‘Sikagard®-1814 - RAL 7035’. Site applied, grey coloured (once mixed), two-component epoxy polysulfide resin coating. Mix Part A (light grey, opaque liquid) and Part B (light yellow, translucent liquid) in a 78:22 weight ratio and apply 2 coats as per manufacturer’s TDS ‘MBS_CC-UAE/Pr_1814_06_23/v1/01_24’. Cure coat 1 for 9 hours@25°C. Cure coat 2 for 14 days@25°C. For use with water up to 50°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5046 Coatings, Paints & Linings

Section Subtitle:

Site applied cistern coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2307541

Expiry date:

31/07/2028

Approval Holder:

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Company Name

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Address

Head Office: P.O. Box 37127, Dubai Investment Park, Phase 1 Expo Road, Dubai

Country

United Arab Emirates

View All Listings by this Company

'Klinger K10'. White coloured, braided compression packing. For use with water up to 85°C. For use only as a gland packing material having been tested at a reduced surface area to volume ratio.

Section:

5100 Gland Packings

Expiry date:

28/02/2029

Approval Holder:

Klinger Ltd.

Company Name

Klinger Ltd.

Address

Wharfedale Road, Euroway Trading Estate, Bradford, Bradford

Phone

Tel: 01274 688222

View All Listings by this Company

'Icorene 1613 BK85 DW Black'. Black coloured, rotomoulded LLDPE material. For use with water up to 85°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240155043

Expiry date:

31/01/2029

Approval Holder:

Schulman Gainsborough Ltd. (A Lyondell Basell Company)

Company Name

Schulman Gainsborough Ltd. (A Lyondell Basell Company)

Address

Sandars Road, Heapham Road Industrial Estate, Gainsborough, Lincs.

Postcode

DN21 1RZ

View All Listings by this Company

'Icorene 1440 NAT & Icorene 1440 BLK 9001'. Natural (appears off-white) & black, rotationally moulded polyethylene materials. For use with water up to 23°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240355007

Expiry date:

31/03/2029

Approval Holder:

Schulman Gainsborough Ltd. (A Lyondell Basell Company)

Company Name

Schulman Gainsborough Ltd. (A Lyondell Basell Company)

Address

Sandars Road, Heapham Road Industrial Estate, Gainsborough, Lincs.

Postcode

DN21 1RZ

View All Listings by this Company

‘4TECH 9S20000 W-A-ABK 01 0A QF, 4TECH 9S22130 W-A-ABK, 4TECH 9S22110 W-A-ABK & 4TECH 9S22120 W-A-ABK’. Black coloured, injection moulded PPO & PPO/HIPS materials. 4TECH 9S20000 W-A-ABK 01 0A QF is an unfilled PPO material suitable for use with water up to 23°C. 4TECH 9S22130 W-A-ABK, 4TECH 9S22110 W-A-ABK & 4TECH 9S22120 W-A-ABK are filled PPO/HIPS materials suitable for use with water up to 85°C.

Section:

5250 Polyphenyleneoxide (PPO)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240255032

Expiry date:

28/02/2029

Approval Holder:

Safic-Alcan UK Ltd.

Company Name

Safic-Alcan UK Ltd.

Address

812 Fountain Court, Birchwood Boulevard, Warrington

Postcode

WA3 7QZ

View All Listings by this Company