Water Meters

Section Code 1505 : Meters in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009, and have not been checked for accuracy by the Scheme.

Back To Directory Sections

#241002064

Range of water meters with blue epoxy coated cast iron bodies. Maximum working pressure 16.0 Bar Maximum operating temperature 65.0°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
2” - 8” Flange
Marking:
BMETERS logo and product info on meter body. Flow arrow on valve body
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
WDE-K50
Product Images

Manufacturer:
Bmeters S.r.l
Company Name
Bmeters S.r.l
Address
Via Friuli, 3 33050 Gonars (Udine) Italy

View All Listings by this Company

Print This Approval


#241002069

Range of water meters with brass bodies, plastic turbines and plastic strainers on inlets. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2” BSP (M) inlet x 1/2” BSP (M) outlet for DN15. 3/4” BSP (M) inlet x 3/4” BSP (M) outlet for DN20.
Marking:
B METERS logo and product info meter face. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
Family GSD8 models: GSD8 – Single jet super dry water meter, dry dial, direct reading on 8 numerical rolls, GSD8-RFM – Pre-equipped for optical communication modules M-BUS wired or wireless OMS, GSD8-45 – With 45° position of the reading window. Window and 360° rotating dial allow the consumption reading from different angles, always keeping the water mater in horizontal position. GSD8-R – Pre-equipped for reed pulse output. GSD8-I – Pre-equipped for inductive modules. GSD-5 – With direct reading on 5 numerical rolls. GSFO - With special customer pre-equipped optical index on dial.
Product Images

Manufacturer:
Bmeters S.r.l
Company Name
Bmeters S.r.l
Address
Via Friuli, 3 33050 Gonars (Udine) Italy

View All Listings by this Company

Print This Approval


#240502070

Range of in-line water meters with composite bodies, TPE gasket and NBR ‘O’-ring(s). The products have an integral plastic filter. The inlet of the in-line models includes a non-return valve. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1¼” BSP (M).
Marking:
“ARAD” Logo, CE and production year on the cover. Flow arrow on body
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
PD25 Q3=6.3 POLYMER body INLINE METER .

Approval Holder:
Arad GROUP Ltd.
Company Name
Arad GROUP Ltd.
Address
Kibbutz Dalia 1923900 Kibutzz Dalia
Country
Israel
Phone
+972-4-9897906
General Email
Dars@arad.co.il

View All Listings by this Company

Print This Approval


#2112373

Jet range of water meters with brass blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure16.0 bar. Maximum operating temperature 85°C.

Section:
1505 Water Meters
Size:
see model
Marking:
JET, WRAS and other technical info on dial.
Installation Requirements:
R001 R120
Expiry date:
31/12/2026
Model:
¾” BSP (M) 172033 JET NON PULSED COLD WATER METER 15 FTG 172035 JET PULSED COLD WATER METER 15 FTG 172041 JET PULSED HOT WATER METER 15 FTG 1” BSP (M) 172034 JET NON PULSED COLD WATER METER 20 FTG 172036 JET PULSED COLD WATER METER 20 FTG 172042 JET PULSED HOT WATER METER 20 FTG 1 ¼” BSP (M) 172037 JET PULSED COLD WATER METER 25 FTG 172043 JET PULSED HOT WATER METER 20 FTG 1 ½” BSP (M) 171038 JET PULSED COLD WATER METER 32 FTG 172044 JET PULSED COLD WATER METER 20 FTG 2” BSP (M) 172039 JET PULSED COLD WATER METER 32 FTG 172045 JET PULSED COLD WATER METER 20 FTG 2 ½” BSP (M) 172040 JET PULSED COLD WATER METER 32 FTG 172046 JET PULSED COLD WATER METER 20 FTG

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#240602077

Range of water meters with brass bodies and plastic impellers. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN15, DN20, DN25, DN32, DN40, DN50.
Marking:
Aquamotion, WRAS and technical information on meter face. Flow arrow and size on body.
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
MJH range.

