Assemblies

Section Code 0682 : Spout outlet(s).

Back To Directory Sections

#240202038

Range of deck mounted swivel spout outlets (brass bodies – chrome plated) incorporating aplastic flow straightener. The products are supplied with plastic back nuts. Maximum working pressure 5.0 bar Maximum operating temperature 60.0°C

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
240202038
Size:
½” BSP (M)
Marking:
Delabie logo on housing
Installation Requirements:
R001 R006
Expiry date:
28/02/2029
Model:
967152 967202
Product Images
Approval Holder:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

Print This Approval

#240402048

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes - see model). Electronic controls on the left-hand side of the body allow the tap to dispense one or more of the following (model specification dependent): boiling, chilled or sparkling water. Ambient (hot and cold) water is controlled via a ceramic cartridge headwork with a single lever operating member. The spout incorporates a plastic aerator on the Sparkling/Chilled and the Ambient outlet, and a separate outlet for the boiling water. Both model ranges incorporate a vent outlet within the tap spout for the boiling water circuit. Maximum working pressure 5.0 bar (Ambient (hot and cold) circuit only). 95458xxx models - Boiling circuit has a maximum operating temperature of 100°C. All other circuits have a maximum operating temperature of 65°C. 95459xxx models - Boiling circuit has a maximum operating temperature of 100°C. The ambient circuit has a maximum operating temperature of 65°C. The chilled/sparkling circuit has a maximum operating temperature of 60°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
240402048
Note:
Boiling, chilled or sparkling water circuits - Open outlet use only. These taps are designed to only work with the Zip HydroTap Command Centres, (sold separately). R008 applies to the pushfit fittings.
Size:
Ambient hot and cold inlets: Hot: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connection. Cold: ½” BSP (F) to tee piece installed prior to a stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connection. Boiling water: 8mm OD s/steel spigot (attached to tubing). Chilled or Chilled/sparkling water (model dependent): 8mm OD s/steel spigot (attached to tubing).
Marking:
ZIP on operating member
Installation Requirements:
R001 R006 R007 R008 R009
Expiry date:
30/04/2029
Model:
Celsius Plus All-in-one Boiling/Chilled: 95458xxx. Celsius Plus All-in-one Boiling/Chilled/Sparkling: 95459xxx. Where xxx denotes finish and can be replaced with: Z00 = Chrome, Z01 = Brushed Chrome, Z03 = Matt Black.
Product Images
Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Country
United Kingdom
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Print This Approval

#240402057

Deck mounted, fixed, bath spout (brass bodies with various finishes) with a manual diverter to shower. Maximum working pressure 5.0 bar. Maximum operating temperature 85 °C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
240402057
Size:
½” BSP (M).
Marking:
Lefroy Brooks logo on underside of spout.
Installation Requirements:
R001 R005 R020
Expiry date:
30/04/2029
Model:
PSH008 YY. Understanding the product codes: First group of three letters and three numbers (PSH008). These are codes that remains constant and relate to the individual design of the spout. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the finish. Available surface finishes are, but not limited to: - CP - Polished Chrome - NK - Polished Nickel - BC - Brushed Chrome - BN - Brushed Nickel - PB - Polished Brass - BPB - Brushed Brass - AB - Aged Brass - TA - Taunton - AG - Antique Gold - HRG - Hard Rubbed Gold - CM - Champagne Gold - BCM - Brushed Champagne Gold - CO - Copper - MBC - Matt Black Chrome
Product Images
Approval Holder:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Unit 3 Marston Industrial Estate Marston Road Wolverhampton
Postcode
WV2 4LX
Country
United Kingdom
Phone
01902 390 891
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval

#240502013

Wall mounted spout outlet with chromium plated brass body, incorporating a plastic flow regulator in the inlet. Open outlet use. Maximum operating temperature: 60°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
240502013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP (M).
Marking:
Dornbracht on spout.
Installation Requirements:
R001 R040
Expiry date:
31/05/2029
Model:
Deque - 13430740.
Product Images
Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval

#240504002

Range of wall mounted spout outlets (brass bodies – various finishes), incorporating a plastic aerator. Open outlet use only. Maximum operating temperature 65°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
240504002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½”BSP(M) – ½” BSP (M) Adapter
Marking:
C.P. Hart on faceplate
Installation Requirements:
R001 R040
Expiry date:
31/05/2029
Model:
CPH0323 （CP/MB/BRG/BGM/BB/BN/PB） Each product in seven colors CP：Chrome plating MB：Matt black BRG：Brushed rose gold BGM：Gun mental BB：Brushed brass BN：Brushed nickel PB：polished black
Product Images
Approval Holder:
C.P.Hart
Company Name
C.P.Hart
Address
Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford
Postcode
DA2 6QA
Country
United Kingdom
General Email
roy.davis@cphart.co.uk

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 16 of 24

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.