Range of WC flush valves with an ABS body and silicon seal. The valves are operated via a push button assembly for either full or reduced flush and incorporate an internal adjustable height overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

240202707

Size:

2” BSP (M)

Marking:

Fluidmaster on body

Installation Requirements:

R001 R571 R581

Expiry date:

28/02/2029

Model:

820WB-FEP 821WB-FEP 821WB-AEP-001 820074 PRO820UK

Product Images

Approval Holder:

Fluidmaster, Inc.

Company Name

Fluidmaster, Inc.

Address

30800 Rancho Viejo Road San Juan Capistrano

Postcode

CA 92675

Country

United States

Phone

1-949-796-2653

General Email

jloera@fluidmaster.com

View All Listings by this Company

Single flush WC outlet valves with an ABS plastic body (TSL721 WC99-016) operated via a mains powered infra red sensor assembly TSL721 (WC99-016A). Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2311372

Size:

1 ½” BSP(M)

Marking:

The Splash Lab on adhesive label on cable.

Installation Requirements:

R001 R571 R572

Expiry date:

30/11/2028

Model:

TSL721 WC99-016 (flush valve) To be installed using the following kit: TSL721 WC99-016A (flush valve kit)

Approval Holder:

The Splash Lab UK

Company Name

The Splash Lab UK

Address

Unit 34 Meadow Industrial Estate Stockport

Postcode

SK1 2BU

Country

United Kingdom

View All Listings by this Company

Range of plate heat exchangers with pressed stainless steel plate bodies and copper brazing. Available with threaded or flat face seal connection (see model). Maximum working pressure varies by model: ZT190 & ZT207 - 8.0 bar; ZB190, ZB195, ZB200, ZB207 & ZB315 - 10.0 bar; ZC315 (flat face seal version only) - 16.0 bar; ZC190, ZC207, ZC315 (threaded only) & Z(B-C-E) 250, 400, 450, 500 – 30.0 bar or 45.0 bar (models with additional upper and lower plates only); ZB600 & ZB700 - 30.0 bar. Maximum operating temperature 99°C.

Section:

1350 Heat Exchangers

Size:

Threaded models: ⅛” - 2½” BSP (M or F) Flat face seal models: ZB190: 4 orifices Ø 16 mm, ZB207: 2 orifices Ø 18 mm for the primary circuit, 2 orifices Ø 16 mm for the secondary circuit, ZT207: 4 orifices Ø 14 mm, ZB315: 4 orifices Ø 16 mm, ZC315: 4 orifices Ø 16 mm.

Marking:

Zilmet and product information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

Threaded (8-80 plates): Z(B-C-T)190, Z(B)195, Z(B)200, Z(B-C-T)207, Z(B-C)315. Threaded (10-150 plates): Z(B-C-E)250, Z(B-C-E)400, Z(B-C-E)500, Z(B)600, Z(B)700. Threaded (10-200 plates): Z(B-C-E)450. Flat face seal (8-80 plates): ZB190, ZB207, ZT207, ZB315, ZC315.

Approval Holder:

Zilmet UK Limited

Company Name

Zilmet UK Limited

Address

Airfield Industrial Estate, Hixon, Stafford

Postcode

ST18 0PF

Phone

01889 272 185

General Email

sales@zilmet.co.uk

View All Listings by this Company

Manufacturer:

Zilmet Spa

Company Name

Zilmet Spa

Address

35010 Limena (Padova) Via Del Santo 242 Italy

Phone

+ 49 8840662 Fax: + 49 767321 Telex: 430181

General Email

View All Listings by this Company

Wall mounted electric instantaneous water heater. The inlet incorporates a plastic flow sensor with strainer. Maximum working pressure 6.0 Bar Maximum operating temperature 55.0°C

Section:

1360 Heaters

Section Subtitle:

Electric instantaneous, mains fed, closed outlet. Heat retained in instantaneous water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

240202708

Size:

½” BSP (M).

Marking:

Water Waiter, Genius zero carbon solutions Ltd, model, max pressure and other technical information on label.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

WW131070

Product Images

Approval Holder:

Genius Zero Carbon Solutions Ltd

Company Name

Genius Zero Carbon Solutions Ltd

Address

21 CHURCH ROAD, PARKSTONE, POOLE, ENGLAND, BH14 8UF

View All Listings by this Company

Range of wall mounted combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system. The primary circuit incorporates a pressure relief valve set at 3.0 bar and an expansion vessel. The secondary circuit (DHW) incorporates a plastic flow restrictor and stainless-steel filter. The primary and secondary circuit incorporates isolation valves on the flow and the primary also has one on the return. Maximum working pressures: Secondary DHW: 10.0 Bar Primary CH: 2.5 Bar Maximum operating temperatures: Secondary DHW: 65.0°C Primary CH: 85.0°C

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

240202716

Size:

DHW: 22mm compression. CH: 22mm compression

Marking:

Vaillant logo, serial number, CE, pressure and other technical information on adhesive label on bottom of unit

Installation Requirements:

R001 R140 R360

Expiry date:

28/02/2029

Model:

0010019980 – VUW 246/7-2 (H-GB) ecoTec sustain 24 0010019981 – VUW 286/7-2 (H-GB) ecoTec sustain 28 0010019982 – VUW 346/7-2 (H-GB) ecoTec sustain 34

Product Images

Approval Holder:

Vaillant GmbH

Company Name

Vaillant GmbH

Address

Berghauser Strasse, 40 D-42859 Remscheid

Country

Germany

Phone

Tel: +49 2191 182126

View All Listings by this Company