Directory Search Results

Print List

#2312020

JG Speedfit range of push-fit fittings and manifolds for use with Polybutylene Barrier Pipe (manufactured to BS EN 7291-2:2010 ) and PEX Barrier Pipe (manufactured to BS EN 7291-3:2010) and Copper Pipe (manufactured to BS EN1057:). Operating parameters: 12.5 bar@20°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2312020
Note:
R008 to applies to models 15PWB and CM551516W
Size:
10mm – 22mm push-fit. 5/8” push-fit & ¾” push-fit. ½” & ¾” BSP.
Marking:
John Guest logo and size on body
Installation Requirements:
R001 R008
Expiry date:
31/12/2028
Model:
FEMALE COUPLER TAP CONNECTOR BSP THREAD PSE3210W 10mm x 1/2" BSP FEMALE PSE3201W 15mm x 1/2" BSP FEMALE PSE3203W 15mm x 3/4" BSP FEMALE PSE3202W 22mm x 3/4" BSP FEMALE STOP END PSE4610W 10mm PSE4615W 15mm PSE4622W 22mm PSE4628W 28mm 4 WAY MANIFOLD SFM512210E 22 x 10mm 4 PORT RAIL MANIFOLD SFM522210E 22mm x 10mm SFM522215E 22mm x 15mm BACK PLATE ELBOW 15PWB: 15mm x 1/2" BSP BULKHEAD ELBOW CM551516W: 15mm x 3/4" BSP CONVERSION CONNECTOR: NC471: ½” ID (Imperial) x 15mm Push-fit NC2324: ¾” ID (Imperial) x 22mm Push-fit

Approval Holder:
Reliance Worldwide Corporation
Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company
Manufacturer:
Reliance Worldwide Corporation
Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2311066

‘DELBRAZE’ range of copper and copper alloy braze fittings for use with copper pipe (EN1057). Maximum working pressure: 16 bar. Maximum working temperature: 85°C.

Section:
1210 Fittings for use with Tube and Pipe
Section Subtitle:
End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2311066
Size:
See models. Note all sizes are the diameter of the fitting for brazing unless otherwise states.
Marking:
Conex logo >B< and size on body.
Installation Requirements:
R001
Expiry date:
30/11/2028
Model:
5270 – Straight Coupler: 5270 067000000 – 67mm, 5270 06700000L – 67mm long, 5270 076000000 – 76mm, 5270 108000000 – 108mm, 5270 133000000 – 133mm, 5270 159000000 – 159mm. 5243 – Fitting Reducer: 5243 067028000 – 67mm x 28mm, 5243 067035000 – 67mm x 35mm, 5243 067042000 – 67mm x 42mm, 5243 067054000 – 67mm x 54mm, 5243 076035000 – 76mm x 35mm, 5243 076042000 – 76mm x 42mm, 5243 076054000 – 76mm x 54mm, 5243 076067000 – 76mm x 67mm, 5243 108054000 – 108mm x 54mm, 5243 108076000 – 108mm x 76mm, 5243 133108000 – 133mm x 108mm, 5243 159108000 – 159mm x 108mm, 5243 159133000 – 159mm x 133mm. 5009 – Metric to imperial: 5009 076024000 – 76mm x 3”, 5009 108032000 – 108mm x 4”. 5240 – Reduced Coupler: 5240 067028000 – 67mm x 28mm, 5240 067042000 – 67mm x 42mm, 5240 067054000 – 67mm x 54mm, 5240 067054000L – 67mm x 54mm, 5240 076028000 – 76mm x 28mm, 5240 076035000 – 76mm x 35mm, 5240 076042000 – 76mm x 42mm, 5240 076054000 – 76mm x 54mm, 5240 108054000 – 108mm x 54mm, 5240 108076000 – 108mm x 76mm, 5240 133108000 – 133mm x 108mm. 5041 – 45 Deg Obtuse Elbow: 5041 067000000 – 67mm, 5041 067000000L – 67mm, 5041 076000000 – 76mm, 5041 108000000 – 108mm, 5041 133000000 – 133mm, 5041 159000000 – 159mm. 5040 – Obtuse Street Elbow: 5040 067000000 – 67mm, 5040 067000000L – 67mm, 5040 076000000 – 76mm, 5040 108000000 – 108mm, 5040 133000000 – 133mm. 5090 – 90Deg Elbow: 5090 067000000 – 67mm, 5090 076000000 – 76mm, 5090 108000000 – 108mm. 5092 – Street Elbow: 5092 067000000 – 67mm. 5001A – Street Bend: 5001A067000000 – 67mm, 5001A067000000L – 67mm, 5001A076000000 – 76mm, 5001A108000000 – 108mm, 5001A133000000 – 133mm, 5001A159000000 – 159mm. 5002A – Street Elbow: 5002A067000000 – 67mm, 5002A067000000L – 67mm, 5002A076000000 – 76mm, 5002A108000000 – 108mm, 5002A133000000 – 133mm, 5002A159000000 – 159mm. 5130 – Equal Tee: 5130 067067067 – 67mm, 5130 076076076 – 76mm, 5130 108108108 – 108mm, 5130 133133133 – 133mm, 5130 159159159 – 159mm, 5130 067067067L – 67mm. 5130 – Reduced Branch Tee: 5130 067022067 – 67mm x 67mm x 22mm, 5130 067028067 – 67mm x 67mm x 28mm, 5130 067035067 – 67mm x 67mm x 35mm, 5130 067042067 – 67mm x 67mm x 42mm, 5130 067054067 – 67mm x 67mm x 54mm, 5130 076022076 – 76mm x 76mm x 22mm, 5130 076028076 – 76mm x 76mm x 28mm, 5130 076035076 – 76mm x 76mm x 35mm, 5130 076042076 – 76mm x 76mm x 42mm, 5130 076054076 – 76mm x 76mm x 54mm, 5130 076067076 – 76mm x 76mm x 67mm, 5130 108028108 – 108mm x 108mm x 28mm, 5130 108035108 – 108mm x 108mm x 35mm, 5130 108042108 – 108mm x 108mm x 42mm, 5130 108054108 – 108mm x 108mm x 54mm, 5130 108067108 – 108mm x 108mm x 67mm, 5130 108076108 – 108mm x 108mm x 76mm, 5130 133108133 – 133mm x 133mm x 108mm, 5130 159108159 – 159mm x 159mm x 108mm. 5301 – Stop End: 5301 067000000 – 67mm, 5301 067000000L – 67mm, 5301 076000000 – 76mm, 5301 108000000 – 108mm, 5301 133000000 – 133mm, 5301 159000000 – 159mm. 4270G – Female Straight Connector: 4270G067020000 – 67mm x 2.1/2” BSP (F). 4243G – Male Straight Connector: 4243G067020000 – 67mm x 2.1/2” BSP (M) 4243G076024000 – 76mm x 3” BSP (M), 4243G108032000 – 108mm x 4” BSP (M).
Product Images

