Directory Search Results

Print List

#2311368

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2311368
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression connections.
Marking:
TP on Body
Installation Requirements:
R001 R090
Expiry date:
30/11/2028
Model:
546880 Albi Tight Coil Sink Mixer Chrome

Approval Holder:
Travis Perkins PLC
Company Name
Travis Perkins PLC
Address
Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#2311362

Range of overhead shower outlets, (chrome plated ABS bodies). The inlets incorporate a plastic flow regulator. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2311362
Size:
½ BSP (F)
Marking:
Almar logo on body
Installation Requirements:
R001 R040
Expiry date:
30/11/2028
Model:
Round Emotion Shower Head D200 – D300 E044075 E044076 E044210 E044049 E044050 E044252 E044040 E044044 E044072 Square Emotion Shower Head D200 – D300 E044077 E044078 E044209 E044220 E044229 E044234 E044039 E044043 E044069

Approval Holder:
ALMAR s.r.l
Company Name
ALMAR s.r.l
Address
Viale dello Sport, 17 bis Gavirate (VA)
Postcode
21026
Country
Italy
General Email
info@almarmadeinitaly.it

View All Listings by this Company
Manufacturer:
ALMAR s.r.l
Company Name
ALMAR s.r.l
Address
Viale dello Sport, 17 bis Gavirate (VA)
Postcode
21026
Country
Italy
General Email
info@almarmadeinitaly.it

View All Listings by this Company

Print This Approval


#2401903

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 10.0 bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2401903
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Crosswater 'X' logo on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2029
Model:
PRO110DNx & PRO114DNx. Where x = the colour/finish as listed below, C – Chrome, V - stainless steel effect, F - brushed brass, M - matt black, A – anthracite, W – white, B - brushed black chrome, N - polished nickel, L - brushed nickel, Q - unlacquered brass, RG - rose gold, BGR - brushed rose gold, P – copper, BP – Brushed Copper, AP – Antique Copper, S – stainless Steel, SF – Stainless Steel Brass Effect, SM – Black Stainless Steel, G – gunmetal, UB – unlacquered brushed brass, Z – Bronze, AZ – Antique Bronze, BZ - Brushed Bronze, GR – Graphite, G- Gold & T- Slate.

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company
Manufacturer:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#2312017

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Some products are supplied with a lever type or click-type pop up waste. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2312017
Note:
Click type waste has been verified by test.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” BSP (F) captive nut end connections.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2028
Model:
31 513 xxx (without waste) 31 517 xxx (without waste) 31 915 xxx (without waste) 31 917 xxx (without waste) 31 574 xxx (click type waste) 31 518 xxx (without waste) 31 603 xxx (lever type waste) 31 607 xxx (lever type waste) 31 608 xxx (lever type waste) 31 621 xxx (lever type waste) 31 911 xxx (lever type waste) 31 578 xxx (click type waste) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as example: 000 = chrome optic finish, PVD stainless steel optic finish

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2312025

Single hole, single outlet (with additional outlets for filtered cold water), fixed, combination tap assembly (various plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The tap body incorporates an additional push type headwork that controls the flow to a second outlet. Both outlets incorporate plastic aerators. The product is supplied with a filter assembly supplied via a brass connecting tee. Models incorporate approved single check valve cartridges; however, the complete assembly has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2312025
Size:
Stainless steel braided PEX lined hose with 3/8" BSP captive nut (tap connection) and Stainless steel braided TPSiV lined hose with 3/8" BSP captive nut (filter connection).
Marking:
Hansgrohe on tap body.
Installation Requirements:
R001 R006 R009 R150 R170
Expiry date:
31/12/2028
Model:
Aqittura M91 - 76 802 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1384 of 2245

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.