'JSGL-OPC (N)'. Factory applied, grey coloured Ordinary Portland Cement. Mix and apply as per manufacturer's work instructions 'JSGL/WI/14', issue '02', revision '00', dated '29.09.2018'. Cure for 4 hours@45°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2011555

Expiry date:

30/11/2025

Approval Holder:

Jindal Saw Gulf LLC.

Company Name

Jindal Saw Gulf LLC.

Address

PO Box 92135, Plot No. 11 NR28, ICAD-III, Mussafah, Abu Dhabi

Country

United Arab Emirates

View All Listings by this Company

'Ascent-01'. Factory applied, grey coloured, Portland cement mortar. Mix sand, cement and water in a weight ratio of 1:1:0.35 and apply as per manufacturer's user instructions 'doc: Ascent-01', 'vision: A08052023', dated '2023-05-08'. Cure for 24 hours@25°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2310518

Expiry date:

31/10/2028

Approval Holder:

Shanxi Ascent Industrial Co., Ltd.

Company Name

Shanxi Ascent Industrial Co., Ltd.

Address

Floor 8, Tianjia Building, Xiaodian District, Taiyuan, Shanxi

Country

China

View All Listings by this Company

'LOCTITE GeoSpray Mortar'. Site applied, grey coloured, geopolymer cementitious material. Mix 300g of powder with 60ml water and apply as per manufacturer's instructions 'V: 09.06.2022'. Cure for 96 hours@3°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2310509

Expiry date:

31/10/2028

Approval Holder:

Henkel Corporation

Company Name

Henkel Corporation

Address

One Henkel Way, Rocky Hill, 06067

Country

United States

View All Listings by this Company

'GRP-GEI-Fiberstrong Pipe'. GRP pipe, manufactured by filament winding, which is light green coloured on the outside and beige coloured on the inside. For use with water up to 50°C.

Section:

5125 Glass Reinforced Plastics (GRP)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2310511

Expiry date:

31/10/2028

Approval Holder:

Gulf Eternit Industries LLC

Company Name

Gulf Eternit Industries LLC

Address

Saih Shuhaib 7, Jebel Ali, Dubai Industrial City, PO Box 1371, Dubai

Country

United Arab Emirates

View All Listings by this Company

'HDPE2300XM hose'. Off-white coloured (semi-translucent), extruded PEX-b hose. For use with water up to 85°C.

Section:

5140 Hoses & Tubing

Expiry date:

30/09/2028

Approval Holder:

Zhejiang Akan Industrial Co., Ltd.

Company Name

Zhejiang Akan Industrial Co., Ltd.

Address

No.2528 Ganshan Road, Huzhou, Zhejiang

Country

China

View All Listings by this Company