Approval Holder:
Conex Universal Limited
Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company
Manufacturer:
Conex Universal Limited
Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company

Print This Approval


#2312021

Range of blue epoxy coated ductile iron flanged dismantling fittings with EPDM sealing rings. Maximum working pressure 16.0 Bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1220 Fittings for use with Tube and Pipe
Section Subtitle:
Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.
WRAS Approval Number:
2312021
Size:
DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1100, DN1200, DN1400, DN1500, DN1600 & DN1800 Flanged
Marking:
Vortex Qingdao logo and size on plate on body. Size and PN on body.
Installation Requirements:
R001
Expiry date:
31/12/2028
Model:
WD8616B

Approval Holder:
Vortex Qingdao Pipe Fitting Co., Ltd.
Company Name
Vortex Qingdao Pipe Fitting Co., Ltd.
Address
No.4, chongxiang Road, Lancun Town, Jimo District, Qingdao, Shandong Province
Country
China

View All Listings by this Company

Print This Approval


#2310061

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2310061
Note:
Direct connection to inlet valve not permitted.
Size:
2” BSP (M)
Marking:
Rongji. Date of manufacture (YYYY/MM/DD) on body
Installation Requirements:
R001 R571 R580 R581
Expiry date:
31/10/2028
Model:
A2120

Approval Holder:
Xiamen R&J Precision Technology Co., Ltd.
Company Name
Xiamen R&J Precision Technology Co., Ltd.
Address

View All Listings by this Company
Manufacturer:
Xiamen R&J Precision Technology Co., Ltd.
Company Name
Xiamen R&J Precision Technology Co., Ltd.
Address

View All Listings by this Company

Print This Approval


#2310323

Range of manually operated and sensor operated dual flush WC outlet valves. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2310323
Size:
1 ½” BSP (M), 2” BSP (M).
Marking:
Wirquin moulded on body.
Installation Requirements:
R001 R571 R580 R581
Expiry date:
31/10/2028
Model:
JOLLYFLUSH – 81811129, JOLLYFLUSH – 10120446, JOLLYTRONIC – 10120021.
Product Images

Approval Holder:
Wirquin Ltd
Company Name
Wirquin Ltd
Address
Unit 3 Alpha Court Thorne Doncaster
Postcode
DN8 5TZ
Country
United Kingdom
Phone
01302 312252
General Email
mick.kirby@wirquin.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1248 of 2316

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.