Approval Holder:
Aquamotion
Company Name
Aquamotion
Address
Unit 7 Woodland Close Mansfield Nottinghamshire
Postcode
NG21 9BF
Country
United Kingdom
Phone
01623 664030
General Email
info@aqua-motion.co.uk

View All Listings by this Company

Print This Approval


#241002081

Range of in-line water meters with brass bodies and plastic turbines. The inlets incorporate plastic filters, and the outlets incorporate non-return valves (not suitable for backflow protection). Maximum working pressure 16.0 Bar. Maximum operating temperature 65.0°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M) ¾” BSP (M
Marking:
GWF, model code and other info on meter box
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
Sonico Nano DN15 Q3=2,5 R*** Sonico Nano DN20 Q3=2,5 R*** Sonico Nano DN20 Q3=4 R*** Body lengths DN15: 105 mm / 110mm / 115mm/ 134m / 142mm / 145mm / 160mm / 165mm / 170mm / 190mm / 220mm DN20: 105mm / 110mm / 115mm / 139mm /160mm / 165mm / 190mm / 220mm

Approval Holder:
GWF AG
Company Name
GWF AG
Address
Obergrundstrasse 119 Lucerne
Postcode
6005
Country
Switzerland
Phone
+41 41 319 51 77
General Email
moritz.roettger@gwf.ch

View All Listings by this Company

Print This Approval


#2309381

Range of water meters with brass bodies and EPDM ‘O’-rings and plastic strainer on inlet. Maximum working pressure 16 bar. Cold water use only.

Section:
1505 Water Meters
Size:
1 1/4” BSP (M) 1 ½” BSP (M) 2” BSP (M)
Marking:
Resideo & technical information on dial face. Flow arrow cast on body.
Installation Requirements:
R001
Expiry date:
30/09/2028
Model:
EW1100CC2800 EW1100CC3900 EW1100CC4600 EW1100CM2800 EW1100CM3900 EW1100CM4600 - DN25, DN32 and DN40

Approval Holder:
Pittway Sarl
Company Name
Pittway Sarl
Address
A3 - ZA La Pièce 6 1180 Rolle
Country
Switzerland

View All Listings by this Company

Print This Approval


#2310403

Range of water meters with epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1505 Water Meters
Size:
2½” BSP (M) connection. DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300 flanged connections.
Marking:
Resideo & Technical information on face. Size and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/10/2028
Model:
EW1710AC5000 EW1710AC5600 EW1710AC6500 EW1710AC7300 EW1710AC8100 EW1710AC8500 EW1710AC8900 EW1710AC9100 EW1710AC9200

Approval Holder:
Pittway Sarl
Company Name
Pittway Sarl
Address
A3 - ZA La Pièce 6 1180 Rolle
Country
Switzerland

View All Listings by this Company

Print This Approval


#2312803

SJC range of water meters with brass bodies and plastic turbines. The inlet incorporates a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Size:
¾” BSP (M) inlet/outlet (DN15). 1” BSP (M) inlet/outlet (DN20). 1¼” BSP (M) inlet/outlet (DN25). 1½” BSP (M) inlet/outlet (DN32) 2” BSP (M) inlet/outlet (DN40)
Marking:
Aquamotion, year of manufacture (yy), Model & technical info on dial facer. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/12/2028
Model:
SJC

Approval Holder:
Aquamotion
Company Name
Aquamotion
Address
Unit 7 Woodland Close Mansfield Nottinghamshire
Postcode
NG21 9BF
Country
United Kingdom
Phone
01623 664030
General Email
info@aqua-motion.co.uk

View All Listings by this Company

Print This Approval


#241202032

Range of inline water meters with brass bodies (blue or red epoxy coating). The inlet incorporates a plastic strainer. Maximum working pressure 16.0 Bar. Maximum operating temperature 85.0°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M) to 2 ½” BSP (M).
Marking:
B METERS logo, model code and other technical information on meter face. B METERS logo on dial cap. Flow arrow & size on body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
GMDM – Multi jet super dry water meter with glass window. GMDM-I – Multi jet super dry water meter with inductive 1 lt index for connection to external radio or mbus modules. GMDM-RFM – Multi jet super dray water meter with inductive 1 lt index for connection to external radio or mbus modules. GMDM-R – Multi jet super dry water meter with magnetic index, 1, 10, 100 or 1000 lt for connection with reed sensor pulse output.
Product Images

Manufacturer:
Bmeters S.r.l
Company Name
Bmeters S.r.l
Address
Via Friuli, 3 33050 Gonars (Udine) Italy

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 14 of 18

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.